How to move multiple components into a Tab Component and still keep layout?

I have created a Combination Chart with multiple combo boxes and a slider on my Xcelsius Canvas. Now, I realize that I want to put all of this into a Tab Set Component. How can I move everything into this new Tab Component without messing up all the layout and alignment I have done on all my components already? I tried shift-selecting everything and doing a drag --> drop into the Tab Canvas but they just all stack on top of each other.
Can this be done? Would it be wiser to start a new Xcelsius document, place a Tab Set Component on the canvas and then copy --> paste from the original document into the new one? I'm reluctant to do this though (even within the same document) because it forces all components to be renamed back to their defaults such as Chart 1, Combo Box 1, etc etc.
Edit:
Bolded my biggest concern on this topic, can components be copy/pasted or cut/pasted and still retain their original name?

i think this scenario would work fine for you
choose all the components you want to move from the "Object Browser"
you can show the Object Browser from the View Menu
after you select them all, you can drag them to your Tab component
or you can make them as a group, so it will be easy to move them as the same layout they have.
to make them as one group
select them all, go to format menu, and select Group
now you have all of them as one item, move them to the tab and then you can ungroup them the same way
good luck
Amr

Similar Messages

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.

I added a photo from camera roll to a created album,how can I delete that photo from camera roll and still keep photo in album

I added a photo from camera roll to a created album, how can I delete that photo from camera roll and still keep same photo in album?

You can't. It doesn't work that way.
the new album that you created doesn't contain a copy of the actual photo. It contains a pointer to that photo. If you delete it from the camera roll, you will delete it from the album that you created as well. Albums that you create on the iPad in the Photos app are for local organization only and cannot be transfer or imported to your computer, because there really are no photos in those albums

How can I do a assumption of liability transfer and still keep my number?

I want to do an assumption of liability transfer for the two lines on an account, but I want to port my numbers to a new carrier before the contract is transferred. How do I go about doing this? Thanks
-Aaron

There are 4 lines on an account, two are month-to-month, and two are in contracts until next year. The two month to month lines would have their numbers ported to another carrier and Verizon service canceled.
We want to transfer just the two contracts to another person with an AOL and transfer our two phone numbers to that other carrier for us to keep.
Other carriers charge less than Verizon, and don't lock us into contracts, or charge high rates for data.

How to move a selection into another selection in elements 12

how to move a selection into another selection in elements 12

Open picture B, the one you wish to select something from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and object B on a separate layer

How to move multiple images in applet

Hi,how to move multiple images in applet or random images in applet .
Means moving images.gif around the applet with different starting point ,help me to create that move method ..

why don't you check the tumbling duke applet as provided free in this site? :-)

How to Pass multiple parameter into single store procedure

How to Pass multiple parameter into single store procedure
like a one to many relationship.
it is possible then reply me immediatly

you mean like this .....
CREATE OR REPLACE procedure display_me(in_param in varchar2,in_default in varchar2 := 'Default') is
BEGIN
DBMS_OUTPUT.put_line ('Values is .....'||in_param || '....'||in_default);
END display_me;
CREATE OR REPLACE procedure display_me_2 as
cnt integer :=0;
BEGIN
For c1_rec In (SELECT empno,deptno FROM test_emp) Loop
     display_me(in_param => c1_rec.empno);
     cnt := cnt+1;
     end loop;
     DBMS_OUTPUT.put_line('Total record count is ....'||cnt);
END display_me_2;
SQL > exec display_me_2
Values is .....9999....Default
Values is .....4567....Default
Values is .....2345....Default
Values is .....7369....Default
Values is .....7499....Default
Values is .....7521....Default
Values is .....7566....Default
Values is .....7654....Default
Values is .....7698....Default
Values is .....7782....Default
Values is .....7788....Default
Values is .....7839....Default
Values is .....7844....Default
Values is .....7876....Default
Values is .....7900....Default
Values is .....7902....Default
Values is .....7934....Default
Values is .....1234....Default
Total record count is ....18

Move multiple events into one album

Hi,
I am trying to tidy up our photos on iPhoto.
Is there a fast, easy way to move multiple 'Events' into one 'Folder'
For example:
We have all of our photos from our honeymoon in Europe saved as seperate 'Events' According to the location. It was a 3 month trip so there are a lot of 'Events' or locations. Is there a way i can select all of them and put them into the Honeymoon 'folder' without them all merging into one big album?
I want to keep them as separate events within the folder so we can remember where they were taken.
I have been trying to drag the 'Event' over to the Honeymoon 'Folder' but instead of just going straight in there it creates a new unnamed folder on the left panel, and then i have to drag the event up to the honeymoon folder and delete the unnamed folder. It is proving rather time consuming and i have over 12000 photos to sort.
Any help would be great. Simple terms please!!
Thanks

lf you drag an event onto a folder in the left hand pane the photos in that Event will be added to a new album in that folder with the same name as the Event. .
OT

HT4059 I'm trying to organize my PDFs in iBooks on my ipad2 and I can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

How to move multiple clips with transitions?

Im still transitioning from FCP7 to FCP 10.1.2 and can't believe I have missed the lesson that explains how to move multiple clips with transitions.
Up till now I have tried several work arounds including deleting all the transitions then using the (P) Position tool to move the clips from the primary track to some track above it then re adding all the transitions. This is a function I do on a daily basis. Am I missing something? Please help!
Thank you

With some further investigation, the transitions have nothing to do with my problem. In my case there was a tiny “Black gap slug” within the group that was preventing me from being able set it on top of another group of clips or gap someplace. But even with the gap removed… I can move the clips on top of another group but the transitions stay behind on the primary (Magnetic)
In the screen shot you can see what happens when I move a group out of the primary (magnetic) timeline onto a gap. All the transitions get left behind.
Ive notices that Cutting and pasting will only paste the sequence some other place on the primary (magnetic) timeline for me.
An example of why I would want to put a cropped/ resized group on top of another group is to do picture in picture effects or if I wanted to create a background behind a set of adjusted clips.

How to scan multiple photos into separate

I have a hp envy 5660. I often have to scan multiple photos and on my old printer it would show them as individual files on the scan page. I can't figure out how to do that with this printer. I want to scan multiple photos, have them save as individual phhotos so I can print them out on 4 x 6 photo paper. Any ideas? Thanks!

Hi @bird22557,
Welcome to the HP Forums!
I noticed that you are wondering how to scan multiple photos into separate files with your HP Envy 5660 printer on Windows 7. I am happy to look into this scanning issue for you!
I would recommend to go through this how to scan guide, Scan from Windows 7 With the Full Feature HP Software for HP Multifunction Printers, you can try with HP software or without HP software. As there are multiple ways of scanning.
For future reference, here is your printer's user guide as well, HP ENVY 5660 e-All-in-One Printer User guides.
Hope this helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

Hi All,
Hope to you a very happy new year,
I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
So my quetion is below:
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Thanks in Advanced,
Ahmed,

To add to Scott's post. Option 60 would be useful if you needed to put certain types of AP on specific controllers. Otherwise, no real need to use it for the most part.
Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
Now, on an IOS switch, you can only configure one option 60 per DHCP scope
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

How to set multiple styles on a single component in flex ?

Hi ,
I would like to know how to set multiple styles on a single component in flex.
Can anyone give me an example as to how to set multiple styles for a single component ?
Thanks ,
Regards,
Ajantha

Hi tuliptaurus,
You can setStyleName property for chnaging the external css dynamically by using the setStyle() method ...
btn.setStyle("styleName","blendButtonSkinOther");
You can change the external css by using the styleaName property with setStyle method..the line in blue..where blendButtonSkinOther is another css class..
blendButtonSkin {
    fontFamily: Arial;
    fontSize: 11;
    color: #F1F1F1;
    textRollOverColor: #F1F1F1;
    textSelectedColor: #F1F1F1;
    horizontal-align:center;
    width:150;
    height:30;
    cornerRadius:5;
    upSkin:ClassReference('assets.skins.BlendButtonSkin');
    downSkin:ClassReference('assets.skins.BlendButtonSkin');
    overSkin:ClassReference('assets.skins.BlendButtonSkin');
    disabledSkin:ClassReference('assets.skins.BlendButtonSkin');
    selected-up-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-down-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-over-skin: ClassReference('assets.skins.BlendButtonSkin');
blendButtonSkinOther {
    fontFamily: Arial;
    fontSize: 11;
    color: #F1F1F1;
    textRollOverColor: #F1F1F1;
    textSelectedColor: #F1F1F1;
    horizontal-align:center;
    width:150;
    height:30;
    cornerRadius:5;
    upSkin:ClassReference('assets.skins.BlendButtonSkin');
    downSkin:ClassReference('assets.skins.BlendButtonSkin');
    overSkin:ClassReference('assets.skins.BlendButtonSkin');
    disabledSkin:ClassReference('assets.skins.BlendButtonSkin');
    selected-up-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-down-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-over-skin: ClassReference('assets.skins.BlendButtonSkin');
Thanks,
Bhasker Chari

As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know each Java Class that is involved in flow.

As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know how flows goes to the server and server understands the method which is to be called of managed bean. I know it is with annotation @ManagedBean and method name, but how Call is binded with annotation @ManagedBean.
In short, i want to know the internal implementation of JSF Framework.

As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know how flows goes to the server and server understands the method which is to be called of managed bean. I know it is with annotation @ManagedBean and method name, but how Call is binded with annotation @ManagedBean.
In short, i want to know the internal implementation of JSF Framework.

*** Question How to load a file into BI-Integrated Planning and use WAD 7.0

Hi, I created an manual DTP upload to my planning infocube and it works fine. The transformation rules convert 0CALMONTH into the relevant Calendar and Fiscal characteristics. So all of my Time Characteristics are fine, both Calendar and Fiscal.
However, When using the "How to load a file into BI-Integrated Planning and use WAD 7.0" solution, only the Calendar Characteristics are populated and not the Fiscal. The upload application somehow knows to populate the 0CALMONTH2, 0CALQUART1, 0CALQUARTER, and 0CALYEAR.
How can I get the upload to populate my Fiscal Period Characteristics?
Would it be best to modify the "Upload Application, or can I write a planning function to update the fiscal characteristics, or some other way?
Thanks!

My planning data is being uploaded via the SDN Planning File Upload Solution. What I did was end up modifiying the upload class ZCL_RSPLF_FILE_UPLOAD Method EXECUTE.
I added the following code if anyone is interested.
*{ INSERT BWDK902323 1
THIS SECTION OF CODE POPULATES THE FISCAL PERIOD CHARACTERISTICS
USING THE FISCAL YEAR VARIANT 'NK' AND THE CALENDAR MONTH/YEAR
FIELD-SYMBOLS <0FISCVARNT> TYPE /BI0/OIFISCVARNT. " Fiscal Year Variant
FIELD-SYMBOLS <0FISCYEAR> TYPE /BI0/OIFISCYEAR. " Fiscal Year
FIELD-SYMBOLS <0FISCPER> TYPE /BI0/OIFISCPER. " Fiscal Year/Period
FIELD-SYMBOLS <0FISCPER3> TYPE /BI0/OIFISCPER3. " Posting Period
FIELD-SYMBOLS <0CALMONTH> TYPE /BI0/OICALMONTH. " Calendar Month/Year
ASSIGN COMPONENT '0CALMONTH' OF STRUCTURE <L_S_DATA> TO <0CALMONTH>.
ASSIGN COMPONENT '0FISCPER' OF STRUCTURE <L_S_DATA> TO <0FISCPER>.
ASSIGN COMPONENT '0FISCVARNT' OF STRUCTURE <L_S_DATA> TO <0FISCVARNT>.
ASSIGN COMPONENT '0FISCPER3' OF STRUCTURE <L_S_DATA> TO <0FISCPER3>.
ASSIGN COMPONENT '0FISCYEAR' OF STRUCTURE <L_S_DATA> TO <0FISCYEAR>.
<0FISCVARNT> = 'NK'.
CALL FUNCTION 'FISCPER_FROM_CALMONTH_CALC'
EXPORTING
IV_CALMONTH = <0CALMONTH>
IV_PERIV = <0FISCVARNT>
IMPORTING
EV_FISCPER3 = <0FISCPER3>
EV_FISCPER = <0FISCPER>
EV_FISCYEAR = <0FISCYEAR>.
*} INSERT

How to move multiple components into a Tab Component and still keep layout?

Similar Messages

Maybe you are looking for