How to move newly created ringtones on itunes with extension mr4 to ringtones

I have created ringtones using i tunes. I had no problem creating them, they play well and appear under music in iTunes. One thing that I am unable to solve, is that i can't move the ringtone from music to ringtone tab on the right. I tried dragging it, didn't work. And I also made sure the tones were checked in preferrences. Does anybody can help me or guide me with the issue, will appreciate that.

Chris, you are incredible! Can't tell you how much happier and grateful to you. I was struggling last evening for hours and so frustrated.
It worked. And you explained so well each step.
You will be my first choice to ask something if I need.
I wish I could give you one million points for that.
Cheers.

Similar Messages

I activated a new device for my ipod. I can not figure out how to sync newly purchased songs from iTunes onto my iPod.

I activated a new device for my ipod. I can not figure out how to sync newly purchased songs from iTunes onto my iPod.

Hi there,
I would recommend taking a look at the information found in the articles below. The first two articles have the same content, but are geared towards either OS X or Windows.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
-Griff W.

When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it

When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it?

The issue is that your credit or debit card credentials must be associated with the same country where you reside in order to purchase iTunes content.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

TS2446 I forgot my security questions how do I buy some thing on iTunes with out them?

I forgot my security questions how do I buy some thing on iTunes with out them?

See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us
Call Apple Support in your country: Customer Service: Contacting Apple for support and service

TS1314 how can we transfer jpg file to ipad4 with extension name

how can we transfer jpg file to ipad4 with extension name

See:
iOS and iPod: Syncing photos using iTunes
What do you mean by "with extension name"?

How to save newly created patch?

As a follow up to an earlier question:
I was looking for a real specific sound that is on the Motif XS. I created a project with 4 tracks. I opened the environment window and highlighted all 4 tracks. I created a new layer. With the 4 tracks highlighted, I option clicked into my new layer which 'jumped' the 4 tracks into my new layer.
I created a new instrument object on the layer and cabled all 4 tracks to the instrument. I turned port off. Then I drug my instrument object to the arrange window on track 1. I deleted the other 3 tracks from the arrange window. This left me with a VERY close sounding patch to what I was originally after.
Now my question... how do I save the patch so that I can use it later in different projects?
Hope I've made this clear.
Thanks,
Tom

Not as settings, patches or channel strips - they are only saving the status of one instrument/channel at a time. There is no way in Logic to save one patch or setting that encompasses multiple instruments.
Imagine you create a layered sound with a hardware DX7, D50 and Jupiter 8 in your studio - how do you save that? You have to save the patches you used individually on each instrument, then to recreate it, load each of the three patches up and layer the synths again - and it's the same way in Logic. You can save the layer configuration (ie the environment routings), and you can save the individual patches, but you can't easily save the whole state of those three instruments in one "patch".
If the instruments support program changes, as mentioned, then you can program in the program numbers into your instruments in the environment layer to recall a particular patch on each, but this depends on the instruments you are using.
Basically, the way I would do it would be to save the patches used to a Logic setting or channel strip preset, then when I wanted to use that layer, I'd call up each channel strip in turn "My Layer Patch - Layer #1", "My Layer Patch - Layer #2", "My Layer Patch - Layer #3", then shift-click the record enable buttons to get the layer.
It's not as immediate as having a more flexible, multi-instrument settings system, but that's the best we have in Logic for now, I'm afraid...

Issue with playing ringtones in iTunes with Windows 7

For some reason I am having an issue playing ringtones I've created via my iTunes library. It keeps prompting me to authorize my computer so I can play the ringtone in iTunes but my computer is already authorized (I run Windows 7, iTunes 9.0.3 and only have the one computer authorized). I deauthorized the previous computer the library was on when I purchased the one I currently use and haven't had any other issues. Despite not being able to play the ringtones in iTunes, they transfer and play on my iPhone and all other purchases in iTunes are playing as well. I've tried the various troubleshooting tips listed on this site (i.e. changing user account settings, de-authorizing then re-authorizing etc) to no avail.

I have the exact same problem, on a MacBook 10.6.2, iTunes 9.0.3. I went to the genius bar, and reported the problem through the iTunes Store. After some boilerplate troubleshooting recommendations, I finally got a response that "ringtones will not play in iTunes, they will skip over them".
This is definitely not how it used to handle ringtones, it is unclear to me if they are saying this is a bug, or an intentional deprecation of iTunes' function. I would recommend staying away from iTunes created ringtones, self made ones still preview fine in iTunes.

How I can sync my iPad to iTunes with out deleting old data

Syncing of the itune stores

Hi, thanks for your reply. Unfortunately, my itunes library wasn't backed up before the reformatting. hence, I lost the itunes library. I downloaded a new itunes to the newly reformatted pc and did follow your suggestion to transfer purchases from the phone. However, when i made some imported content from cd into the itunes library, it couldn't be sync to the iphone. How do you transfer new content from itunes library to the iphone? I wasn't successful in moving the content from the playlist to the iphone anymore.

How to move iMovie '11 project to Macbook with iDVD

I have a movie I created in iMovie '11 on an iMac without DVD drive or iDVD. I have a Macbook with both. How can I burn the completed project onto a DVD on the other Mac? I have the appropriate Firewire cable. Thanks.

Copy the iMovie projec file, xxxxxx.iMovieProject to the other Mac and put it in the Movies folder. Open it with iMovie, use the Share ➙ Media Browser menu option to get it out of iMovie so iDVD and import it from it's Media/Movies pane.
Follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How to move a picture in another folder with drag & drop

I want to move a picture in another folder with drag&drop. I work´s any more. What I do wrong?

Hi all!
Thanks.
The problem was between the flatscreen and the chair...:-) I clicked always on the gray frame around and not in the image.
Now it works!

How to move mobilesync back up to Itunes so I can restore my Iphone?

Last night I needed to restore my iphone. It had too much "other" space and therefore would not backup to Icloud, so I went to the apple store and they told me I would have to back it up to itunes. Last night I backed my iphone up at 3:31pm. I then reset my iphone settings, and my iphone started to back up from the back up I had just created. It said it would take about 30-35 minutes to complete the restore. At 3:34pm the plug came undone during the restore, I plugged my iphone back in and it seemed to have overwritten my back up and created a new one at 3:35. My old one had disappeared from 3:31. I restored using the 3:35 back up, and it only brought back regular apps, no contacts, no photos, nothing but apps. At this point I called apple and was on the phone with them for an hour, and ultimately was able to restore using am incomplete icloud back up from january 2nd, that was unable to finish because of the lack of space. This only brought back my contacts, NO photos or anything else.
ANYWAY, today I did some googling, and learned about this spot on my computer called "Mobilesync." It was here where I found my back up at 3:31... I was excited when I found it, because I am pretty sure this is the back up I started with, but yesterday it had not appeared when I opened itunes and then went to preferences, it only had the 3:35 back up. DOES ANYONE know how to bring this back up which is in the mobile sync folder into itunes so I can restore it??
PLEASE help!!

Hello Rob,
Welcome to Apple Support Communities.
One of the articles linked below can help you resolve the issue with your iPhone 4S not being recognized by iTunes on your computer, use the first article if you have a PC and the second if you have a Mac.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
iOS: Device not recognized in iTunes for OS X - Apple Support
Ciao,
-Jason

How to move my music file to iTunes library

On June 20, 2008, I burned 149 songs by the same singer into a DVD and also a CD-R. Later, I somehow lost most of these songs from my iTunes music library. Today, however, I seem to have found them, or almost all of them. I found them in Music>iTunes>iTunes Music>Annette Hanshaw>Red Hot Jazz.
How can I move these songs from where I found them to my iTunes music library?

Niel wrote:
Drag them into the open iTunes window.
(34085)
2nd reply: As it turned out, I could do it. I just dragged the icon "Red Hot Jazz" out of the Hard Drive with my cursor into the Annette Hanshaw screen of my iTunes library. It was easy, although I did make one mistake that I'm going to have to correct. The mistake I made was that because it looked to me as if the transfer of files was being done in installments, I dragged the icon into the iTunes page many times. However, when I saw that it was going to transfer 800+ files, I realized that what I had done was simply to put several copies of each song in the iTunes library. Now I have to delete the extra copies, but I'm not complaining. Now I'm going to go after all of those song files that are scattered throughout my hard drive, and consolidate them into my iTunes library. There will probably be many extra copies, but fixing that will be a simple matter. Tedious, but simple. Thanks for your help.

Trouble Creating ringtone in itunes with mac

ok so i have snowleopard 10.6 and the iphone 4 and i went through everything to create a new ringtone and it doesnt work. i created the aac version, changed the time, changed it to a .m4r. (i followed a tutorial on youtube and when i got all done it wont show up in the ringtone folder and i cant drag it in there. not sure what else to do. i have done it before but that was before snow leopard and the iphone 4. Any help would be great.
Thanks

I have this problem too, how did you manage to fix it. Looking forward to your suggestions Thanks in advance

How to move songs from ipod to itunes?

I had to reformat hard drive. My songs on are on my ipod. How do I move them into itunes?
Dell Dimension 4600 Windows XP

Read the post by Zevoneer in this thread:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4877749

How to move songs from ipod to itunes library?

i recently rebooted my laptop and saved my current itunes library to my hard drive. i installed itunes after the reboot bu cannot get my old library back into itunes. is there also a way of sending the songs from my ipod to itunes?

You can't sync or drag your non iTMS music back directly from an iPod to iTunes, the transfer of music is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. As iTunes 7 is just out some of these may not have caught up with it yet though I haven't experienced any problems with the Mac software I use.
YamiPod Mac and Windows Versions
iGadget Windows Only
iPodCopy Mac and Windows Versions
iPod Access Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
CopyPod Windows Only
There is a new function in iTunes 7 under File, "Transfer Purchases from iPod" which transfers iTMS purchases. A paragraph on it has been added to this article: How to use your iPod to move your music to a new computer
If your iPod is set to update automatically take care when connecting back to your computer and an empty iTunes. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No* (or "Cancel" if you are using iTunes 7). Pressing "Yes" (or Erase and Sync in iTunes 7) will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. In iTunes 7 Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. External drives are comparatively inexpensive these days and you can get loads of storage for quite a small outlay.

How to move newly created ringtones on itunes with extension mr4 to ringtones

Similar Messages

Maybe you are looking for