How to move Organizational unit in PPOMA_BBP

Hello,
I would like to know how i can move Org unit in PPOMA_BBP
Regards,
Lina

Hi. It might be a bit tricky, but if you go to transaction PP01, select org unit and stick the org unit number in, then highlight "Relationships" and press change.
There is a field called "Priority" at the bottom.
When you move up and down in rank it is this field that gets changed.
If you can put in a prioity higher than the place you want it to be in the org structure, it will move.
I would try this in a test system first to try and get a feel for it.
Regards,
Dave.

Similar Messages

How to Transport Organizational unit created in transcation ppoma_crm

Hi all,
I have created, the organizational unit in transaction PPOMA_CRM,
Now what i want to know, how to transport these organizational units to Quality system. Because there is no transport option in that transcation.
kindly advice
regards
Naveen kumar

Hello Anand,
What you said is absolutly correct. I realized that a bit later, those org, structures and Business Partners need to be created in all environment and started doing it.
could you please clarify one more thing, i have created organization determination rules for sales and service organization determination.
Since i dont have ABAP knowledge i saved those rules under $tmp package. Now those rules cant be transported.
Is there any other way to reassign the package and do the transports.
kindly help..
regards
Naveen kumar

How to link organizational unit to org. Object type ?

Hello,
i want to link an organizational unit to the object type T024L, Does anyone know how i can do this ?
Thanks a lot

Hi,
You need to create assignment between Org object type and org unit. Use txn PFOM - Create Assignments for the same.
You can then try the std rule 30100012 also.
Hope this helps.
Regds,
Akshay Bhagwat
PS: Some points would be nice if it helps

How to check Organizational Unit

Hi experts,
How many ways are there to check the organizational unit of an User? (i need Tcodes or tables to check)
Thanks in advance

tables
V_T527X thru SM30
PO10 tcode expert mode
ppoc_old to create tcode
PPom_old change tcode
PPOs_old display tcode   simple maintianence
Ppoce create
Ppome change
Ppose display       organisational planning and staffing
Ppsc create
Ppsm change
Ppss display            general structures
PpmE change
PPMS Display
                                Matrix Structure
Edited by: Sikindar on Oct 24, 2008 5:11 PM

How to link Organization Units and Entities in Oracle Designer 9i 9.0.2.8 ?

Hi,
I am working with Oracle Designer in a project where we need to asses the Business Process Model of the customer, mapping it in Oracle Designer.
The Customer wants to see the relationship between Business Entity and Organization Units and Processes.
We are following this approach:
- define Entity
- define Organization Unit
- draw process models with Oracle Designer Process Modeler, defining the single process steps and indicating the Organization Unit who performs that activity;
- draw a Data Flow Diagram for each Entity with Oracle Designer Data Flow Diagrammer, including the business function we have defined as process steps within the Process Modeler.
Process Modeler allows us to link process steps to Organization Units, while Data Flow Diagrammer links Entity to business functions ( which are equal to our process steps). So we expect that for the "transitive properties" Organization Units should be linked automatically to Entity.
At the end, using Oracle Designer Matrix Diagrammer we only see the relationship between Business Functions and Entity and not the one between Organization Unit and Entity .
In fact, if we open Object Repository Navigator and check the property "Business Unit Entity Usage" of the Business Unit, there is no evidence of the entity related to the business function performed by the Organization/Business Unit.
Could someone helps us to understand how to use correctly the Oracle Designer Tools ?
We look forward to hearing from you.
Regards
Flavia Ercoli & Rodrigo Silveira

I would recommend the 10g version anyday over the previous versions. If you use any of the other supporting apps (forms, reports, portal....) your already at a much better release :)
Is there a reason you would want to use the prior version?

How to Create Organization unit with customised code?

Hi all,
My business requirement need to create a Organization unit with a customised report.
That customised report need to be developed in which i will be incorporating the code to create a new orgganization unit in sap
and also to assign it in the organization structure.
Please suggest me the Function Module to create it...or any sort of Standard report which is already doing that
Thanks and Regards
Sonal Jain.

If I understand you correctly, you want to create a PROGRAM to create an Organization Unit (IT1000) and it's relation to it's parent Org.Unit (IT1001 with relation A_002).
Check out program RHCOPY00, and create a Z version adapted to your needs.

How to get Organizational Unit of a Master Agreement?

HI,
I am trying to retrieve value of Organization Unit of a Master Agreement but I am getting some code: name.
ownerObj=doc.getDocumentOwnerUserReference();
ownerHome=IBeanHomeLocator.lookup(session,ownerObj);
ownerBean=ownerHome.find(ownerObj);
throw doc.createApplicationException("VENDOR_VISIBLE", "Supplier name is "+
ownerBean.getOrganization());
Please suggest.
Thanks,
Saloni

Hi Solani,
You were getting the error beacuse we don't have any field like org unit in the Contract Document and the method you used is not there in the API's.If you want to access the Master Agreement Org unit in Contract document then you have to get the MA bean and then you can fetch Org unit in your contract document.
Code as follows:-
masterBean = doc.getParentIBean();// to get the MA bean
orgunit = masterBean.getOrganizationalUnitRef(); //this wil give the orunit of the MA
businessUnitHome=IBeanHomeLocator.lookup(session,orgunit);
businessUnitBean=businessUnitHome.find(orgunit);
Hope this will work for you.
Thanks,
Ankur Goyal
Edited by: ankur_goyal03 on Oct 15, 2011 8:23 AM

How to Locate organizational unit ?

hi all!
I am trying to assign my ZPROFILE to my organizational unit.
now the problem is i do not know that is my org unit.is there a way by which i can figure it out.
any help wud be greatly appreciated.
thanks
sachin

Hi Sachin,
You have the partner no. with you right.
Goto the table BUT000 and enter the partner number to get the partner guid.
Reward points if it helps.

How to change organizational unit .

Hi Experts,
I have a rule in which some responsibilities are defined. Could anyone please tell me how to change the values in the Rule like I want to change the persons listed there to someone else.
Also if there is any way to change the organizational structure and what will be the steps.
Thanks
Papiya

Hi
To change rule go to PFAC and make copy of this rule.Later go to edit mode and change it (eg Function module that is used there or values in container tab).
To change rule result you can also in workflow schema change Binding between rule and task (you will find there import parameters that influence rule result).
to change organizational structure (eg in SAP CRM) you have to go to tcode ppoma_crm and make changes.
later launch special report to attach those changes to transport.
Regards

Q: SRM/EBP Organizational units without business partner

Hi,
Good day!
I have a problem on generating business partner when creating an organizational unit via PPOMA_BBP.
Please see below setting of HRLAX of table T77S0.
HRALX     HRAC     X     Activate HR Integration
HRALX     MERID     X     Enter Integration Error in IDOC
HRALX     MSGRE     0     Recipient of Error Message When Creating BP
HRALX     OADBP          Business Partner of Standard Address
HRALX     OADRE          Address Necessary for Business Partner?
HRALX     OBPON     ON     Integration O-BP Activated
HRALX     OBWIG     X     Ignore Business Partner Warnings
HRALX     ONUMB     2     Business Partner Number Assignment (Org. Unit)
HRALX     OPROL     BUP004     Role of organizational unit in business partner
HRALX     OSUBG     01     Business Partner Subgroup (Organizational Unit)
HRALX     PALEO          Log: Organizational Units in ALE
HRALX     PALEP          Log: Employees in ALE
HRALX     PBPHR     CREATE     Employees Are Replicated from HR System
HRALX     PBPON     ON     Integration Employee/BP Activated
HRALX     PCATS          Integration P-BP for CATS Activated
HRALX     PLEVE     3     Log: Detail Level of Error Messages (1 - 5)
HRALX     PNUMB     1     Business Partner Number Assignment (Employee)
HRALX     PPROL     BUP003     Role of employee for business partner
HRALX     PQUAL          Import Qualifications
HRALX     PRTON          Log Active
HRALX     PSYNO          Log: Organizational Units in Dialog
HRALX     PSYNP          Log: Employees in Dialog
HRALX     USRAC     X     Create relationship to user
This happens when i changed the HRLAX ONUMB to 2.
Thanks in advance for your help.
Regards,
Glenn

Hi Glen
What is the reason you are using ONUMB = 2. Why are you not using ONUMBE = 1
Note on ONUMB and PNUMB u2013
1. For switch value 1, the internal interval is used.
2. For switch values 2 and 3, the interval is defined by switches HRALX/OSUBG and HRALX/PSUNG.
3. Additionally for switch values 2 and 3, a grouping must be created (transaction BUC2) for these intervals. So that the system can connect the grouping and number range interval, the name of the grouping must be identical to the name of the corresponding number range interval (the name of the grouping is in the first column of the table).
4. If type 3 is chosen (switch HRALX/ PNUMB=3) for the number assignment of business partners of the employee role, switch HRALX/PSUBG need to be created manually in table T77S0.
Refer to other OSS notes mentioned in the document
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50350f29-1db1-2d10-0194-d6a3bf01a5aa?quicklink=index&overridelayout=true
Regards
Virender Singh

Organization Unit Replication..

Hi All,
 we are doing upgrade srm3.0 to srm5.0.
i am facing a problem in Organization unit in srm5.0.
my question is how to replicate organization unit between two SRM systems, say for example. SRM3.0 instance is 'A' and SRM5.0 instance is 'B'.
is there any way or t.code avilable to replicate all organization unit from 'A' system to 'B' system.
generally when i create new organization in any system, transport request will not ask so i cant do by transport request, then how can we replicate organization unit between two system.
please this is very urgent one.
thanks,
john.

FYI...you can get this document the service market place as described in OSS note 447651.
<a href="https://service.sap.com/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=447651&_NLANG=E">https://service.sap.com/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=447651&_NLANG=E</a>
This will avoid a bunch of email requests and makes the forum more useful for future users searching for help.
Regards-
b

SAP HR OM copy organization unit

Hi Gurus,
How to copy organization unit and what is the Transation code for that?
Thank u for yr response.

hi..
RE_RHCOPL00

DirectorySearcher for an Organizational unit

&(objectClass=user)(memberOf=cn=MyGroup,ou=West,dc=MyDomain,dc=com) work great for a group.What syntax do I use for an Organizational unit?
Certified Geek

Hello Arne,
>>What syntax do I use for an Organizational unit?
If you mean you want to do a query against a OU, you could check this link:
https://technet.microsoft.com/en-us/library/cc755655(v=ws.10).aspx#BKMK_4
Search for “dsquery ou”, it shows how to
find organizational units in the directory that match the specified search criteria.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Organizational unit transfers ,how to deal with the person in it ?

Hi,All,I need your help!
if an organizational unit has been transfered to another upper organizational unit ,and there are already persons assigned to different positions of it,so how to deal with this problem?are those person's IT 0000,0001should be changed too?and how to maintain this kind of change?is a personnel action necessary?or there is some other more efficient way for it?

Hi
In IT0001 You have a Position which is linked to a Org unit. If you want to change the org units reporting relationship then you have to change it in OM by creating a new relationship with the upper org unit.
All the person are assigned to position so nothing needs to be done in PA.
Reward points if useful.
Regards

How do I activate the object history for an organizational unit ?

Dear experts,
we're using organizational units, positions, persons and users of the
organizational management (Transactions PPOCE and PPOME) for
the determination of (possible) agents in our Workflows.
The objects seem to have an object history, at least you find such an
option in the "find by" window on the left hand side of the maintenance
transactions, but in our system there are no entries and I can't figure
out how to activate history entries to be written.
Do you ?
Thanks in advance
Andreas

Hi,
In OM all relation have a validity. I think you mean this with object history.
If you double click an organizational unit for instance and then open the detail tab (if it wasn't open already)
there you'll see Valid On with todays date this is the date which is used for determining the organizational structure, also you'll see No Periods with a green square to the left of the text.
Just above the text Valid On, you'll see a button, when you click on the display periods button you can change the date to see what the relation of the object was at that time.
You can also search the HR forum for more on organizational management.
Kind regards, Rob Dielemans

How to move Organizational unit in PPOMA_BBP

Similar Messages

Maybe you are looking for