How To Move Recovery Partition in between System & Data Partition To Extend System Partition?

Hello, I have recently purchase an ASUS S400CA Ultra Notebook and the hard drive has 1)EFI Partition & 3) Recovery Partitions with one of the recovery partitions being in between C:/ System & D:/Data partition. I am wanting to delete the D:/Data
partition to extend and maximize the C:/ System partition, but I am not familiar with how to do so with this recovery partition in between them.
Is there a way that I can move or copy the recovery partition that is in between C:/ & D:/ to the other side of D:\, delete the old recovery partition location and D:/ partition, then extend C:/ without destroying the recovery partition or any links,
etc. for the recovery partitions???
I do not want to delete any recovery partitions, only my D:/data partition because my C:/system partition is too small and I don't want to have to manually balance
my data & programs between the 2 partitions!
I just need to find a way that will allow me to move or copy this recovery partition that is in between C:/ & D:/ to the other side(right) of D:\, so I can delete its old recovery
partition location and the D:/ partition, then extend C:/ without destroying the recovery partition and / or any links, etc. for the recovery partitions???
I tried to provide a picture / screen shot of Disk Management, but the site wouldn't allow it because it needed to verify my account that I've had here for a long time! Go
figure!

Hi,
To verify your account, please refer to
http://social.msdn.microsoft.com/Forums/en-US/5a35b6c8-7a1a-4dc9-9b28-be69c55afb96/verify-your-account-13?forum=reportabug
Meanwhile, please upload the screenshot.
Regards,
Kelvin Xu
TechNet Community Support

Similar Messages

How to calculate the hour difference between two dates?

hi all,
how to calculate the hour difference between two dates?
eg i trying this...
((TO_DATE(TO_CHAR(GRNi.reference_date_4,'hh24:mi'),'hh24:mi') -
TO_DATE(TO_CHAR(NVL(GRNi.reference_date_3,SYSDATE),'hh24:mi'),'hh24:mi'))*24)*60 Act_Hr
Reg.
AAK

Hi
To break the diff between 2 dates into days, hours, minutes, sec -- you can use the following:
select to_char( created, 'dd-mon-yyyy hh24:mi:ss' ),
trunc( sysdate-created ) "Dy",
trunc( mod( (sysdate-created)*24, 24 ) ) "Hr",
trunc( mod( (sysdate-created)*24*60, 60 ) ) "Mi",
trunc( mod( (sysdate-created)*24*60*60, 60 ) ) "Sec",
to_char( sysdate, 'dd-mon-yyyy hh24:mi:ss' ),
sysdate-created "Tdy",
(sysdate-created)*24 "Thr",
(sysdate-created)*24*60 "Tmi",
(sysdate-created)*24*60*60 "Tsec"
from all_users
where rownum < 50
HTH
RangaReddy

How to calculate the month difference between two date char. in Query?

Customers would like to see how many months passed between two date type of characteristics (e.g., the month difference between the current date and the scheduled delivery date in the record) and put the result into the column as KF.
We would have to grab the fiscal year/period kind of value and then do the subtraction, e.g., if the current date value is 2/28/2008 and the scheduled delivery date value in the record is 12/01/2007, the correct result should be 2 month difference between these two date values, but could someone here give us the technical light on how to make this happen in query design?
Thanks and we will give you reward points for the correct anwsers!

Hi Kevin,
The Badi is RSR_OLAP_BADI.
You can create an implementation using Transaction SE18.
The implementation is per cube and is defined in the filters.
In the Implementation you have the following methods :
1. Define : Here you will provide the Keyfigure you need as a virtual one.
2. Initilialize : Any Init Function you want to do.
3. Compute. This is called per datarecord and here you can cimpute your value.
Hope this helps.
Pralay Ahluwalia

How to calculate number of days between two date in Template design?

Hello guys
I have a situation where I have to create a template that returns data, and one of the thing of the existing report is that there is a column that is actually the number of days between start date and end date columns..
So in template, how would I be able to do the same? I have start date and end date columns on the template, now when I created another column using expression like end date - start date and preview the template, I am getting errors saying :
Caused by: oracle.xdo.parser.v2.XPathException: Cannot convert 03/31/2009 to number.
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:521)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
Please advice
Thanks

Hi
There is an extension function you can use, from the javadoc:
date_diff
public static long date_diff(java.lang.String format,
java.lang.String fromDate,
java.lang.String toDate,
java.lang.String locStr,
java.lang.String tzID)
Method to get the difference between two dates in the given locale. The dates need to be in "yyyy-MM-dd" format. This function supports only Gregorian calendar.
Parameters:
format - the format to which the difference is required; allowed formats are y (for Year), m(for month), w(for week), d(for day), h(for hour), mi(for minute), s(for seconds) and ms(for milliseconds)
fromDate - the first date
toDate - the second date
locStr - locale string -> lang-Territory
tzID - timezone ID ->http://java.sun.com/j2se/1.4.2/docs/api/java/util/TimeZone.html
Returns:
the difference in dates in the desired format
For example
<?xdoxslt:date_diff(‘d’,’2009-09-14’, ‘2009-09-20’,’en-US’,1)?>
give a result of 6
You can substitute in columns for the dates, just remember the date format required.
Regards
Tim

How to Calculate number of months between two dates

Hi All,
   In one of the fomr developments, I have to calculate the
Number of Days
Number of Months ( Considering Leap Year) provided by the dates, end user enters in the form,
After going thorugh some forum discussion, I have come to know about so many things which were not clear till now.
I have gone through various forums too, some one suggets to make use of FORM CALC and some other JAVA SCRIPT. But the logic i want to build in java script.
The most interesting point is the DATE object is not getting created when i write the below code
var startDate = new DATE(oYear, oMonth, oDay);
I am still not clear, that really the date object gets created in Adobe form If so the why the alert box is getting populated when i write below lines
var oTemp = startDate.getFullYear();
xfa.host.messagebox(oTemp);
So, there are so many unclear things,
If any one can help me by suggesting the approach and how to build the logic in the JavaScript I would be really thankful
Regards
PavanChand

Hi,
ChakravarthyDBA wrote:
Hi
I want number of Sundays between two dates
example
number of Sundays count between '01-04-2013' and '30-04-2013' in one select query I have to include this as sub query in my select statement.Here's one way:
SELECT       early_date
,       late_date
,       ( TRUNC (late_date + 1, 'IW')
       - TRUNC (early_date,        'IW')
       ) / 7       AS sundays
FROM       table_x
;This does not depend on your NLS settings.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data.
Point out where the statment above is getting the wrong results, and explain, using specific examples, how you get the right results from the given data in those places.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ {message:id=9360002}

How to calculate the Time difference between 2 dates

HI All,
I am using HR_hk_diff_btw_2_dates to calculate the employee service dates.
For that i am inputing his hire date and Term dates and Output format as '05' i am getting output perfectly....
But problem is whe i am inputting the employee hire date is Dec 1 2007 and Term date is
March 31 2009 It is coming as 1 year 3 months 31 days instead of 1 year 4 months directly .......How could we make it make last date also working day and get the O/p as 1 year 4 months ?Please Advice..
Regard
sas

1. FM for difference betwwen two times:SCOV_TIME_DIFF
Import parameters               Value
IM_DATE1                        2008-01-01
IM_DATE2                        2008-01-01
IM_TIME1                        10:00:00
IM_TIME2                        11:30:00
Export parameters               Value
EX_DAYS                         0
EX_TIME                         01:30:00
2. SD_CALC_DURATION_FROM_DATETIME : Finds the difference between two date/time and report the difference in hours
L_MC_TIME_DIFFERENCE : Finds the time difference between two date/time

How to count number of sundays between two dates

Hi
I want number of Sundays between two dates
example
number of Sundays count between '01-04-2013' and '30-04-2013' in one select query I have to include this as sub query in my select statement.

Hi,
ChakravarthyDBA wrote:
Hi
I want number of Sundays between two dates
example
number of Sundays count between '01-04-2013' and '30-04-2013' in one select query I have to include this as sub query in my select statement.Here's one way:
SELECT       early_date
,       late_date
,       ( TRUNC (late_date + 1, 'IW')
       - TRUNC (early_date,        'IW')
       ) / 7       AS sundays
FROM       table_x
;This does not depend on your NLS settings.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data.
Point out where the statment above is getting the wrong results, and explain, using specific examples, how you get the right results from the given data in those places.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ {message:id=9360002}

How to Calculate Sum of Difference between two dates

Hi,
I'm using BI Publisher in Siebel CRM.
In RTF template I have the following expression to calculate the Difference between dates
<?xdoxslt:date_diff( 'd' , psfn:totext(CIRGSubmittedDate,"yyyy-MM-dd","MM/dd/yyyy"), psfn:totext(Done,"yyyy-MM-dd","MM/dd/yyyy"), $_XDOLOCALE, $_XDOTIMEZONE)?>
The above expression works for me to calculate the dates.
I need to calculate the Sum of all these dates for a Group.
Want to know the Syntax for Sum function using Date_diff.
Tried the following and didn't work.
<?Sum(xdoxslt:date_diff( 'd' , psfn:totext(CIRGSubmittedDate,"yyyy-MM-dd","MM/dd/yyyy"), psfn:totext(Done,"yyyy-aMM-dd","MM/dd/yyyy"), $_XDOLOCALE, $_XDOTIMEZONE))?>
Not sure what I'm doing wrong here...
Anyone please help...
Thanks
PV

Hi
To break the diff between 2 dates into days, hours, minutes, sec -- you can use the following:
select to_char( created, 'dd-mon-yyyy hh24:mi:ss' ),
trunc( sysdate-created ) "Dy",
trunc( mod( (sysdate-created)*24, 24 ) ) "Hr",
trunc( mod( (sysdate-created)*24*60, 60 ) ) "Mi",
trunc( mod( (sysdate-created)*24*60*60, 60 ) ) "Sec",
to_char( sysdate, 'dd-mon-yyyy hh24:mi:ss' ),
sysdate-created "Tdy",
(sysdate-created)*24 "Thr",
(sysdate-created)*24*60 "Tmi",
(sysdate-created)*24*60*60 "Tsec"
from all_users
where rownum < 50
HTH
RangaReddy

How to get difference in days between 2 dates excluding weekends

Hi all,
i have a requirement, to calculate the difference between 2 dates, in days.
eg: 01/08/2007 and 05/08/2007.
     Difference = 4 days.
But here my actual requirement is i have to calculate this difference excluding weekends (saturday n sundays).
eg: 01/08/2007 -
Thursday
     05/08/2007 -
Monday
so now Difference = 2 days.
Please help me regarding this.
Points will be rewarded for helpfull answers.
Thanks in Advance.
Regards,
Vineel

see these codes of rich
report zrich_0003.
data: begin of itab occurs 0,
      datum type sy-datum,
      end of itab.
data: weekday like dtresr-weekday.
data: number_lines type i.
parameters: p_sdatum type sy-datum,
            p_edatum type sy-datum.
itab-datum = p_sdatum.
append itab.
do.
if itab-datum = p_edatum.
    exit.
endif.
itab-datum = itab-datum + 1.
call function 'DATE_TO_DAY'
       exporting
            date    = itab-datum
       importing
            weekday = weekday.
if weekday = 'Sat.'
    or weekday = 'Sunday'.
    continue.
endif.
append itab.
enddo.
describe table itab lines number_lines.
write:/ 'Number of days between dates is', number_lines.
and
report zrich_0001.
parameters: p_start type sy-datum,
            p_end   type sy-datum.
data: idays type table of   rke_dat with header line.
data: workingdays type i.
call function 'RKE_SELECT_FACTDAYS_FOR_PERIOD'
     exporting
          i_datab               = p_start
          i_datbi               = p_end
          i_factid              = 'P8' " Fact Calender ID
     tables
          eth_dats              = idays
     exceptions
          date_conversion_error = 1
          others                = 2.
describe table idays lines workingdays.
write:/ workingdays.
I want to find the No.of working days between the two dates
regards,
srinivas

The method to provision the OIM System Date to a target System

Hi,
I want to provision the OIM System Date(date format : "YYYY-MM-DD HH:MI:SS") to a target System(DB Type:Oracle).
The Column type in The target System is Date Type.
I use the process adapter and assign the System Date to the Process Data - Date Type Column - in the target System.
it doesn't work.
How do i do?????
please help me

- That's simple. You have already created this date type variable in your process form. Now pass it in whichever format it is. In your code for creation in oracle, do a date conversion as required using custom code. This would work if you have written your code and you are not using DBApp Tables connector. Do it as follows:
     SimpleDateFormat input = new SimpleDateFormat("OIM_DATE_FORMAT");
     SimpleDateFormat output = new SimpleDateFormat("ORACLE_DB_DATE_FORMAT");
     Date date = input.parse("Pass form date over here");
     return output.format(date); // Pass this value to Oracle
- If its DBApp Table connector then connector must take care of this by itself.
Thanks
Sunny

How to move recovery partition to sd and where are the bios upates?

Hi,
Im a newbie. Firstly how do I move the recovery partition to my micro sd? Secondly, when I try to find support drivers, bios updates etc, the encore doesn't appear as an option, it only list notebooks!
Tia
Olly

I need some help with this also. The Toshiba utility Create Recovery Media won't back the recovery partition up to an SD card. It wants a USB drive. Why in the world would a tablet back up to a USB device when it only has an SD card?. I've seen some extremely laborious processes to create another kind of recovery partition. I'm out of space on my 32GB Encore and I need to get the recovery partition off of the C: drive. Help anyone...??? Thanks!

How to use Recovery DVD to install new copy of OS and CUSTOM PARTITIONS?

Hi
I have problem with start appropriate recovery function from created Thoshiba Recovery DVD.
I burn two DVD using Toshiba Media Recovery Creator witch was preinstalled on my computer. Now I want to use it to install new copy of Windows 7 OS on my laptop. BUT I would not want to clear entire HDD. I want to format only C: partition, and leave data on my D: partition. Also I want to define C: partition size.
When I insert DVD and boot form it, some app start but display info that all partition will be removed. I can not choose another option.
How can I do it?

Hello
Check please http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm document.
I think everything must be explained there. If you have more questions please let us know.

How to move or copy drivers between WDS servers

Problem: getting the same driver sets on multiple WDS servers
At our company we have two sites and two Windows Deployment Services servers. The server at our main site had all the driver packages for the hardware we use and we wanted the other server to hold the same set of drivers. There were too much drivers
to re-create them manually on the other server. We found no 'normal' solution to this problem, like an export or import.
However on examining the contents of the DeploymentShare (or RemInst share) I found a folder 'Stores' containing a folder 'Drivers' which seemed to contain all drivers and a folder 'metadata' containing a database and a locked file...
Here's what we tried on a hunch and what turned out to be working:
Stop "Windows Deployment Services Server' service on the primary server.
Copy folder 'DeploymentShare\Stores\Drivers' with content to another location.
Start "Windows Deployment Services Server' service again on the primary server.
Stop "Windows Deployment Services Server' on the target server.
Remove or move original 'DeploymentShare\Stores\Drivers'-folder.
Put 'Drivers'-folder from primary server in 'DeploymentShare\Stores'-folder
Start "Windows Deployment Services Server' on the target server.
Behold! The target server contains and services all drivers like the primary server (-:
Use at your own risk...

Hi Angry Technician
I had exactly the same issue as you. I had copied all the RemoteInstall files and folders from the original WDS server to the new server.
The Driver Groups appeared, but not the driver files within the groups. However when I restarted the WDS server a second time, they all appeared. I didn't change anything in between, other than adding a Win8.1 boot image (which I highly recommend
instead of the Win7 one!)
I realise you've probably restarted your WDS server a bazillion times before now (the posts are quite old) but I thought this might help someone else.
Thanks

How to move *MY* uploaded videos between different itunes - not sync

I've uploaded a number of videos I own and/or created to iTunes, so they appear as movies under my iTunes library. I've also successfully moved my iTunes library to a number of different macs I have using the kb articles.
Now what I need to do is move SOME, not all, of the videos, to another system and another exsiting and robust iTunes library. I don't want to move the entire iTunes library, my music, or photos, and I don't want to move all the movies or videos - just a couple of them.
Is there an EASY way to do this that does not involved wiping out an entire existing iTunes library???? and then trying to merge the old one back with the new one?
Ideally, I would like to shove them onto stick and move them via USB.....
Thank you in advance.

In iTunes, select the items then drag them from the iTunes window to the USB stick on the desktop.
Plug it into the other computer then File > Add to library and select the USB stick.

How to move e-mail messages between folders?

Coming form the iPhone to Nokia I find it difficult to move messages from inbox to another folder which I have created. Moreover, I cannot create a new folder on my Nokia n97 mini. Please tell me if there is a way to do this. Thanks in advance!

Moving email messages to another file location is not supported. But I don't see a need for it. Creating folders as part of Messaging function is still the same routine, go to My Folders.
I came here looking for answers, I ended up offering some...

How To Move Recovery Partition in between System & Data Partition To Extend System Partition?

Similar Messages

Maybe you are looking for