How to move WordPress from (/blog/) directory to main directory (domain)

Hello Friends.
I have recently installed WordPress in another folder (/blog/) in my Main domain (www.kenapexvision.com) directory for the purpose of evaluation. I learnt that I could do that in order to evaluate WordPress and that afterwards, I could remove the folder (/blog/) entirely if I didn't like it or move the content of the (/blog/) back to my root directory (domain) to overwrite my previous site if I like to use WordPress further.
Well, I think I am okay with WordPress currently and would like to retain all the work that I've done on WP and hence move it to my main site (www.kenapexvision.com) where I could integrate blogging with other stuffs that I want to do on the site. Please how do I go about performing this task? are there special things that I would need to do before this?
Thank you. NKC

WordPress questions are best posted in the WordPress Forums.
https://wordpress.org/support/topic/how-do-i-move-new-site-from-subfolder-to-root
Nancy O.

Similar Messages

How to move files from external drive to main drive WITH keywords?

On a recent trip, I uploaded several thousand images onto an external hardrive that I was using with my laptop.I keyworded and edited these files while on the road.
Back home, I want to move the files (keywords and all) to my permanent LR library which resides on a different hard drive. How can I make this transfer without losing keywords?
Thank you in advance.

Hi Jessica,
There seems to be a confusion of terms here: the catalog is where LR stores all its information (what your referred to as LR's library in your original post).
While you were on the road, did you use LR to add keywords to the photos, or did you use some other tool? If you used LR, than you already have a catalog on the laptop, which you can then import into your main LR catalog (using the Import from Catalog option from the File menu). Let us know if you get stuck anywhere.
Marc

Ssis - move files from one directory to another and rename destination file if present

Hello,
How is it possible to move files from one directory to another directory and if the file already exists in destination directory then rename it?
Thanks

1. Use a foreach loop with file enumerator pointing to first directory.
Inside loop have a ssis variable of type string to get filename (@[User::FileName])
Choose option as Fully Qualified in loop
2. Add another variable called @[User::DestFileName], set EvaluateAsExpression true for it and set expression like this
REPLACE(@[User::FileName],<source directory path>,<destination directory path>)
put actual paths in above expression in your case
and another variable called @[User::RenameFileName], set EvaluateAsExpression true for it and set expression like this
REPLACE(@[User::FileName],".","_old.")
3. Create a boolean variable say @[User::FileEXists]
4. Add a Script Task inside the loop and pass @DestFileName variable in ReadOnly mode and FileExists in ReadWrite mode
Inside Script Task write code as per below
http://blog.dbandbi.com/2013/11/13/check-file-exists-ssis/
5. Add File System Task choose operation as Rename File, Select IsSourcePathVariable as true and select @[user::DestFileName] variable and IsDestinationPath variable as true and select @[user::RenameFileName] variable
6. Choose ExpressionAndConstraint option for precedeence constraint from ScriptTask to above File System Task and choose constraint as OnSuccess and expression as
@FileExists == True
7. Add another File System task with operation as Move File Select IsSourcePathVariable as true and select @[user::FileName] variable and IsDestinationPath variable as true and select @[user::DestFileName] variable. Join Script Task as well as
File System Task above to this task and choose constraint as OnSuccess and Multiple Constraint option as Or (dotted line)
Then once executed it will work as per your requirement
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to move table from one tablespace to other tablespace?

how to move table from one tablespace to other tablespace?

887274 wrote:
how to move table from one tablespace to other tablespace?
alter table <table_name> move tablespace <new_tablespace_name>;
Rebuild the indexes; alter index <index_name> rebuild <new_tablespace_name> online;Example;:
SQL> create table ttt( ID NUMBER PRimary key);
Table created.
SQL> insert into ttt values (1);
1 row created.
SQL> commit;
Commit complete.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME                 STATUS
SYS_C0010863                 VALID
SQL> alter table ttt move tablespace users;
Table altered.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME                 STATUS
SYS_C0010863                 UNUSABLE
SQL> alter index SYS_C0010863 rebuild tablespace users online;
Index altered.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME                 STATUS
SYS_C0010863                 VALID
SQL>

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie

How to move data from a staging table to three entity tables #2

Environment: SQL Server 2008 R2
I have a few questions:
How would I prevent duplicate records, when/ IF SSIS is executed many times?
How would I know that all huge volume of data being loaded in the entity tables?
In reference to "how to move data from a staging table to three entity tables ", since I am loading large volume of data, while using lookup transformation:
which of the merge components is best suited.
How to configure merge component correctly. (screen shot is preferred)
Please refer to the following link
http://social.msdn.microsoft.com/Forums/en-US/5f2128c8-3ddd-4455-9076-05fa1902a62a/how-to-move-data-from-a-staging-table-to-three-entity-tables?forum=sqlintegrationservices

You can use RowCount transformation in the path where you want to capture record details. Then inside rowcount transformation pass a integer variable to get count value inside
the event handler can be configured as below
Inside Execute SQL task add INSERT statement to add rowcount to your audit table
Can you also show me how to Check against destination table using key columns inside a lookup task and insert only non
matched records (No Match output)
This is explained clearly in below link which Arthur posted
http://www.sqlis.com/sqlis/post/Get-all-from-Table-A-that-isnt-in-Table-B.aspx
For large data I would prefer doing this in T-SQL. So what you could do is dump data to staging table and then apply
T-SQL MERGE between tables (or even a combination of INSERT/UPDATE statements)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to move Tablespace from One disk group to another disk group in RAC

Hi All,
I have 11gR2 RAC env on Linux.
As ofnow I have problem with disk group. I have 3 disk group which is almost full - 98%. I have added one NEW disk group and want to move some of the Tablespace(TBS) from OLD disk group to NEW diskgroup and make some free space in OLD disk group.
Can any one suggest me how to move TBS from one disk group to another disk grup without shutting down the instance.
DB is in Noarchive mode.
Thanks...

user12039625 wrote:
Hi Helios,
Thanks for doc id but I am looking for noarchive mode solution. becaues I got ORA-
"ORA-01145: offline immediate disallowed unless media recovery enabled " when run alter database datafile '...' offline.
Hence I am trying something and findout below steps but not sure how useful it is:
1- put tablespace offine
2- Copy the file to new diskgroup using Either RMAN or DBMS_FILE_TRANSFER.
3- Rename the file to point to new location.
4- Recover the file.
5- Bring the file online.
I had move 240M TBS from OLE to NEW.
These steps run successfully so I think this is valid for noarchive mode.Hence want to confirm..so inform me please.
Thanks :)I have doubt in my mind:
1. You database is in noarchivelog mode
2. You're taking tablespace offline
3. Suppose you're moving a file of size 10GB(or any larger filesize) to another disk group
4. Now after moving the file, you're trying to bring the tablespace online............NOW
tablespace will need recovery. if the required data is inside the SGA then it is ok. But if the data has been flushed, then?
if step 2 and 3 has taken significant time, then most probably you'll not be able to bring that tablespace online.
Regards,
S.K.

How to move data from 2 internal table to 1 internal table

Can any body send me code that how to move data from 2 internal table into one internal table.
Moderator message : Read ABAP documentation. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 11:45 AM

Hi Mohdarif92;
I don't know your full needs. But general method should be as below code.
Please check exam below code.
Best regards.
data : begin of gt_result.
            ... like mkpf-...
            ... like mkpf-...
            ... like mseg-...
            ... like mseg-...
          end of gt_result
select *
into table gt_mkpf
from mkpf where ...
select *
into table mseg
from mseg where ...
loop at gt_mkpf.
     loop at gt_mseg where ... = mkpf-...
        move-corresponding gt_mkpf to gt_result.
        move-corresponding gt_mseg to gt_result.
        append gt_result
     endloop.
endloop.

How to move pics from phone to sd card?

Could some one explain how to move pics from phone to sd card?

before you fiddle with it you may want to back up your photos on your PC. This is how to move them from phone to PC.
How to Transfer photos from HTC memory to PC
1) From the phone: select: Menu>settings>connect to pc>as disk
2) Attach phone to pc with usb cable
3) From pc open: Computer>removable disk F>dcim>100media
Note: you can also pull the mini sd card out of you phone and plug that directly into your computer. just make sure to unmount the disk through your settings options before you remove it from the phone.

How to move pics from camera role to photo stream?

How to move pics from camera role to photo stream?

before you fiddle with it you may want to back up your photos on your PC. This is how to move them from phone to PC.
How to Transfer photos from HTC memory to PC
1) From the phone: select: Menu>settings>connect to pc>as disk
2) Attach phone to pc with usb cable
3) From pc open: Computer>removable disk F>dcim>100media
Note: you can also pull the mini sd card out of you phone and plug that directly into your computer. just make sure to unmount the disk through your settings options before you remove it from the phone.

How to move music from PC to Mac

How to move music from PC to Mac

Network
Flashdrive
DVD
External drive
Email
File transfer site
Take your pick. You have several choices. The easiest, if your computers are networked, would be to drag and drop between the computers. Otherwise copying the files to a thumb drive or DVD then taking the thumb drive or DVD to the other computer is probably easiest. Although you could just upload the files to an online file transer site then download them to the other computer.

How to move materials from one sloc to another sloc materials are more tha

Hi,
Can any one help me on this issue How to move materials from one sloc to another sloc materials are more than 1000
and from existing sloc to new sloc which is Hum managened i need help onthis issue thanks

hi
use T-code: MB1B Transfer Posting
Movement type:
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators: E, K, M, Q
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
Possible special stock indicators: None

How to move value from one tlist to another tlist in same form?

how to move value from one tlist to another tlist in same form on button press?
Same like in data block wizard when we select value from 1st list it will go to 2nd list and can be move back. Please help i am new to forms .
Regards

just call the following proc in your add & add all buttons. Reverse the code for REMOVEs
this proc will move one item at a time from list_item1 to list_item2.
PROCEDURE add_an_item
IS
v_list_count    NUMBER;
v_item1_label VARCHAR2(60);
BEGIN
IF :list_item1 IS NOT NULL THEN v_list_count := nvl(Get_List_Element_Count('list_item1'),0);
      IF v_list_count >= 1 THEN FOR i IN 1..v_list_count
      LOOP
         IF   :list_item1    = Get_List_Element_Value('list_item1', i)
         THEN
              v_item1_label := Get_List_Element_label('list_item1', i);
              Add_List_Element('list_item2',1,v_item_label,:list_item1);
           Delete_List_Element('list_item1',i);
           Exit;
         END IF;
      END LOOP;
       END IF;
   END IF;
END;
*********************************************************************************this proc will move all items from list_item1 to list_item2.
PROCEDURE add_all_items
IS
v_list_count NUMBER;
v_item_label VARCHAR2(60);
v_item_value VARCHAR2(60);
BEGIN
v_list_count := nvl(Get_List_Element_Count('list_item1'),0);
IF    v_list_count = 1 AND Get_List_Element_Value('list_item1', 1) IS NULL THEN NULL;
ELSIF v_list_count >= 1 THEN
       FOR i IN 1..v_list_count
       LOOP
        v_item_value := Get_List_Element_Value('list_item1', i);
        v_item_label := Get_List_Element_label('list_item1', i);
        Add_List_Element('list_item2',i,v_item_label,v_item_value);
       END LOOP;
       clear_list('list_item1');
END IF;
END;I added [ code ] tags to make this easier to read.
Message was edited by:
Jan Carlin

Low On Space - How to Move Apps from phone to SD Card

Yes, I have a Pantech Breakout and I'm having a little problem with it, It shows under my Storage settings with Total Space stating 7.50GB, Available space 7.16GB and Internal space 42.19MB. Now when I go to my Storage settings under Application settings where All is highlighted is shows on bottom of phone Internal Storage 297MB used and 49MB free, when I select On SD Card it shows on bottom of phone 3.55MB used and 7.2GB free. My problem is this I recently downloaded an app right and after I downloaded the app I received a Message telling me this: Low on Space...Phone Storage is getting low please move applications from phone to SD card to secure enough space. Ok, I just don't know how to move applications from phone to SD card.
Thanks in advance :-)

Clear the cache. Menu > settings > Applications > manage applications > all tab > menu button > sort by size
Go through each application one by one and press the "clear cache" button.
Uninstall any application you don't need on the phone. Sorry the pre-installed applications can't be removed.
If an application has an option "move to SD card" you can press it to move the app to the SD card. Be aware that any application with a widget stored on the SD card will not be able to use the widget.
I would also check the size of your email application and if large, deleted any old emails from the trash. An easy way is to remove the email account, reboot the phone and then add the account back onto the phone.
Text messages are another storage hog. I would suggest getting a SMS backup or full text message (SMS & MMS) backup application to backup your messages. Then you can safely delete your messages and clear up some space.

How to move music from ipad to sdcard

Hi any idea how to move music from ipad to and sdcard without any jailbreaking?
Thank you.

It is a one way process except for iTunes purchased tracks. For other tracks, and assuming the new computer in a PC use this: http://www.wideanglesoftware.com/touchcopy/index.php
If you are buying a Mac, I prefer this: http://www.ecamm.com/mac/phoneview/

How to move WordPress from (/blog/) directory to main directory (domain)

Similar Messages

Maybe you are looking for