How to move pages up/down

Is there a key combination that will allow me to move up or down a page at a time?

Olemacr wrote:
Thanks  for the reply but nothing happens on my iMac using those keys.
There are global shortcuts, which should work in all apps; there are Cocoa text engine shortcuts, which should work in all apps which use the Cocoa text engine; and there are app shortcuts. How a specific app responds to a command such as Page Up is not necessarily under the OS control.
The shortcuts indicated by Don Archibald are correct. How any specific app responds is another matter. So tell us exactly what app (and version) you are using and maybe we'll be able to help.
I did find that on my MBP fn and up or down arrows did move a page at a time
For some keys, and for obvious reasons, on the MBP fn is similar to control.

Similar Messages

  • How to move page in a section

    Hi,
    I use Pages '09 on Lion.
    I have a section in my document (seen by the yellow line around it) with several pages.
    I just can't find how to move, or better rearrange the page order in a section. Let's say I just want page 8 in my document move up and be page 5.
    How can I do this?
    Thanks.
    Andre

    You are using the Word processor document  in Pages and you can't move the pages but you can move sections.Normally in a WP document you move the content and not  the pages so
    Select the content you want to move
    Either cut it out  ( Cmd + X) and paste it where you want it. The text after where you insert the insertion point will move down when you paste the text. OR
    Place the  the cursor over the selection and press the mouse button and hold it down a while and start dragging. The selection will now move with the cursors. Move it to where you want it. You should be able to see a small black vertical line whch you place where the text shall start.

  • How to move wax line down?

    Is it possble to move wax line down from an text adornment like it does "Paragraph Rules"->"Keep in frame"?

    Olemacr wrote:
    Thanks  for the reply but nothing happens on my iMac using those keys.
    There are global shortcuts, which should work in all apps; there are Cocoa text engine shortcuts, which should work in all apps which use the Cocoa text engine; and there are app shortcuts. How a specific app responds to a command such as Page Up is not necessarily under the OS control.
    The shortcuts indicated by Don Archibald are correct. How any specific app responds is another matter. So tell us exactly what app (and version) you are using and maybe we'll be able to help.
    I did find that on my MBP fn and up or down arrows did move a page at a time
    For some keys, and for obvious reasons, on the MBP fn is similar to control.

  • How to move page order in a document created in Pages 5.1

    How do you move page order in Pages I used to be able to click and drag the thumbnails but can't in latest version (5.1)

    You should ask in the Reader forum. But my guess is that Reader there is nothing you can do. Acrobat allows you to move pages around, but not Reader.

  • Pages: How to move pages from one location to another?

    How to move a page from once place to the other in a document? The previous version allowed to do it

    Apple has removed almost 100 features from Pages 5. This is just one of them.
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
    Peter

  • How to move pages between documents WITHOUT elements shifting

    Hi everyone! My team members and I are so frustrated over what I think should be a really simple issue: copying/moving/dragging pages between documents and NOTHING CHANGING.
    Whenever we move pages between documents (which we have to do on a monthly basis - moving content into client branded files), at least ONE thing will shift and it usually has to do with overset text and/or text wrap. We have googled our brains out. We've tried everything on this list How-To: 10 Techniques for Copying Pages Between InDesign Documents | CreativePro.com and in the various Lynda tutorials we've looked at. We have combined our powers and still can not solve this problem so now I come to you, hoping that you can please please please help us figure out this issue before one of us throws a computer out the window.
    We have this one document. And this is what one of the problem pages looks like. Everything is on one layer. (look at the section marked 5)
    Then I move the pages (copy/paste the content; drag and drop the pages; etc.) into the destination document so we can apply branding.
    AND THIS HAPPENS.
    WHY does this text suddenly become overset?
    The preferences of both documents are IDENTICAL. In fact, Document B was originally created from Document A.
    AND FUN FYI: I took Document A and Saved As a new name. Opened it the new name. And tried moving the pages into the newly named document -- and the SAME EXACT THING HAPPENED.
    I am going to bash my head into a wall. Can someone please shed some light on this? Have you seen this before? How do we fix it??

    aschwartau wrote:
    Doesn't saving as IDML lose some of the properties if you use any shadow or other effects?
    That's not something that I have ever heard, but since I haven't heard everything, I suppose it's possible. What you may be thinking of is that some people use idml to migrate a file to a lower version, and if that lower version lacks a feature of the version that created the file, you will either lose or modify the way that that feature worked in the original. I don't think that even in that scenario that a feature that was present in both versions would go away just because it took a trip through idml to get to an earlier version. And if idml botched shadow or effects, nobody would use it, and I don't think Adobe would have it.
    aschwartau wrote:
    If we had just done a final Save As on the Document A before giving it to the team member who's going to be copying the content into Document B, does that not count as doing a Save As? You mean the minute it's freshly opened try doing another Save As? (P.S. Edit: Just tried this. Didn't change what happened. )
    The thing that Save-As does is remove little bits of data associated with undos that a normal Save retains. Sometimes this data can lead to problems, so any time you do it, it will help, but if you do it at stage 37 and you hand off at stage 38, you will have cleared out most all of anything that may have built up over time. I don't want to give the impression that it is required, but it certainly doesn't hurt, and is probably a good idea to Save-As periodically.

  • How to specify Page Up/Down keys in keyboard short cut?

    I'd like to assign Alt-Page Up and Alt-Page Down keys as a keyboard shortcut. How do I specify these and other special keys?

    thanks for the reference. excerpt:
    You represent other special keys with keysyms. A keysym is a keyword that denotes a special key on the
    keyboard. Keysyms are always preceded by a forward slash (/). Valid keysyms are Up, Down, Left, Right, Home,
    End, PgUp, PgDn, Return, Tab, BkSp, Space, Delete, Insert, F1 through F16, and Escape. For instance, to include
    the Tab key as part of a key sequence, you use /Tab.

  • How to move page from One workspace to another workspace

    I have a production web site in one workspace and a development web site in another workspace. I want to move a page(not all) from production workspace to development workspace. How to achieve it?
    Thanks for your help.

    Hi Scott,
    I have the same issue, and I can answer your questions.
    1. I'm Bill and my handle is wcmanes
    2. I have APEX 3.0 in both dev and prod database.
    3. Their are two different databases with a workspace in each.
    Some additional info:
    The workspace names are the same in each database
    The application names and ID are the same
    The production app was created as a full export/import of dev app
    Not I want to move one modified page from dev to prod. I used the page export from the dev page. When I try to import the file in the production workspace, I get the error message:
    Logged Into Workspace: Q2DW_RPT
    Export File Workspace ID: 938732400343783
    Export File Application: 101
    Export File Page: 1003
    Export File Version: 2007.01.08
    Page Origin: This page was exported from a different application or from an application in different workspace. Page cannot be installed in this application.
    Thanks,
    Bill

  • HT1535 I would like to know how to move up or down a song in a playlist in Itunes

    Hello all,
    I created a new playlist but do not like the way my songs were list. I want to organize them manually in a order that I want them to be played.
    I want to know how I can change to move songs and save it so when I sync with my ipod it will remain the way I ordered them.
    Thanks for your reply

    Select a playlist. The View > View Options and choose Manual Sort from the sort by fields. Then you should be able to drag songs to whatever ored you want and sync through to the ipod

  • How to populate page drop-down list in Struts from action?

    I have following mockup JSP:
    <td colspan="2" height="28"> <font size="2">
            <html:select property="sj">
               <html:option value="allj">aaa,1,str1</html:option>
             </html:select>
                        </font>
                      </td>
    ...Struts action will prepare results as String[] array e.g.:
    aaa,1,str1
    aaa,2,str2
    aaa1,1,str3
    aaa1,b,str4
    and I have to show this in the page as a drop-down list of values that are represented in this String[] array returned from Struts action.
    Should action return result array in original ActionForm submitted to the action by this page or should it just put the array into request or session? I need an example if possible
    Many thanks,

    Hi,
    In ur Action Class create aa ArrayList of LabelValueBean Object (use import org.apache.struts.util.LabelValueBean; )
    Eg:
    ArrayList myList  = new ArrayList();
    for( int i=0; i<10 ; i++ )
       myList.add( new LabelValueBean(  "Label of  "+ i , " value of " +i  ) );
    }put myList either in request or session
    eg
    session.setAttribute(  "DisplayList", myList  );****************************************************************
    in JSP use JSTL Tags for JSP
    eg
    <html-el:select property="listToDisplay"  style="width=200" size="1">
    <html-el:option value="-1">--Select One--</html-el:option>
    <html-el:options collection="DisplayList" property="value" labelProperty="label" />
    </html-el:select>Here "DisplayList" will be ref'ed from session scope or request scope.
    Hope this can solve ur Doubt.
    Ganesh

  • HOw to move pages around in a book

    I've created a book but now I want to re-order some of the pages - I can't seem to do this with drag and drop or cut and paste. Any ideas?

    On the left side of the browser at the top of the iPhoto window you will see two symbols. The top one looks like a sheet of paper with the corner folded down, the bottom looks like multiple sheets/cards. If you click on the top symbol, you will view thumbnails of the pages in the book; the bottom gives you photos. At the bottom left of the window, there are two buttons above the word "view". Clicking on one button versus the other changes the window to view either one or two pages. This also affects whether or not the pages are locked together in the browser. When you are in page view, you can drag and drop pages in the browser to create the order you wish.
    I hope this helps.

  • How to move pages around in acrobat

    Hopefully someone can help me.
    How can I re-order my pages in acrobat 11 for mac

    Just open the Pages navigation panel and you can drag pages to reorder them.

  • How to move page item from one page to another page in a document?

    I used kMoveToSpreadCmdBoss for spreads but It's not working for pages.

    I used kCopyCmdBoss and kPasteCmdBoss command but it's not working because it needs only spread layer UIDRef not for page. 

  • How to move pages of the site into folders and subfolders in adobe muse?

    is it possible?

    Hi,
    Some useful threads are given below
    Change the folder structure in Adobe Muse?
    How can I structure my muse cc site with folders
    Exporting a Muse site - need folder structure for images

  • How many movies will an 8 gb iPod hold?

    How many movies could I down load on an 8gb ipod touch 4g?

    An 8GB iPod only has about 6.3 GB available to the user.  You could get about four-five movies on the iPod.  However, that depends upon the size/length of the movies.

Maybe you are looking for