How to move wax line down?

Is it possble to move wax line down from an text adornment like it does "Paragraph Rules"->"Keep in frame"?

Olemacr wrote:
Thanks  for the reply but nothing happens on my iMac using those keys.
There are global shortcuts, which should work in all apps; there are Cocoa text engine shortcuts, which should work in all apps which use the Cocoa text engine; and there are app shortcuts. How a specific app responds to a command such as Page Up is not necessarily under the OS control.
The shortcuts indicated by Don Archibald are correct. How any specific app responds is another matter. So tell us exactly what app (and version) you are using and maybe we'll be able to help.
I did find that on my MBP fn and up or down arrows did move a page at a time
For some keys, and for obvious reasons, on the MBP fn is similar to control.

Similar Messages

  • How to move pages up/down

    Is there a key combination that will allow me to move up or down a page at a time?

    Olemacr wrote:
    Thanks  for the reply but nothing happens on my iMac using those keys.
    There are global shortcuts, which should work in all apps; there are Cocoa text engine shortcuts, which should work in all apps which use the Cocoa text engine; and there are app shortcuts. How a specific app responds to a command such as Page Up is not necessarily under the OS control.
    The shortcuts indicated by Don Archibald are correct. How any specific app responds is another matter. So tell us exactly what app (and version) you are using and maybe we'll be able to help.
    I did find that on my MBP fn and up or down arrows did move a page at a time
    For some keys, and for obvious reasons, on the MBP fn is similar to control.

  • Data Modeler - How to move relationship lines?

    I can't figure out how to move the relationship lines on the data modeler.
    Tried a bunch of things that have worked in all the other modelers I've used, but no luck. Couldn't find anything in the help text about it, either.
    Edited by: David Wendelken on Nov 14, 2008 4:07 PM

    Hi Jim, David,
    AutoRoute (on/off) can be managed at diagram level - use right mouse click on empty space.
    In current published release (AutoRoute off) - straight lines (only two connection points) cannot be moved. You need intermediate points (at least one) for better arranging. Points (Elbows ) are created using Ctrl+mouse click.
    Connection points also can be moved in next EA release.
    Philip

  • How to have a line down middle of page betw 2 columns but...

    for some graphics, the graphics flow over the two columns. In setting up a template, how to make that line be flexible so that when there is a graphic that takes up more space, the graphic has an amount of white space around it..(would that be an object style). Ok, would you put the line on the master page?

    If you are referring to text wrap when you say outset, then it will push the text in the main frame out of the way, but it won't push the rule or leave a gap next to it. The only way to do that is to adjust the rule or hide it with something (like the [Paper] stroke).
    If the caption frame is going to be below the image, this gets more complicated, especially if the image isn't always at the top of the page. About the best you can do for that is to apply the same stroke to both the image and caption frame, and have them overlap or touch, which means you can have spacing between the two from the width of the stroke to twice the width, but not more. You'll also need to fill the caption frame with paper to knock out the rule.
    If the image group will always completely cover one end or the other of the rule you can pay with different width strokes for the two frames.
    It might be best to put a grouped image/caption frame in a library, already styled, or leave one on the pasteboard somewhere.

  • How to move a line on mousepress or mousedrag

    i drew a line using drawline function in graphics .how can i move it on mousepreess or mousedrag?

    my email-id is:
    [email protected]
    [email protected]

  • HT1535 I would like to know how to move up or down a song in a playlist in Itunes

    Hello all,
    I created a new playlist but do not like the way my songs were list. I want to organize them manually in a order that I want them to be played.
    I want to know how I can change to move songs and save it so when I sync with my ipod it will remain the way I ordered them.
    Thanks for your reply

    Select a playlist. The View > View Options and choose Manual Sort from the sort by fields. Then you should be able to drag songs to whatever ored you want and sync through to the ipod

  • How many movies will an 8 gb iPod hold?

    How many movies could I down load on an 8gb ipod touch 4g?

    An 8GB iPod only has about 6.3 GB available to the user.  You could get about four-five movies on the iPod.  However, that depends upon the size/length of the movies.

  • How do I get iCal to print the calender just as it appears on the screen, not as lines down the side to indicate length of event?  I like the whole bubble of time approach as it is on the screen.

    How do I get iCal to print my calendar just as it appears on the screen?  I like the whole block-out method rather than just a line down the side indicating the time devoted to an event.  Is there any way to change the style of how it' sprinted?

    View > Sidebar > Bookmarks (Ctrl+B)
    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

  • How to add new line in transact move order line

    Hi,
    i am able to update locaotr in Transact move order.
    But i want to add two locators for the same line.
    I tried to insert one more record in data base, but getting error unique index error.
    so how can we add new line in transact move order line .
    please help to slove this isse.
    Thanks In Advance
    Venu.

    Hi,
    the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
    nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
    So, I don't see why you need to add a new line in transact move order.
    You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
    Thanks

  • HT203167 I ordered and paid for a movie without being on wifi or connected to my laptop.  I have not been able to down load the movie that I paid for so how do I get it down loaded?

    I have a couple of questions.  I down loaded a movie when I was not hooked up to wifi or connected to my laptop.  I was charged for the movie but I have not been able to down load it or find it anywhere in my account. 
    Question:
    1.  Where do I find this movie and how do I get it down loaded to my I Pad?
    When I signed in to ask this question I had to go through a lot of sign in problems and also create a user name that is completely different that any of the sing in information that I have used previously.   Which create a lot of questions:
    1.  Why did I have to create a user name that I never had to do before?
    2.  Will this change the sign in process in the future?
    I will appreciate the answers to these questions
    Thank you very much.

    yes it could well do if your bank thinks there is something going on that is not from you they will block it. I have had this problem before, I would of thought they would of phoned me but they don't do that.
    If I was you I would go to my bank make sure they are not doing anything like that. If they say it's all fine then i would phone up apple them self or go into my local apple store, as they should be able to look at what there servers are saying why it's not working.

  • How can I activate drill down report for planned line items please urgent?

    Hi Everyone,
    Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
    Kind regards
    Arvey.

    Hi
    It is based on the reports attached in the Report Group - TCODE: GR53
    In the Report Group screen
    Press CONFIGURE – This is to attach any Drill Down reports.
    Press the “Insert Line” icon
    As is the screen may be used to insert a Report Writer report group. To add an ABAP, press “other report type”
    Double click on “ABAP Reports”
    Enter the name of the ABAP and ENTER
    <b>RCOPCA08                       Profit Center: Plan Line Items</b>
    VVR

  • How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center?  I can select 2 page view and cover page in 2 page view, but the dotted line shows up.  Thank you!!

    How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center?  I can select 2 page view and cover page in 2 page view, but the dotted line shows up.  Thank you!!

    Hi skt102711,
    I would like to inform you that acrobat doesn't support .epub to .pdf format conversion. Please browse this Link for more information : Supported file formats | Acrobat, Reader
    Regards,
    Rahul

  • How do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

    how do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

    I'm partial to this series:
    After Effects basics tutorials by Andrew Devis
    The subject matter is very clearly-defined by topic.
    And AE shouldn't up & quit on you... but you haven't breathed a word about your system or your AE version.  Please share.

  • I followed directions of arrowing down and hitting delete, but cannot get certain addresses out of by address/location bar. What am I doing wrong? I also have not been able to figure out how to move existing bookmarks into folders.

    I am running Windows Vista, Firefox 3.6.13, on a 18 month old HP a6700f. I read the embedded help, but the instructions for deleting addresses doesn't work and it doesn't tell how to move existing bookmarks to a folder.

    See:
    * http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
    Entries in the location bar drop down list with a yellow (blue on Mac) star at the right end are bookmarks.<br />
    You can remove such a bookmarked item that shows in the list if you open that url in a tab and click the yellow star in the location bar.<br />
    This will open the Edit This Bookmark dialog and you can click the Remove button to remove the bookmark if you want to remove such a bookmarked entry.<br />
    * [[Clearing Location bar history]]
    * [[Cannot clear Location bar history]]

  • How to cancel a Move Order line using API

    Hi
    I have a requirement, where I have to cancel Move order lines.
    At times, multiple Move order lines are getting created for the same Sales order line.
    Even after the Sales Order line is shipped and closed, the move order line is still open and it also has a corresponding pending transaction in mtl_material_transactions_temp table.
    I came across INV_MOVE_ORDER_PUB.process move order line API.
    how do I use it to cancel the move order line. Any sample codes would be highly welcome.
    Thanks

    Finally, found an alternate solution.
    used the following code.
    ===================================
    SET serveroutput on size 1000000
    DECLARE
    l_return_status VARCHAR2(100);
    l_msg_count NUMBER;
    l_msg_data VARCHAR2(2000);
    l_msg_index NUMBER;
    l_user_id NUMBER;
    l_resp_id NUMBER;
    l_appl_id NUMBER;
    l_org_id NUMBER := &org_id;
    l_move_order_line_id NUMBER := &mo_line_id ;
    BEGIN
    SELECT user_id
    INTO l_user_id
    FROM fnd_user
    WHERE user_name = 'PRAWILNSON';
    SELECT responsibility_id
    ,application_id
    INTO l_resp_id
    ,l_appl_id
    FROM fnd_responsibility_vl
    WHERE responsibility_name = 'Order Management Super User';
    FND_GLOBAL.apps_initialize (l_user_id, l_resp_id, l_appl_id);
    MO_GLOBAL.set_policy_context ('S', l_org_id);
    MO_GLOBAL.init;
    DBMS_OUTPUT.put_line ('Calling INV_MO_BACKORDER_PVT to Backorder MO');
    DBMS_OUTPUT.put_line ('===============================');
    inv_mo_backorder_pvt.backorder (p_line_id => l_move_order_line_id
    ,x_return_status => l_return_status
    ,x_msg_count => l_msg_count
    ,x_msg_data => l_msg_data);
    DBMS_OUTPUT.put_line ('Return Status is : '|| l_return_status);
    -- Check Return Status
    IF l_return_status = fnd_api.g_ret_sts_success THEN
    DBMS_OUTPUT.put_line ('Successfully BackOrdered the Move Order Line');
    COMMIT;
    ELSE
    DBMS_OUTPUT.put_line ('Could not able to Back Order Line Due to Following Reasons' );
    ROLLBACK;
    FOR j IN 1 .. l_msg_count LOOP
    FND_MSG_PUB.get(p_msg_index => j
    ,p_encoded => fnd_api.g_false
    ,p_data => l_msg_data
    ,p_msg_index_out => l_msg_index);
    DBMS_OUTPUT.put_line ('Error Message is : '|| l_msg_data);
    END LOOP;
    END IF;
    END;
    /

Maybe you are looking for