How to move the OS and files to a different internal drive?

I want to move the contents, including the OS, of the main hard drive on my 2 X 3 Ghz Dual core Intel Xeon Mac Pro. The drive is too small for any additional software, so I want to move it to a much larger internal drive. I am not able to use Carbon Copy Cloner.
Your help would be appreciated.

The hatter wrote:
This is just Part 2 of a thread from earlier today and yesterday:
https://discussions.apple.com/message/18583293
I had noticed that..... thanks for the headsup.
R

Similar Messages

Need a document about how to move the fact and dimension table's to different server's

Hello Experts,
I need a detailed doc on how to move the fact and dimension tables to different server's.Please help me out from this
Thanks in advance....

You still haven't told anyone what products besides Essbase you are using, without which this is an impossible question to answer.
https://forums.oracle.com/thread/2585515
https://forums.oracle.com/thread/2585171
Are you connecting to these tables from Essbase with a load rule / ODBC? Using Studio? Using Integration Services? Any Drill-Through reporting set up?
This may sound harsh, but if you truly don't know how to answer any of these questions you should probably not be anywhere near this task...

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

Copy your ENTIRE iTunes FOLDER to an External Drive...
Full Details Here > http://support.apple.com/kb/HT1751
To Operate iTunes from the External Drive...
Start iTunes with the Option key held down and guide it to the new location of the library.
Be Sure the drive is Formatted Mac OS Extended (journaled)
Also... have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

HT4527 How can move the apps and playlists on my iPad to my Mac? Whenever I attempt to sync, I get a message stating that all apps and music on my iPad will be replaced by content from my Mac and there are no content. Thanks.

How can move the apps and playlists on my iPad to my Mac? Whenever I attempt to sync, I get a message stating that all apps and music on my iPad will be replaced by content from my Mac and there are no content. Thanks.

the apps will not be deleted if the itunes is authorised for the apple id from which you downloaded the apps.
for the songs if you have downloaded it from a store other than itunes an app "TuneAid" will help you. download the full version then you can copy all the songs on the ipad to ur itunes library

How to move the code and deploy the code from Dev environment to SIT.

Hi,
I have a requirement.
I want to move the components and deploy the code from dev Environment to SIT environment using Ant Script for AIA.
Before doing this is any pre-requisites required?
Can you please help on this,how to do?
Thanks in advance.

Further to add to Anish Statement follow the steps to easily migrate the code to different environment.
Steps:
First log on to the EM Console and export the Composite Flow as a SAR file to a location.
In Jdeveloper create a project using the same name of a SAR file like - ProcessSalesorderFlow
import the project using the option import the composite using a SAR File.
After import , then click on the composite and then generate the config plan.
In config plan add all the url changes using the search and replace Tags.
And in case if you have a JCA Adapters the same has to be taken care in SIT environment why because during deployment a lookup happens and deployment fails if it dont find the JNDI Name.
Take the SAR file adn config plan seperately from JDeveloper.
Now open em console again and then deploy it using the config file and SAR file.
Thanks,
Venugopal SSS RAJA

How to move the mirrlogA and mirrlogB from C drive to D drive

Hi experts,
I Need to move the mirrlogA and mirrlogB directories from C drive to D drive do i need to make any modifications to the configuration files.
i can only this line in intDEV.ora file.but i can see the directories in C drive mirrlogA and mirrlogB but i cant find the entries in initDev.ora abt the C drive.
"control_files = (D:\oracle\DEV\origlogA\cntrl\cntlrDEV.dbf, D:\oracle\DEV\origlogB\cntrl\cntrlDEV.dbf, D:\oracle\DEV\sapdata1\cntrl\cntrlDEV.dbf)"
Can you suggest me how to move them and how to restart the system with out errors.
regards,
surya.

Hello Surya,
> I Need to move the mirrlogA and mirrlogB directories from C drive to D drive do i need to make any modifications to the configuration files.
If you do not modify any oracle "settings" .. you have to do 2 things.
1) Change the entry in the pfile / spfile for the control files
2) Rename the redo log files to the new location with the ALTER DATABASE RENAME command after you have shutdown your database
For more information how to rename a file take a look at:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/onlineredo.htm#sthref951
Regards
Stefan

HT1349 Hello, how to move the iTunes master file from C drive to an external drive and them iTunes stick with the external drive after on an on going basic?

My desktop C drive is full HD of 1 TB, I would like to move the current iTunes master file to an external 4TB drive and then iTunes stick with the external drive
Could this be done, if yes how to do it?
Thank you for your help
Henri

If it's the same as with a PC, the procedure would be to:
(a) Plug in the new external drive,
(b) Set your iTunes preferences such that the iTunes Music Folder is on the new drive,
(c) Use the iTunes "Consolidate Library" utility to copy your library to the new location.
(d) When the transfer is complete, check "Get Info" on some songs to verify their location.
The original files will remain on the old drive, so you'll have a way to recover should there be a problem. You may need to manually copy any iPhone/Touch Apps to the new drive since I'm not sure those are transferred with the Consolidate utility.

How to move the pages and reports from one dashboard to another

hi all
can please any one tel me hw to copy the reports along with pages from one dashboard to another
Thanks

Hi,
Go to Administrator->Manage Presentation Catalg->Click on Group folder under which the dashboard and reports are present
1)Create one folder and copy the reports which are present in the dashboard pages you want(reports will be under some specific folder,open and copy one after the other to the newly created folder).Do this if you want other set of same reports for new dashboard that you are creating
2)Click on _portal and create a new folder(new dashboard)
3)Click on dashboad that is to be copied
4)copy the pages one after the other into new dashboard folder
If you are not keeping new set of reports then no need to point reports in pages,if reports are placed under new folder then go to each page and pull those reports from newly created folder.
Regards,
Srikanth

How to move new Windows 8 file swapfile.sys to another drive?

Windows 8 has a new swapping / paging file called swapfile.sys. It resides in %SystemDrive% directory, or C:\ for most users. It looks to be a swap file for Modern UI / Metro apps (source: https://blogs.technet.com/b/askperf/archive/2012/10/28/windows-8-windows-server-2012-the-new-swap-file.aspx?Redirected=true).
I wanted to ask how this can be moved to other drives, the same way pagefile.sys etc can be.
After having just installed Windows 8, I am going through the process of moving files that get a lot of writes, like pagefile.sys and hiberfill.sys, to other mechanical drvies, instead of being on my SSD with it’s limited write life. There seems to be no method
of doing this for swapfile.sys.
After a search, only this tread turned up (http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/to-move-swapfilesys-to-another-drive/bd1d5424-e410-4742-9668-e5060a021d40?tm=1356272384010), for the same question but it as never answered. All
that was explained, was how to disable both pagefile.sys and swapfile.sys. Also how to move pagefile.sys. The question about moving swapfile.sys was never answered. Hence why I am asking again. There also seems to be no registry settings for this file, that
I could find to change, to accomplish pointing it's location elsewhere.
Am not interested into getting into a debate about whether it is worth while moving files off SSD's to save on writes.
So if someone, ideally from Microsoft, can explain how to do, with this new swap file, what had been possible with the existing page file, for a good few Windows versions it would be much appreciated. Or how it can be disabled, without disabling the normal
pagefile setup, as I don't use and don't intend Modern UI apps.

I also think this could not be moved and I could not find any document about moving it, either.
Thanks.
Nicholas Li
TechNet Community Support

How to Move the Shared Services Registry to a different SQL Server

I have an Essbase installation purely running Essbase and Financial Reporting/Web Analysis.
The Shared Services database is held in SQL Server 2005 on one hardware platform and I need to move it to an alternative hardware platform also running SQL 2005.
I thought it might be as easy as backing up from one server and restoring to the other and then running EPM System Configurator.
Firstly, when running configurator and selecting the Hyperion Foundation Configure Database option, on the 'Shared Services and Registry Database Configuration' screen the details of the original hardware are displayed, clicking 'Next' gets no response.
If I can resolve this first issue, how do I then re-point the database to the new server?
Any help would be appreciated.
Thanks.

Hi John
Took a look at the link thanks.
On point 3 it says to stop the original database. If you take the database offline, in configurator you don't then get the options in option 5!
In the dos command window for configurator I get 'Unknown Source' messages (either using current server or new).
configtool.log lists as follows. Does this point to anything?
Thanks.
(Sep 15, 2011, 03:26:47 PM), com.hyperion.hit.wizard.swing.ComboFieldSwingImpl, DEBUG, In ComboFieldSwingImpl.fieldChanged() method:,fld items: [Oracle, Microsoft SQL Server, IBM DB2], value: 1, selected idx: 1
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, validate
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, connect test
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, driver set
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, server= aeSQL02.xxxxxxx-xxxxxx.com
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, whiteSpace remove
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, begin test cycle
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, define driver
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, make connection
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, set URL
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, connection is NOT null
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.DBConnectionForm, DEBUG, DB type string = MSSQLServer
(Sep 15, 2011, 03:26:50 PM), com.hyperion.cis.config.Configurator, DEBUG, Loading DBConfigurator class for product: Foundation_1_9.5.0.0
(Sep 15, 2011, 03:26:51 PM), com.hyperion.cis.config.Configurator, ERROR, Error:
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at com.hyperion.cis.config.Configurator.loadProductDBConfigurators(Configurator.java:210)
     at com.hyperion.config.wizard.impl.RegistryWizardState$1.validate(RegistryWizardState.java:205)
     at com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel.queryExit(WizardFormAdapterPanel.java:95)
     at com.installshield.wizard.awt.AWTWizardUI.doNext(Unknown Source)
     at com.installshield.wizard.awt.AWTWizardUI.actionPerformed(Unknown Source)
     at com.installshield.wizard.swing.SwingWizardUI.actionPerformed(SwingWizardUI.java:1693)
     at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationController.notifyListeners(SwingWizardUI.java:1899)
     at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationController.actionPerformed(SwingWizardUI.java:1894)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.NullPointerException
     at com.hyperion.foundation.config.FoundationDbConfigurator.isHubInstalled(FoundationDbConfigurator.java:133)
     at com.hyperion.foundation.config.FoundationDbConfigurator.<init>(FoundationDbConfigurator.java:38)
     ... 36 more

How do I install programs and files from my backup hard drive?

I had my computer reset to original settings after I backed it up to an external hard drive and now I'm not sure how to reinstall everything from there.

Time Machine is not a application installer, it is a backup and restore app. If you erased or lost an App then open Time Machine, navigate to a time when you know you have the app and then restore it.
Have you done any backups using the Seagate drive or is it a brand new external HD? Remember we are not there to see what you are attempting to do so we are relying on you to be as descriptive as possible.

How to capture the LOCK and UNLOCK status of an Internal Order

Hi,
I am trying to upload the data for transaction KO02. The order can be in LOCK status or UNLOCK status. Could you please let me know how can we determine whether an order is locked or unlocked. Is this data stored in some table. Help is very much appreciated.
Thanks in advance,
Suresh.

Hi,
i assume it's in table JEST
so select:
SELECT        * FROM JEST
           WHERE OBJNR = aufk-OBJNR
            AND   STAT   IN S_STATI
Andreas

How can I move one years worth of Raw photo files to a different hard drive and perserve the edits

How can I move one years worth of raw photo files to a different hard drive (to manage space) and preserve the develope module edits and still see them in the Library module?

The easiest situation, is where this year's worth of images is grouped physically inside one parent folder (something many people build in from the start, in any case).
If there is a parent folder on disk, but you are not currently seeing that inside LR's Folders panel, you can make this visible to LR by right-clicking on one of the folders which live immediately inside that, and selecting "show parent folder". This gives you a single "handle" by which to manipulate the whole grouping.
Then it is just a matter of moving this parent folder. It's usually as simple as dragging it from one place to another inside LR's Folders panel, however this is a little more difficult when it's a question of another drive which does not yet appear there.
So an alternative method will likely prove more straightforward: physically move the whole year folder into the other drive using your operating system's Explorer/Finder. The folder (and subfolders, and all the contained images) will change with ? icons inside LR, and it all goes "offline". This is because LR's records of where everything is, are known not to currently work (the former location is now not available). But all the edits, thumbnails, keywords, collections etc are still in place because these things are still remembered in the Catalog - and the fullsize previews are still cached also.
Then right-click on the parent folder in LR's Folders (the top folder which shows a "?") and select Update Folder Location. Then browse to the other disk and identify where this folder is now to be found. LR updates all its records and the whole grouping carries on just as before, only using a new storage location for each image concerned.

Any way to re-dnld purchased music? had program change and somehow music went to My Pic's Folder which of course can't be used. Can't figure how to "move" the file around. Have Windows XP..

any way to re-dnld purchase music from itunes to computer? had a program change and somehow previously purchase music went into My Photos File. ???? do not know how ! can't figure out how to move the music to the itunes folder.

Yes, visit this link. It should help.
Downloading past purchases from iTunes

HT1026 When I do this a copy is created, and when I try to move the old file to trash I get a warning that this clip will no longer be visible in my project. How do I make the drag and drop move the clip and not just make a copy?

In Imovie 2008 when I drag an event to another drive, the event is copied and not moved. Thereafter if I try to move the original clip to trash I anm warned the clip will no longer be accessible in the project it is linked to. How do I get to move the clip and keep it connected to the project?

I have iPhoto '09. The problem occurs when I try to move a photo from iPhoto onto a document or anywhere. I click on the photo and try to drag it to the document. When I do this a message box pops up saying that the file cannot be opened because it is empty. This only happens with a small number of photos but I just don't understand the fact that I can see these photos (and print them but only directly from iPhoto) but I can't do anything with them since, for some reason, the computer is seeing the file as empty.
Hope that helps. Thanks.

How to move the OS and files to a different internal drive?

Similar Messages

Maybe you are looking for