How to move quality blocked stock to unrestricted
During Quality inspection I have put 2 nos of the items in blocked stock and done no further processing. Do i need to create notification and then transfer the stock to unrestricted.
Kindly guide with the T-code
Thanks
how r u sure that the blocked stock which is showing in mmbe is that stock which u have placed in blocked stock through the inspection lot .
i had also faced the same error some time back.
after analysis i found out that the stock which i was thinking was placed to blocked stock thru an inspection lot wasnot the amount showing in mmbe.
what u can do is proceed all the inspection lot in QM against the material code.
regards,
indranil
Similar Messages
-
Pointers Needed on Movement from Blocked Stock to Unrestricted Stock !
Hi Gurus,
I have a scenario wherein I need to take care of "Movement from Blocked Stock to Unrestricted Stock using Movement type 343 and in the next step need to do Material to Material transfer using movement type 309"
My Query is:
1. What does it mean when we say Movment from Blocked stock to Unrestricted stock ?
2. What does it mean when we say Material to Material transfer ?
Please help me with pointers on finding a BAPI to do the above stock movements or material to material transfer.
Many Thanks,
MadanHi,
Please help me with pointers on the mapping parameters for this BAPI.
Here are the details which I am using, but gettin error message -
T ID NUM MESSAGE
E /CWM/MM 001 Transfer the parallel entry quantity/entry unit of measure
I have filled below fields:
GOODSMVT_HEADER
PSTNG_DATE 11/25/2009
DOC_DATE 11/25/2009
PR_UNAME MyName
HEADER_TXT TEST
GM
04 (Transfer Posting)
GOODSMVT_ITEM
MATERIAL 100001374
PLANT 1AAE
STGE_LOC B100
BATCH 0111331309
MOVE_TYPE 343
ENTRY_QNT 10.000
ENTRY_UOM EA
ENTRY_UOM_ISO EA
MOVE_MAT 100001374
MOVE_PLANT 1AAE
MOVE_STLOC B100
MOVE_BATCH 0111331309
Need your help to resolve this.
Many Thanks,
Madan -
Bapi to move Quality inspection stock to unrestricted stock
Hi All,
I am developing a report where the material batches should be distributed to other storage locations within a plant (as we do it in MB1B with movement type 311).But if that material is in QI stock( inspection lots) then that should be forcibly moved to unrestricted stock.Is there any BAPI available to mimick QA11 and force the material from QI stock to unrestricted stock.
Thanks in advance,
PramodHi Peter,
The requirement is to mimick the transaction QA11.I am all ready using the BAPI_GOODSMVT_CREATE to post the goods from unrestricted stock.But,to move the stock under QI inspection I have to first move it to unrestricted stock and then post it.Is there any other BAPI available for mimicking the transaction QA11.
Thanks,
Pramod. -
How to use quality inspection stock
Hi,
Plz tell me How to use quality inspection stock.can i use quality inspection stock for any transaction directly.
Now i have 100 quality inspection stock is there.but i am not taking these stock to unrestricted use stock.i want use these stock to all transaction like 301,303,309.......
it is possible or nothi
Use t-code MB1B to transfer stock from quality inspection - unrestricted-use stock
Movement Type 321 Transfer posting stock in quality inspection - unrestricted-use stock
The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
Possible special stock indicators: E, K, O, Q
u2022 K Goods receipt for purchase order to consignment stock
u2022 O Goods receipt for purchase order to stock of material provided to vendor
u2022 E GR for purchase order or order to sales order stock
u2022 Q GR for purchase order or order to project stock.
regards
Vishal -
Report for material moved from blocked stock to unrestricted stock
Hi,
Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
Regards,
PratapIt would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria. -
Blocked stock to unrestricted stock in wm
Dear all,
i want to move the stock from blocked stock to unrestricted stock in WM.our issue is there is no stock availability of Blocked stock in IM.
Is there any manual transfer available in wm for the same. what could be possibilty for the above issue.i.e stocks available in wm not in IM.
Kindly guide me
Regards,
veluIn WM
Posting change from blk.to un rest.
1) LU01- MOV TYP 309,
2) LT05
Question?
A)have you already done the transfer posting in IM? otherwise where is the stock in IM and why it is available in WM?
b) If you have already done in IM try to find the mat. doc?In the mat.doc you see in the WM View posting change number,enter the posting change number in LT05 !
If not solved pls check LS 26,let me know the Stock status...
Regards,
eswarmanu...
Edited by: eswarmanu on Nov 18, 2008 6:40 AM -
Stock Status of meterial is set as 'blocked stock' and 'unrestricted"
Any Standard Report Stock Status of meterial is set as 'blocked stock' and 'unrestricted"?
Hi,
You can check the stock status using transaction mmbe......
Regards,
Noopur -
Blocked stock to Unrestricted Stock
Hi All,
How to Convert Blocked Stock(Movement type 651) To Unrestricted stock(Movement type 653)
Post Goods Receipt is done with Movement type 651 now i want to change its movement type to 653
Regards,
AmolThe TE keys assigned to this movement are GBB & PRD.
In this case i believe it would be GBB with modifier VAX.
I am not fully aware of the Indian acctg. procedures, so hence kindly work with your FI/Co personnel.
But from logistic point of view, this is the movement to be used.
Regards,
Vivek -
Adding Quality blocked stock in to warehouse stock
Hi All
I cannot find a way of adding Quality Restricted stock in to our warehouse in one movement.
Normally we use MB1A mvt 222 to add returned unused stock in to the warehouse with reference to a WBS. Then we use MB1B mvt 322 or 344 to quality restrict or block the stock.
I now have a need to return the stock in to the warehouse and quality restrict or block at the same time. I do not want to return the materials as unrestricted stock and then quality restrict/block them.
Any help would be greatly appreciated
Thanks in advance
DarrenYou can achieve this with creating "scope of planning" in OM0E or special procurement keys
[MRP multi plants|http://help.sap.com/saphelp_46c/helpdata/en/f4/7d2d4d44af11d182b40000e829fbfe/content.htm] -
Insp lot required while transfering qty from blocked stock to unrestricted
Hi, say when we recieve 10 qty of goods from vendor, 5 are ok and remaining are not ok, so inspection done and 5 qty putit in blocked stock. now with some minor rework by the vendor (vendor came to our premises and reworked) made it ok, accordingly we need to inspect the reworked parts. pls advise how to map this in sap qm? how insp lot generated, pls explain the process.
Activate inspection type - "08" in material master.
Now do MB1B - mov type 349 - Blocked to QI.
Here system will create insp. lot.
Do inspection of lot if okay then unrestricted.
Hope this helps.
Thanks!!! -
How to migrate GR block stock (103) and its PO from SAP to SAP system
Hello All,
We are migrating from one SAP system to another . Our approach is to only migrate open POs and upload stock with initial entry. This works for POs with 101 movement type. However POs with Goods in transit - which usuallly follow the 103-105 cycle are causing an issue.
How would I migrate GR blocked stock i.e. if a PO has had only 103 mvt against it.
Thanks in advance.Hi,
If the invoice is not entered / paid, then the old PO should not be processed for any subsequent process and you have to do all the subsequent process based on the new PO in the new system. You may block the old PO item to avoid any mistake.
If invoice is already entered and pending for payment, please check with your accounts department regarding the approach, since it will be critical from audit point of view. You may either cancel the invoice in the old system and create the same in the new; or continue with the payment in the old system and transfer the correct material valuation price from old system to new system and create free of cost PO for these items (only for already paid items) in the new system (since invoice is already paid).
If you need the GR blocked stock, you have to create the transaction data!!. You may use any of the data upload tool to achieve the same!
Regards,
AKPT -
Mtrl movement from blocked stock to vendor
my material is lying in bolck stock.
i want to send back that mtrl to vendor.
hw can i?hi,
return delivery for gr blocked stock is movement type 124.
the table below shows which reversal movement types you can use.
movement type return delivery substitute delivery
(GR) 101 122 123
GR 103 124 125
GR 105 122 123
PREREQUISITE :if you want to return delivered goods to vendor for some reason(due to poor quality or because they are damaged)you can use this function to return goods even if you have posted goods receipt.
when you enter return delivery you should reference the p.o. so the system will suggest:
check return qty does not exceed delivery qty.
Reward points if useful
Regards,
N.Ramesh -
RE: VELO Return blocked stock to unrestricted stock
Dear experts.
I have a situation where once again i would appreciate any help.
We are doing returns in VMS for an automotive company. All my code is working and my program creates a return, return delivery, goods reciept and credit memo in vms. My problem at this stage is when i try to move this vehicle from blocked stok to unrestricted stock (Action REUS) the Bapi returns with a message complaining about a notification class. However if i run transaction velo for the exact same vehicle and try to do action REUS the log tells me that the account requires an assignment to a CO object. I can however not just include this in config as our FI consultant says this would influence all movements into and out of this account. I need to code it into my program. And pass the profit centre to the bapi. I am using BAPI_VEHICLE_CHANGE_MULTIPLE but can not find any place to pass the profit centre.
ANY HELP?????
PLEASE.
Kind RegardsHi Griphen
I think that is a CO configuration problem, VMS donu2019t influence the determination profit center , ask: you are returning the vehicle at the same plant?
Best regards
Pablo Aguila -
How to remove GR blocked Stock
Dear experts,
We found there is some stock in GR.Blocked stock, which we can can not release into unrestricted now as we have no pending
103 documents,how to make the stock into unrestricted.please suggest me.
Thanks in advance.
Varun
Moderator message:
Locked. Reason: basic question.
Please search before asking.
Edited by: Csaba Szommer on Dec 23, 2011 6:48 AMHi,
Please refer the below links hope it may help you
http://help.sap.com/saphelp_46c/helpdata/en/a5/6334ef43a211d189410000e829fbbd/content.htm
diffrence between GR Blocked stock and Blocked stock
Did you check MMBE to see the stock...
whether its showing there...
If its showing there...
Remove the stock from GR blocked stock...either via referencing the material document through which you post it to GR blk stock or via referencing the PO...
and release it to stock or consumption...
and then check ....
You can do above from MIGO itself...
Regards,
Udaya. -
Stock in MD04 is also considering Blocked stock with Unrestricted Use
Hi PP Gurus,
In MD04, the stock which the system is showing also considers Blocked Stock for Planning means stock= Unrestricted Use Stock + Blocked Stock.
We Dont want blocked stcok to be considered.
We are using 01 availabilty check with PP checking rule.
In OPPJ, the check box for Stock-Include Safety Stock is only Checked.
Can anyone Please explain why the system is considering blocked stock for Planning???
Thanks in advance,
Regards,
Rakesh WadeHi,
Pls check in OPPQ - Available stock tab - Blocked stock would have been activated and hence the system is considering the Blocked stock also.
This indicator when activated causes blocked stock to be included in the MRP calculation.
The indicator you enable in OPPJ will come into effect only when you carry out an avilability check.
Regards,
Sheik
Maybe you are looking for
-
Hi, Can we assign attribute set to multiple business partners at a time, is it possible in Marketing. I got an interview question please tell me if you know the answer. Thank you in advance.sh Regards Kishor Kumar.
-
How do i add my macbook to devices in my iTunes account?
I have recently purchased a macbook air. I wish to add it to my iTunes account under devices. I cannot find anywhere that allows me to set this up. Suggestions would be appreciated.
-
Mail started new again... how do I get my old Mail back?
Mail asked for info like when it's first installed, now all my drafts and marked infos are gone. I want my old mail back! I found it in the Library... but how do I make it see it now? I erased the new, but when I opened, there was again Strange...
-
Integration of SMS with Cisco LMS 3.2
Hi, Need assistance to confirm if SMS alerts can be integration with LMS 3.2. If yes, could you please walk me though the process. Rgds.....Navinder
-
Hi, I have a requirement to open a word document in html and edit it and when he clicks a button on UI i have to take that document stream to the server and store it on the server. can anybody help me on this.