How to move the position line to the "snape" ?

I want to move the position line as the "snape" function ? I want to move the position line to the very beginning of objects .

Forgot to add, 3 "gold dust key commands" ( extemporising on my good neighbour iS) ....
1 - Click on a region then use Key Command "Set Locators by region"
2 - "Go to left locator"... zips the Song Position Line to the very beginning of region
3 - "Go to right locator" ...zips the Song Position Line to the very end of region
... when I was first introduced to these commands in late 1998... after struggling with Logic for 6 months, I nearly fainted with relief and delight
Good luck young man
Powerbook 5,8 - LP7.1.1   Mac OS X (10.4.9)   1.67 GHz PowerPC G4, 1.5GB SDRAM

Similar Messages

  • How to move the arrows in navigation view?

    Hi, when i am using the navigation to define my page flow, i could move the page in the navigation with "SHIFT+MOUSE",but the arrow from one page to another can't be moved if i don't change position of the two pages, and when there are many pages, the arrows cross with each other, and it becomes hard for me to see them clearly. so how to move the arrows to organize them in a clearer view(Just like that in BEA Weblogic Workshop with JPF design)? is it something needes improving in Creator EA, or i just didn't find the way to do this?please help.

    Hi,
    We thank you for your valuable feedback. An RFE has been filed on your behalf for the same.
    Cheers
    Giri

  • How 2 move the message from memory card 2 phone me...

    did anyone know in nokia N73 how 2
    move the message from memory card move
    to phone memory???? did anyone know
    how 2 move it??? teach me plz.....

    Here is an easy way to move your messages from Phone Memory to Memory Card or from Memory Card to Phone memory In Nokia models.
    1- Install latest version of Nokia PC Suite and connect your set.
    2- Open Nokia Communication Centre. (Select Phone Memory or Memory Card from which you want to move messages to other memory)
    3- Select all messages in a single folder (Inbox/Sent Items or from My Folders) and click on file> export. This will create *.csv file.
    4- Download NBU Explorer 1.8 from http://www.soft82.com/download/windows/nokia-nbuex​plorer/  (You must have installed Windows Installer 3.1 and Microsoft .Net Framework 3.5 to run NBU Explorer. You can easily download these from Microsoft Site,)
    5- Open *.csv file in NBU Explorer and click File > Export All. (Your all messages will be exported as *.vmg files.)
    6- Disconnect and connect your phone again in Nokia PC Suite.
    7- Now set your target memory in your phone for messages.
    8- Open Communication Centre and Select your desired folder then click on file > Import messages by selecting multiple messages *.vmg files. (You don’t have to import messages one by one but you can import all messages in a single folder at once)
    9- And you have done it.
    10- You can import *.csv list in Nokia PC Suite rather *.vmg files, but in this case, all the spaces (blank spaces) in your messages will be lost. All the text of your messages will be merged to a single line. So exporting via NBU Explorer is recommended.  
    11- Any query?  Contact me at ********@yahoo.com.
    MODERATOR'S NOTE:
    E-mail address has been removed from this post as it is unwise to post such personal information in a public web forum. This is for your personal safety and privacy.
    Edited by: Aikin19

  • How to move the data of a table from sqlplus to XML file

    Hi,
    Could you pls guide me how to move the data of a table from sqlplus to XML file.
    i want to do it from sqlplus rather than toad.pls help
    Thanks

    Oh..I'm in 9i.
    Try this out..and let me know.
    DECLARE
    CTX DBMS_XMLGEN.CTXHANDLE ;
    XML CLOB ;
    F UTL_FILE.FILE_TYPE;
    XMLC VARCHAR2(32767);
    BEGIN
    CTX := DBMS_XMLGEN.NEWCONTEXT('SELECT * FROM department1 ') ;
    XML := DBMS_XMLGEN.GETXML(CTX) ;
    XMLC:=TO_CHAR(XML);
    SHOW_ENVELOPE(XMLC);
    F := UTL_FILE.FOPEN('ATTACH_FILES','DEPT.XML', 'W');
    UTL_FILE.PUT_LINE(F,XML);
    UTL_FILE.FCLOSE(F);
    END ;
    Good luck!!!
    Bhagat
    null                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to move the value from a character field to numeric or packed decimal

    Hi,
    can anyone explain me on how to move the value from a character field to numeric or packed decimal.
    Please help me on this. Thanks...
    Regards,
    Rose.

    Hi ,
    if you use keyword MOVE u may loose the decimal and thoussan separator and if u don't want to loose them just call the FM ..HRCM_STRING_AMOUNT_CONVERT.
    i doubt wherther it is HRCM or HCRM just try using *
    this will suit ur requirement.
    Regards,
    KK

  • I have installed the LATEST VERSION of itunes in my windows and i bought the new ipad with retina display ,i had moved music into the ipad from my windows through the itunes but I DONT KNOW HOW TO MOVE THE VIDEOS IN MY VIDEOS LIBRARY OF MY COMPUTER TO MY

    i have installed the LATEST VERSION of itunes in my windows and i bought the new ipad with retina display ,i had moved music into the ipad from my windows through the itunes but I DONT KNOW HOW TO MOVE THE VIDEOS IN MY VIDEOS LIBRARY OF MY COMPUTER TO MY

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • How to move the anchor object in indesign cs2 using js?

    i can able to move the normal textframe and other objects but cant do this for anchor objects.
    syntex:  anchorobject.move([x value,y value],undefined,true)
    how to move the anchor objects?
    thanks
    subha

    Could it be that the anchord object in question won't move because you have it set to keep within margins which is preventing the move you're requesting? I've certainly run into that.
    I've also run into the situation where the object model thinks the anchored object is in one place when it is actually in another because of that same keep within margins option. In this case, a move will apparently not work because the move is invisible, it being completely outside of the margins -- although that only applies to relative moves, I think.
    Dave

  • How to move the process chain from Unassigned node to a new node in 3.5?

    Hi all,
    I have created a new process chain in the development and it is falling under the Unassigned nodes. I want to move that process chain to an another node. but i am unable to do that
    Can anyone let me know how to move the process chain from unassigned node. I have drag and dropped but still the same in BW 3.5 ?
    Thanks
    Poooja

    Hello,
    Try this....
    Double click on your process chain. Via the menu select:
    Process chain > Attributes > Display components
    Select F4 (possible entries)
    At the bottom of the window you will find a create icon
    to make your own component.
    After you created it, assign it to your process chain.
    Don't forget to save the process chain.
    Regards,
    Sivaram

  • In FF 29.0, how to move the address bar on the top of the tabs bar?

    It is OK in Firefox 28 and lower to set browser.tabs.onTop=false to move the address bar on the top of the tabs bar. But in Firefox 29, I can not find the browser.tabs.onTop
    who can tell me how to move the address bar to the top of the tabs bar?

    Here's the real, and only, solution:
    ftp://ftp.mozilla.org/pub/firefox/releases/28.0/win32/en-US/

  • Any way to re-dnld purchased music? had program change and somehow music went to My Pic's Folder which of course can't be used. Can't figure how to "move" the file around.  Have Windows XP..

    any way to re-dnld purchase music from itunes to computer? had a program change and somehow previously purchase music went into My Photos File. ???? do not know how !  can't figure out how to move the music to the itunes folder.

    Yes, visit this link.  It should help.
    Downloading past purchases from iTunes

  • HT5362 How to move the banners from the upper right corner to the low right corner of the screen on Mac (Mavericks)?

    How to move the banners from the upper right corner to the low right corner of the screen on Mac (Mavericks)?
    Sometimes, when I am about to click something in the upper right corner, the banners stand in the way. It is very annoying.
    However, I still need them and it is not an option to completely turn off notifications.
    Has anybody faced the same problem?

    Yeah, i've been playing around a bit with Notifications, and not being able to move there location is very annoying. The default location  normally means it is covering one or more tabs in Safari (or any tabbed application for that matter). Might have to try Growl again.

  • Need a document about how to move the fact and dimension table's to different server's

    Hello Experts,
    I need a detailed doc on how to move the fact and dimension tables to different server's.Please help me out from this
           Thanks in advance....

    You still haven't told anyone what products besides Essbase you are using, without which this is an impossible question to answer.
    https://forums.oracle.com/thread/2585515
    https://forums.oracle.com/thread/2585171
    Are you connecting to these tables from Essbase with a load rule / ODBC?  Using Studio?  Using Integration Services?  Any Drill-Through reporting set up?
    This may sound harsh, but if you truly don't know how to answer any of these questions you should probably not be anywhere near this task...

  • How to move the objects from Infoarea to another?

    Hi,
    How to move the objects from Infoarea to another?
    Thanx in advance,
    Ravi.

    Hi ..
    If the drag & drop functionality is enabled you can drag the catalog and drop it in another InfoArea just as you do with files on your PC.
    The other procedure is Use the right mouse button to create an InfoObject catalog in the InfoArea. If you want to make a copy of an existing InfoObject catalog, specify a reference InfoObject catalog.
    and check this  thread
    Re: Info Object Mapping to Info Area

  • How to move the entries of table BNKAIN between systems

    Hi,
    Is there any way to export the entries of table BNKAIN from one SAP system (development) to another manually? This is the table which is not transported via a transport...even in development system the "transport entries" option is not active. IN SM30 the maintenance view is not created.
    Can you advice how to move the entries somehow manually?
    Thanks for any assistance!
    br,Slawek

    Hi, thanks for reply.
    In fact I checked the table BNKA and the entries there are not helpful for me in the target system.
    We are using there some user exit which is using the table BNKAIN and the following entries are there:
    Client Bank Country Bank Key        Internal bank
    790            CA           IHC6            1
    790            DE           IHC1            1
    790             FI             IHC             1
    790            FR           IHC3            1
    790            GB           IHC4            1
    790            US           IHC5            1
    I checked the properties of that table in SE11 and it is maintainable only with restrictions..thus I need to ask some other basis expert which will help me to inlcude those entries into a transport.
    Anyway thansk for your hints!
    Bye

  • OpenScript: 1.     How to move the scripts from one location to another location. in OpenScript; Copy, paste or Import, export

    How to move the scripts from one location to another location. Copy, paste or Import, export

    Both way you can do.. Difference is - if you copy paste to another folder script dependencies will not move with the same( ie Assets added), whereas if you export and import the script all dependencies will be correlated automatically

  • How to move the objects of IR and ID to Production

    hi
    i have done a file to file scenario and i have  a doubt of how to move it to the prodn
    plz help me out
    (how to move the contents of SLD IR and ID to Production)

    Hi Jaya,
    This is very much possible, all that you have to do is, in the SLD, define transport targets. that is which Dev/ QA system corresponds to which production system.
    Please go through this help link and get to more on this...
    http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/content.htm
    Also have a look at this option of transporting using File System...
    http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/content.htm
    Regards,
    Abhy Thomas

Maybe you are looking for

  • New contact added without Permission

    Today I had a new person added to my contacts list, (not recent conversations), that I did not approve. I have had people I don't know randomly request to be added but this is the first time where someone was added without my consent.  First off, I w

  • IDoc message type cut off in WE02

    Hi, i have IDoc2IDoc Scenario. I already checked IDx1 and IDx2 for IDoc Metadata and in SXMB_MONI the Inbound IDoc looks like it should with right Basic and MessageType of the IDoc. But when i check WE02 in reciever system the Message type is cut. In

  • Not able to create project using tcode solar_project_admin

    Hi, In solution manager, in tcode solar_project_admin - when creating project, say (SOL200), I got message saying that (Project SOL200 already exists) . from tcode solar_project_admin --> Project -> create.  I can not create any project, whenever I t

  • Link to download libdvdcss for Handbrake not working?

    Hi Everyone, I'm trying to download the libdvdcss package so I can run the 64 bit version of Handbrake and transfer my DVDs to my iPad, however the link to download it (from Mac themselves, along with many other webpages) is not working.  Where is a

  • Question to Ismail Saliman about.... you know what I mean Ismail!

    Dette er en bra it side: http://www.itavisen.no/ Dette er en annen bra side med nyheter om Symbian OS for rompa di! http://www.vg.no/ http://www.digital-tutors.com/ http://www.amobil.no/ http://www.simplymaya.com/ http://www.tothegame.com/ http://www