How to move Left and Right audio components

At a performance, there was a delay between what my camera recorded from a soundboard on the left track and what it recorded from a shotgun mic on the right track.
I want to move each track (Right and Left) independent of each other using FCP 10.1.2
So far I have successfully changed the audio from Stereo to Dual Mono and I have Expanded Audio Components.
I am not able to move either track.  No matter wether position or arrow is selected I looks like a range selection over the track and it will not move.
Any help would be greatly apreciated!

Yes, that screen shot of your Cam5 video and its right and left audio being staggered is exactly what Im trying to do.  Im sorry I have not been able to describe this better.
It was the “Detach Audio” option that was giving the messy appearance.
This time I only made two adjustments done in the Timeline.
I followed these two steps:
     1.  I select the clip on the Timeline and chose “Expand audio components”
     2.  Then selected the video clip again and chose “Dual Mono”
Here is a screen shot of what it looks like now:
Just like before, I can manipulate the audio levels but when I attempt to drag either audio a box is drawn over the clip that looks like the “range select” tool.  This happens when I have either arrow or position is selected.  Nothing can be moved.  I tried these two basic steps on my other computer using an older version of FCPX and get the same result.
The work around that I described above allowed me to finish this project by my deadline but this is still something I would like to learn since it’s a pretty basic function of FCP that I need to be able to do a lot.
Thank you Tom for your continued help and guidance.

Similar Messages

  • How to group Left and Right audio tracks from a .OMF file?

    Hi, i'm editing the sound of my short film, i've sent a .OMF to audition from premiere, but the left and right tracks are seperate tracks in the multitrack session, how would i group them so whatever i do to one channel, will be done to the other

    This is because the OMF specification requires mono audio files
    It really depends on what you are trying to do with the two tracks as to the best answer as far as 'grouping'
    You could select all the clips on both tracks and right mouse click and select 'group'
    You could send both tracks to a bus
    You could export the two tracks to a stereo file and bring that back into the session
    Lots more things I'm sure but a little more detail as to what you are trying to do would help

  • How to separate left and right audio channels?

    I've imported some AVCHD footage that had audio recorded separately to each channel, left and right.  When I put a clip in my timeline, I can separate the audio tracks, but I can't edit them individually.  When I bring down the level to 0db on one track and play the clip, the audio meter still shows equal levels on both left and right channels.  Any advice?
    Second question - I transcoded some AVCHD footage to MP4 and can't figure out if the audio tracks remain separte after the transcoding.  I used Free MTS M2TS Converter to do the transcoding.  While I can choose 'dual mono" for an AVCHD clip, I do not have that same option for the MP4 clip.  It offers me "6 mono" but not dual mono. Any advice?
    My concern is that when I provide my clients with raw MP4 footage with right and left audio recorded separately, that they'll be able to edit each track individually. 
    Thanks!

    Thanks Tom.  I recorded 2-channel audio, not 5.1 surround.  Six mono was only an option on the MP4 clip.  I did change the channel configuration from stereo to dual mono on the AVCHD clip, but I still wasn't able to edit the audio independently.  Even when I mute one track, the audio meter still shows equal left and right levels.

  • How can I separate Left and right audio channels in labview 8.5 tia sal22

    How can I separate Left and right audio channels in labview
    8.5 tia sal22
    Greetings All
    I have a working Labview vi that converts a math formula to an
    audio signal.  I would like to have the
    right and left audio channels playing different math audio signals is this
    possible?
    Example
    Right channel -> plays the audio signal created by a math
    formula
    Left channel -> plays the audio signal created by another
    math formula with adjustable phase control
    I’ve included a VI with a working audio and math formula but
    I’m not sure how to separate the left and right channels.
    I’m using labview 8.5
    I looked up a similar question on the
    support board and it said” use an instance of the the Sound Output Write that
    has a 1D waveform data type input (i.e.  Sound Output Write (DBL)). Each
    element in the array would correspond to a channel.”
    But I’m not exactly sure what he meant.  I’m using a formula to generate the wave file
    Tia sal22
    Attachments:
    fixed mathscript formula to sound test.vi ‏680 KB

    Sorry it took so long to get back.  Here's the new VI with it splitting out the left and right channels. 
    I'm using a Gigaport HD 8 output usb audio device but I'm experience clicks and pops.  I increase the buffers
    but I still get the clicks and pops.  I know gigaport HD can use ASIO drivers which most likely would solve the problem but one needs to code in C for this which I'm not proficient in.  Can someone recommend a work around to prevent this clicks and pops, can I somehow change my VI to fix this? Does anyone have a VI that will allow access to the ASIO latency properties?
    I'm using labview 8.5
    And a gigaport HD which is a USB audio device which outputs 8 analog signals (it is ASIO compatible)
    tia sal22
    Attachments:
    lvt_audio_realtime-out left right device ID test.vi ‏68 KB

  • Left and right audio in VCD

    The VCD dramas that i bought consist of left and right audio that are of different language. Is there any program that i can use to convert the whole movie into mp4 movie with just one language ?
    thanks

    Select the clip in the timeline and open the audio tab in the inspector. Under the audio configuration label click the drop down arrow at the right and change stereo to dual mono. Go back to the timeline and right click the clip and select expand audio components. You can them change the volume of the two audios independently. After adjustment right click the clip again and choose collapse audio components.

  • My ipod's music quality is inferior. It doesnt have the surround sound/ left and right audio channel unlike my brothers ipod? is there a problem with the chip?

    I have an ipod touch 4g (8GB), I got this about 2.5 months ago, the same time my brother get his. My problem is that I noticed that audio quality is better on his device than mine. I have been listening to music and had different music devices before (non-Apple product and mobile phone) and the quality of music is better when I used to listen to those devices as well as my brother's ipod touch. Im referring to the left and right audio channels. Im not so good about the technical stuff but the best explanation I can give you is in a music or a movie, there's an effect wherein you can here a sound only at the left ear phone/speaker that you cant hear at the right earphone/speaker. I mean for example in a song, a guitar intro can be heared only at the left
    ear while the background music plays on the other ear. Or when theres and echo effect on the song that alternates sound on the left and right ear. I hope youre getting what Im trying to say. Im bothered that my ipod is fake or has an internal problem on the chips or something because I didnt bought this at an Apple Center/Mac Center. I bought it on a retailer. I am not able to visit any store or Genius Bar  or contact an apple specialist through phone because of my work schedule and work load.  I have contacted the retailer before when I tried to return it for replacement or repair but he told me that it is under Apple's warranty, not theirs. I do hope that I can get a help from you because I want to really enjoy my device. Thank you and Im looking forward for the responce/assistance form you.

    I suggest you don't apply pressure to the screen - it's a Touch - you touch the screen not push it.
    Phil

  • ? how to add page numbers in pages 5.2, starting with 2.  Pages '09 had an option to not show folio on page one.  Also any how to do left and right folios for a Tabloid?  Many trhanks

    ? how to add page numbers in pages 5.2, starting with page 2.  Pages '09 had an option to not show folio on page one.  Also any idea how to do left and right folios for a Tabloid?  Many thanks  . . .

    Hello jacquemac,
    Your first question:
    There might be a better way of achieving what you wish to do, but following these steps could help you out.
    You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
    1. go for Documents (right end of the Toolbar) -> Section
    2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
    (what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
    3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
    4. click on your second page (the first page of your second section) and  "Insert page number" -> start at 1
    Your second question:
    Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
    greetings jl

  • HT4108 What is required to use the video composite out on the iPhone 4.  Left and right audio works ok

    What is required to use the video composite out on the iPhone 4   The left and right audio works ok

    Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

  • Left and right audio is cancelling out when I stream from macbook to apple TV2

    When I stream from iTunes on my Macbook to my Apple TV the left and right audio sounds like it is cancelling each other out, meaning the lead vocal on songs is very low in the mix.  Anyone know why this is happening?

    Well there is something definitely wrong. If track is panned to left channel and the output virtual LEDs show left channel only then it has to be a problem somewhere else. Are you using a digital interface or the 1/8" audio out to mixer, headphone.

  • How to split left and right sound signal from SI READ Stereo?

    How to split left and right sound signal from SI READ Stereo?
    I want to display the left and right sound signal in two graph separately,what shall I do?
    That is how to split 2D arry to two 1D arry?

    Hello,
    Here's another trick...although the "Index Array" suggestion will work, you should investigate using the "Delete from Array" function...you can tell it to delete one of the columns (or rows), leaving one column (or row)...the function will output both the resulting array AND the deleted array, which happens to be the other row/column...this method might not be as intuitive, but it only makes one copy of data in memory, while the Index Array method makes two copies.
    I hope this suggestion helps. I only found out about this trick with "Delete from Array" the other day.
    Have a great weekend!
    Sincerely,
    Darren Nattinger
    Applications Engineer
    National Instruments
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • How can I combine Left and Right audio?

    Hi,
    When I record video, one lapel mic records to the left channel and the other records to the right channel in one audio track. I can't seem to figure out how to combine them within Premiere Pro (I've already attempted searching the forums for more info). I know in Sony Vegas you can right click the single audio track and select "Combine" and it will combine the 2 channels so that when people watch the end product you have both voices coming out of both speakers.
    Any help would be appreciated.
    Thanks
    Kelly G.

    Hello,
    Yes i have the same issue.
    I use the duplicate Audio track and fill left and right all the time.
    when i am doing Interview videos i usually have one person on channel 1 and the other on channel 2 and it comes out as L and R in Premiere.
    Today i was shooting with myself on Channel 2 and a shotgun for some ambient sound on channel 1.
    In Vegas or FCP 7 there is a simple effect to drag and drop called " Combine" that nicely combines the L and R channels each into stereo.
    I used to use it quite a bit and think it would be a great addition to Premiere Pro.
    So i am wondering several years since this was first post if Premiere does in fact now have this option...and where it might be that i over looked it?
    If not.....is there an easier way to do this than the fill left and right method?
    Thanks so Much!
    Mark

  • How to separate left and right channel in audiotracks

    I would like to adjust audio tracks left and right channels separetly from each other. Now the volume levels are linked together. Is there a way to separate them?
    Other question is ; for some reason the pan slider in viewer does not seem to have left/right affect but kind of mono/stereo affect. It is supposed to be so, or do I have some audio preference button in wrong position?
    Message was edited by: TRST

    To answer to myself: Go to the User Manual and read the Chapter Audio Editing Basics from page 425.
    Or click the clip in timeline which you want to change, and go to Modify---> uncheck the stereo pair option in there.

  • How to send left and right of stereo sources to different targets?

    Hi
    Suppose I have an instrument track or audio track in stereo, and I want to send the left side of it to one bus and the right side to another bus, is there an easy way of doing this without creating two duplicate tracks (and panning one hard left and the other hard right)?
    Similarly, suppose I have routed a track into a bus which contains an effect, a phaser for example, which is in stereo, and I want to put a delay on just the right and side but not on the other. Is there an easy way of doing this (without for example routing the output of the phaser bus to two separate busses and panning them hard left and right and then routing the right bus to another bus which contains the delay)?
    Thanks if anybody has any suggestions, I'm playing around with this sort of stuff at the moment but its gettings too spaghetti. Am I being daft and the ability is there I just haven't found it in the manual?

    Well, I did just what you´re asking about the other day. In order to process a stereomix with MS technique, I needed to send the left channel to bus 1, the right to bus 2. So I turned off Universal Track Mode. This enabled me to route the output to Bus 1-2 instead of Output 1-2.
    I believe this should work for you, too. It´s a bit fiddly, and you mustn´t forget to turn Universal Track Mode back on if you continue with another project. Otherwise things might get very complicated indeed.
    /j
    Message was edited by: juhani h.

  • Carousel  Appearance. How to narrow Left and right margins (ADF 11.1.2)

    Hello,
    I need help to adjust the appearance of a carousel component.
    As you can see in the picture i need more space for the current page of carousel (need to enlarge the current page) and i want to narrow the space marked with a red line (left and right).
    Property settings available do not help.
    Can anyone have an idea?
    [http://i52.tinypic.com/28arlma.png]

    Hi,
    did you try skinning ?
    http://download.oracle.com/docs/cd/E16162_01/web.1112/e16181/af_skin.htm#BAJFEFCJ
    The skin tag documentation is here
    http://download.oracle.com/docs/cd/E16162_01/apirefs.1112/e17497/toc.htm
    Just have a look for what is available for af:carousel (and note the new skin editor)
    Frank

  • Premiere Elements 13 (not Pro), recorded a video with mono mic input (left channel only), need to create 2-channel (left and right) audio track for finished product. Help?

    The question says it all. I have been all over the tutorials as well as the menus inside Premiere 13 and cannot find how to edit the audio track beyond basic balance, volume, etc.
    I can see the Audio 1 track, shows audio in left channel only, but it will not respond to attempts to select, cut/copy, paste, etc.
    Basically I just want to turn one-channel audio into two-channel audio.

    25424...
    Sure you do not want to give the Fill Left and Fill Right another try?
    According to the Adobe document Adobe Premiere Elements Help | Effects reference
    Fill Left, Fill Right
    The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information. The Fill Right effect duplicates the right channel information and places it in the left channel, discarding the existing left channel information. For example, you might use this effect on footage shot with a monaural microphone plugged into only one channel of a camcorder, extending the voice of a speaker from one channel to both.
    From what you wrote, your Premiere Pro video seems to be saying the same.
    If that Premiere Elements Fill Left or Fill Right is no go, you might want to explore what you can do in this regard using the free audio editor Audacity.
    Audacity: Free Audio Editor and Recorder
    And, then import the Audacity edited audio back into Premiere Elements project as source media.
    Is the speaker system OK?
    We will be watching for your results.
    Thanks for the follow up.
    ATR

Maybe you are looking for