How to move Oracle 10g AS 10.1.3

We are currently using oracle application server 10.1.2.0.2. We want to upgrade to 10.1.3.
I am bit confuse, when I download oracle application 10g 10.1.3.. it contains cds for sao_solaris_101310g_disk1 and disk2.
There no metnion of OID stuff.
Do we upgrade application server (mid tier) and web cache server using these disks ?
Thanks in advance

Before you download software at OTN, Oracle asks you to read the documentation. If you would have done this, you would have noticed that 10.1.3 is a J2EE server only. IM, forms and reports, portal, discoverer etc. are not included.
So please stick to 10.1.2 and wait for the next full version.

Similar Messages

How to configure Oracle 10g RAC on windown sever 2003

hi all
plz tell me
how to configure Oracle 10g RAC on windown sever 2003 can any body help me , give be any link
plz it is very necessary for me
Regards

Hello,
There are a good doc written by Philip Newlan at www.jobcestbon.com/oracle/RacOnWindows.pdf
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com

How to configure Oracle 10g Advanced Security to use SSL concurrently with

How to configure Oracle 10g Advanced Security to use SSL concurrently with database User names and passwords
In Oracle Advanced Security Documentation it is mentioned that i can use SSL concurrently with DB user names and passwords. But when i configure the client certificate on the client my DB connection is getting authenticated using the certificate, which out passing user id or password.
We want to connect to Oracle DB over SSL channel so that the data packets are not in clear text. Also we want the user to make a connection using user id and password.
Basically we want SSL with out authentication.
Need your expert advice

Read the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

How to install Oracle 10g release 2 on rhel4 release 2

I want to know How to install Oracle 10g release 2 on rhel4 release 2 from scratch from the partitioning of the disk in rhel 4 till the post installation .
System Configuration
x86 32 bit
Pentium(R) 4 CPU 3 ghz
RAM 1 GB 2.99Ghz
Oracle 10g release 2
rhel 4 release 2
Please reply me soon.
With Regards
Suvin Prathab
www.sceneworks.co.cc

Dear Suvin Prathab!
Please have a look at this:
[http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html]
Yours sincerely
Florian W.

How to install Oracle 10g on to Red Hat Linux 5 Server

I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
Thanks

Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.

How to Install Oracle 10g in SLES 10 32 bit

Hello Guys,
I was intalling oracle 10g in SUSE LInux Enterprise Server 10, but i always have an error..
Is there someone who can have and give a manual on how to install oracle 10g in SLES10? ANd some linux shell scripting
manual..?

Hi,
have a look at:
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php
you will find there your SLES and Oracle specific installation guide. With korn shell script you will be able to install Oracle within 60 minutes.
Good luck!
Cheers,
David
OCP 9i / 10g / 11g

How to download Oracle 10g Dev.Suite Patch

Hi,
I need to download How to download: Oracle 10g Dev.Suite Patch for WindowsXP SP3 32-bit for Developer Suite 10g.
Direct link to the download would be appreciated.
With regards,
MOHAMMED AJAZ.

Hi Sarah
I don't have access to metalink. i was trying to register but it's asking system identifier, which is i don't have. It's looks like for commercial use.
1. Can i register metalink for personal use? (this software i am using for practice.
thanks.
WITH REGARDS,
MOHAMMED AJAZ.

How to Uninstall Oracle 10G release 1

I'm a newbie in Oracle DB.
I've been assigned to a new task to assist DBA teams to migration SQL server to Oracle server. I got a new PC which pre-installed 2 Oracles version (9i & 10G), the 9i is OK but the 10G DID NOT work properly and I'd liked to replace 10G release 1 with 10G release 2 (for testing purpose).
I did followed the instruction how to remove the 10G release 1 using the OUI, but the process ran forever ... ( see screenshot --> http://img137.imageshack.us/img137/5555/oui10g1qb8.jpg )
I'm also know that I can delete Oracle thru Regedit, but in some Reg. keys do not show the Oracle version (I want to keep the Oracle 9i).
Could someone please enlight me how to uninstall Oracle 10G ?
PC's info:
OS : Windows XP Prof.
1GB RAM
50GB free space
All the Oracle services have been disable before Uninstall.
Thanks Advance.
DTH.

Thanks Marcio ...
I'm current process the step by step to remove 10G release 1, if I've problem then I'll let you know
Thanks again.
DTH.

How to access Oracle 10g with COBOL

Hi there,
I didn't find anywhere better to post this, so I'm sorry if this is the wrong place.
I'm having major problems trying to find out how to access an Oracle 10g database with COBOL because I have no directions. I've never programmed anything that access a database before, and my first time must be in COBOL (wich is a language I started learning yesterday)
My teacher (who is not a nice person) gave us no directions at all, and when we ask her for it she is rude
"Do you know something called library? Or maybe, Google?"
So I am here, desparate, asking for anyone's help, for any diirections.. like
-How to access?
-Wich COBOL compiler to use? (free)
-Do I access the database with commands in COBOL? wich commands?
-Any tutorial around the web about this?
I have to deliver the full project in a month.. lol
Oh well...
thanks in advance!
Oscar

I do understand if she want us to be resourceful, but yes, she was tottaly irresponsible with us... but what is done is done.
Thanks alot for the information APC
I gave a quick look on the documentation you gave me and it is perfect, I now know how to connect to the database and somewaht use the commands.
But I looked for 2 more things and didn't find it, I'm sorry if I missed there
1) Do I need to instal anything? Something like a Pro*COBOL installer? I'm using Fujitso COBOL compiler, do I need to use other?
2) I looked at the commands on how to connect to the database but I don't understand something (again, sorry if I missed something)
LOGON.
MOVE "SCOTT" TO USERNAME-ARR.
MOVE 5 TO USERNAME-LEN.
MOVE "TIGER" TO PASSWD-ARR.
MOVE 5 TO PASSWD-LEN.
EXEC SQL
CONNECT :USERNAME IDENTIFIED BY :PASSWD
END-EXEC.
DISPLAY " ".
DISPLAY "CONNECTED TO ORACLE AS USER: ", USERNAME-ARR.
How does the CONNECT command know where to connect? I mean.. where do I put the adress of my Oracle Database?
That's all I could think about with this quick look, when I start implementing I will read the guide with all my attention.
Thanks again for the help
Oscar

How to configure oracle 10g with clients

Hello sir i am a database user.
I want to install an oracle 10g (Client server architecture)
As i have a licenced Oracle 10g CD Pack.
Pls help me how to install Oracle & how to configure its clients.
As i have a server(running server 2003 ) in it and corresponding clients.
Thanks
Edited by: user10439074 on Oct 30, 2008 4:03 AM

Read the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

How to setup Oracle 10g grid on a node other than SERVER

Hi,
We are in a process of moving the database residing on Windows servers to IBM AIX5L servers. For this purpose I came up with an idea of installing database on AIX and operate it remotely on Windows platform using 10g Grid Control and 10g Client. For this to happen perfectly, I am in middle of implementing same concept on Windows platfrom. I have made a test database on a Windows based server and I am trying to connect it with another Window based node. I know hwo to connect it using a client software but I am more interested to do it on Grid Control.
At this stage, I have created database on server and have also configured Oracle Management Agent along with Oracle 10g Grid Control. I read oracle documentation that it is necessary to install Oracle Management Agent on server machine in order to let other nodes get connected with the server.
I would extremely appreciate anyone who could help me in setting up 10g grid control on another node. Please note I wish to operate the database using grid control remotely. For know you can consider both computers on same network, I will go on VPN once I am able to do it on local network.
Looking forward for your reply
Shez

Hi Xaheer,
Thanks for looking into this matter. I had agent and grid running on the server and I have almost installed 10g Grid control 10.2.0.2. The place where I am stuck now is the OMS Configuration script that run after the installation in Configuration Assistant window. It just stuck here for some minutes and then displays the error. Let me paste here the lines in that appears in the detail panel of installation wizard.
Output generated from configuration assistant "OMS Configuration"
Command = oracle.sysman.emcp.oms.OmsPlugIn -configureOms
Operation Stopping OPMN Processes is in progress.
Operation EM Deploying is in progress.
Operation Creating OMS Respository is in progress.
Configuration assistant "OMS Configuration" failed
The "d:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
According to the oracle installation guide, I had to deconfigure the database before running the setup. I did it using this command,
emca -deconfig dbcontrol db -repos drop
AS far as i think, I am getting this error becouse of sysman schema which was droped during the installation and was recreated( as I read in the oracle installation guide ) is not found by the script. So in order to b ring back sysman schema, I recreated the repository using following commands.
emca -deconfig dbcontrol db -repos drop
emca -config dbcontrol db -repos create
Now, the database on server is not starting up. I can just see RED downword error, u know what i mean right ? Everyting is down, Database instance, Listener and Agent Connection to Instance, and on the top pf page I can see " Enterprise Manager is not able to connect to the database instance. The state of the components are listed below."
When I try to startup the database using the grid control it gives me this error.
Couldnot contact the agent. Verify that the url for the agent is null.
I am stuck in here. If you know how to fix this agent , i would really appreciate that.
Thanks

How to Install Oracle 10g in Windows 7 Home premium 64bit operating system

Hi,
I am using Windows 7 Home premium 64bit operating system. While i was installing oracle 10g i got error and not able to install. How to install the Oracle 10g databse on this operating system. Is there any patch to install this or i have to use other version of oracle with window 7 operating system?
Thanks in advance
Mayank Adhikari

The argument would be who wants to install Oracle database on Windows 7. I think most probably by the developers who wants to "Try" something prior deal with a production database, right?
For a developer, installing database using the hack is more than NOT having a local database running from the local system. I installed all the products mentioned with windows7bugs post and used the following tools to successfully connect and retrive data from the database instances.
Toad 9.7.x.x
SQL Developer
SQL/Plus
Developer 6i (Another hack, please check this link http://windows7bugs.wordpress.com/2010/03/01/installing-oracle-developer-forms-reports-6i-on-windows-7-64bit/).
I think the discussion about whether all the features of client/server are still available with such a hacked installation is meaningless as far the information requested was strictly for Windows 7, not for a Server OS.
regards,

How to install oracle 10g on linux 9.0

am a student in nigeria and my name is tosin, studing oracle 10g on linux 9.0 with oracle partners NIIT. how do i install 9i and 10g on a linux 9.0.

Hello Tosin,
how do i install 9i and 10g on a linux 9.0. Do you mean Red Hat Linux 9 of on Linux AS? www.redhat.com
Anyways
http://www.puschitz.com/InstallingOracle9i.html
Hope this will help you
Cheers
Ravi
http://ravidba-oracle.blogspot.com/

How To Install oracle 10g

Hello,
I'm new to Oracle. I want to install oracle 10g (10.2.4.0 ) in windows server 2008. I want to know how should it install when we have set domain control. previously i have installed it and after that i add domain. But this time i'm going to install it after add the domain control.
i tried this 1s. it's giving an error
ORA-12560: TNS:protocol adapter error
Thanks
wbr

831585 wrote:
Hello,
I'm new to Oracle. I want to install oracle 10g (10.2.4.0 ) in windows server 2008. I want to know how should it install when we have set domain control. previously i have installed it and after that i add domain. But this time i'm going to install it after add the domain control.
i tried this 1s. it's giving an error
ORA-12560: TNS:protocol adapter error
Thanks
wbrDo you get this error when running installation?
If you get it after installation, then refer to the following blog article:
http://arjudba.blogspot.com/2008/08/ora-12560-tnsprotocol-adapter-error-on.html
Kamran Agayev A.
Oracle ACE
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/

HOW TO Install Oracle 10g on Linux on POWER

Hi Linuxers,
SAP has released the Oracle 10g Database Software for Linux running IBM's <a href="http://www.ibm.com/systems/linux/power/">POWER(TM)</a> platform in the first half of 2006. The release has come with a few headaches. SAP's Development Support receives so many of the same questions that I thought a little how to would be in order. In my first <a href="/people/patrick.hartman/blog/2006/10/17/how-do-i-install-oracle-102-on-ibm-linux-on-power">Blog</a> entry on the SAP Developer's Network, I have taken SAP Note <a href="https://service.sap.com/sap/support/notes/945315">945315</a>, <i>SAP installation with Oracle 10.2 under Linux on POWER</i>, and tried to thoroughly explain each and every point. If you plan to run, or are running, SAP on Oracle and plan to install on the IBM System p line of servers, this <a href="/people/patrick.hartman/blog/2006/10/17/how-do-i-install-oracle-102-on-ibm-linux-on-power">Blog</a> entry should help you.
Regards,
Trick

Hi,
I think you can forget it. Oracle 10g R2 was the last version supported on Linux PowerPC.
Cheers,
David
OCP 9i
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

How to move Oracle 10g AS 10.1.3

Similar Messages

Maybe you are looking for