How to mute ALL audio in one single go in an edited multicam clip?

Hi there
I'm having to replace some audio in an already edited multicam clip. (there are mulitple audio parts I'm replacing by the way)
How can I mute ALL of the audio in one go, as I have about 400 cuts and am currently having to mute one by one per cut.
thanks

Easy. Select them all. In the inspector, click the Audio tab. Under "Channel configuration", uncheck the box which would say something like "400 selected clips".

Similar Messages

My volume key not working volume increase automatically, how to mute all audio

my volume key not working, volume increase automatically if i go to audio settings i can adjust, but again volume increase automatically , how to mute all audio

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comeback again?
If this does not boring back a working volume control, and to rule out a software issue, set it up as new device, explained here:
Use iTunes to restore your iOS device to factory settings - Apple Support
If still no luck, you'll have to get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
iPhone - Contact Support - Apple Support

How to delete all mails with one klick?

It's annoying to delete every single mail.
How to delete all mails with one klick, like in the paperbasket?
Thanks

If the emails have been previously deleted (I.e. in the trash folder), tap Edit at the top of the list. You should see a delete all button at the bottom. If the messages are in a standard folder, they need to be handled one at a time.

How to bring all columns in a single/first page in report painter

Hi Experts,
There are 9 columns in a report painter which includes 1 lead column.
7 columns comes in a first page including lead column and rest 2 columns goes to second page. This report is copied from another report where all columns comes in a first page only. if the original report comes in one page then why not the new report.
Please suggest how to bring all columns in a single/first page in the new report.
Please revert if I'm confused anywhere.
Thanks in advance
Arabinda

Hi Rajneesh,
Thanx for the quick reply. When I change the column width to 10 it comes in one page. But the requirement is to keep the column width to at least 12 or 14 and moreever the original report from where this report is copied having the same no of columns and the column width for original report is 14 and it comes in one page only.
Do I need to do something more to achieve this. My question is how the original reports data comes in one page where as the current report having issue with same number of columns.
Pls suggest.
Thanx,
Arabinda

AIR for mobile mutes all audio on phone ring

I know this is documented in the Adobe documention that an incoming phone call will mute all audio being played(Sound object or NetStream). The one problem I have with this is and that is they provide NO means of knowing when this event occurs that I am aware of. I tried to be clever and listen for volume changes to the SoundMixer class using an EnterFrame but that didnt change anything. Is there any way to know when a phone call is happening so that you can pause your audio/video source instead of it being muted and continues to play in the background? At the moment, the only thing I can think of that I will need to create a native extension to detect incoming calls.

I actually eventually created a native extension for Android(sorry iOS devs, I dont have an iPhone or an extra $100 a year to spare) to let you know when a phone call happens so you can pause your audio/video source and resume it when the phone call is over. I was intending to sell it eventually but Im willing to share it a few people to get feedback as long as they agree to not give it out. Let's say the first 3 people to reply to this post, I will give the ANE to. If there is a PM option that Im just completely overlooking, that would be preferable so people arent having to put their email address out there if they dont want to (but you can always delete your post afterwards if you wanted).

How to print all columns in one page

Hi,
Can anybody explain me how to print all columns in one page.we have around 15 to 20 columns for 4 reports and all these reports are build on one multiprovider.we are using BW 3.5.
Can anyone explain me how to print ALL COLUMNS IN ONE PAGE .currently they are getting all columns in 2 to 3 pages. They are using PORTAL to run the reports here.
Is it possible to do by customizing Webtemplate or by macros in Workbook.Please help me
Edited by: kotha123 on Oct 11, 2010 5:58 PM

Hi,
Your best bet is to use a workbook template or else Excel to pdf option...Thanks

How to divide all textFrames in one-character-per-textFrame?

Hello:
How to divide all textFrames in one-character-per-textFrame?
Example: the textFrame "Letters" will be divided in 7 textFrames: "L", "e", "t", "t", "e", "r", "s".
Help, please.

Hi Paul, try this one
#target Illustrator
// script.name = splitSelectedFramesIntoWords2.0.jsx;
// script.description = splits selected texFrames into separate words;
// script.required = select point text textFrames before running;
// script.parent = CarlosCanto; // 10/14/11
// script.elegant = false;
var idoc = app.activeDocument;
var sel = idoc.selection; // get selection
var selCount = sel.length; // count items
var tFrames = []; // to hold the textFrames
for (j=selCount ; j>0 ; j--) // loop thru selection & get textFrames backwards
                    tFrames[j-1] = sel[j-1];
for (k = 0 ; k<tFrames.length ; k++) // loop thru textFrames
                    var xpos = tFrames[k].position[0]; // get x
                    var ypos = tFrames[k].position[1]; // get y
                    var words = tFrames[k].contents.split(/\s/g); // get all words into an array
                    //$.writeln(words);
                    var space = tFrames[k].duplicate(); // dup to get width of a space
                    space.contents = " ";
                    var sw = space.width;
                    space.contents = words[0]; // replace space with first word
                    var w = space.width;
                    var wordCount = words.length; // count words
                    for (i=1; i<wordCount ; i++) // loop thru words
                                        xpos2 = xpos+w+sw; // next words position = previous word pos+width+space
                                        var iword = space.duplicate(); // duplicate previous word
                                        iword.contents = words[i]; // add next word
                                        iword.position = [xpos2,ypos]; // position the character = original position + new width
                                        w = iword.width; // get words width
                                        xpos = iword.position[0]; // get words position
                    tFrames[k].remove(); // remove textFrame

Can I mute all audio from Final Cut Pro X?

Can I mute all audio from Final Cut Pro X so that I can listen to music while I do sorting, keywording, favoriting, etc? I'm doing a video where all the camera audio won't be used anyways, so I don't need to hear it in FCPX.. I'd rather just listen to my music instead. Thanks.

For clips in the timeline, andynick's suggestion works fine - temporarily disable the audio roles will play everything without audio and you just have to reenable these roles later.
For clips in the Event Browser, you can also disable and reenable audio for a bunch of clips all at once. Select the all the clips you want, open the inspector, click the audio tab and uncheck the box (for "stereo" or "mono" or whatnot) under "Channel Configuration". Again, to reenable just check this box again.

How to transfer all materials from one plant to other plants?

How to transfer all materials from one plant to other plants?

Hi
To transfer stock in one step between plants belonging to same company code use movement type "301" and using transaction code "MIGO". IF you like in two step it helps to monitor stock in transit use movement type "303" and "305".
303 Transfer posting plant to plant in two steps - removal from storage
305 Transfer posting plant to plant in two steps - placement in storage
to transfer stock between plants of diffrent company code go for stock transpor order using tcode "me21n"
hope it helps

Multiple devices on same account - how to transfer ALL files in one place?

Hi,
I am using my Apple ID on 5 apple devices, incl. 2 laptops and Mac. Need to migrate all files to one computer for syncing with iPhone and cut out some devices, but...
Question 1: How I can move ALL my music files from old MB Pro (runs Mac OS X 10.5.8) with iTunes 10 to Mac (runs Mac OS X 10.9.2) with iTunes 11.1.5?
Note, this includes songs purchased outside of iTunes and burnt from CDs. Is it possible to somehow easily identify the songs that are missing on Mac and copy just them from the old computer, but without manually comparing? For now for whatever reason Mac only has 401 songs vs my old MB Pro has 1670+ songs. So, please suggest how to make the import on the missing songs to Mac as efficient as possible.
Question 2: How do I deauthorize the device once I copy my old music to Mac? Currently only see the button "Deathorize All" in iTunes on Mac. What if I want to choose which computers I still want to be able to stay on the same Apple ID in iTunes?
Thanks a lot!!

Decide which Mac is your primary. On the Mac that is not the primary - create a folder on the desktop - drag all the tunes from iTunes into that folder - copy that folder to an ext HD or a memory stick.
Plug into the primary Mac and tell iTunes to import all the tunes from the folder.
iTunes has good sort options so it won't take long to get rid of the duplicates using the Show Duplicates from the View dropdown menu.
An alternative would be to check at http://dougscripts.com/itunes/ and see if there is a script that will take care of what you want.
MJ

How to delete all HU in one storage type

Dear experts I did use the /SCWM/ISU for uploading of the stock but now I need to change something in the structure of the storage bins.
I cannot change anything, because the bins are having HU already. Could someone give me a tipp how I can delete all HUs from one specific storage type?
Thanks in advance
BR
Denis

Hi Denis,
If the HUs are empty then the above solutions as Pet and Ifran mentioned should work for you. Else, if you have stock in the HUs then you need to scrap the stock, you can do this using /n/scwm/adgi look up the HUs then scrap them. This will empty the bins.
Thanks,
Faical

How to get all songs on one album artwork

I have 1 album that is listed twice on the albums list. I have 2 songs on one and one song on the other. I cannot get them all on just one. I have checked all the info on the info tab and everything is the same. I have copied all the songs in one file on my desktop and deleted everything from itunes and my music folder and when I add it back to that artist it adds two. The only thing that is different is one song was downloaded on itunes and the other 2 were from a CD.
selected all the songs and when to get info and retyped the name of the artist and the artist album and fixed it like blood sugar sex magik.

how about the less painful click the first song then shift-click the last song?

How can i leave audio from one clip playing, while showing another one in i

i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
[See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

How to save multiple tables on one single save button in JDeveloper.

hi all,
i have two tables on a JSF page.
the parent and child tables has 1 to many relationship.
its like for department id i have many employee_id's.
in my scenario ,
i have to give values to both parent and child tables at a time on one single click on add button. and after clicking on one single save button i should be able to commit the data into database for both the tables at a time.
its similar like a hire a person in fusion applications , when you clinked on hire person. all the related tables populated to give data and on one single save committing data to database.
please help in this. and its my urgent requirement for my application design.
am beginner to the J Developer Tool and ADF.
regards,
M vijayalakshmi.

I assume you are using ADF BC as your business components. Now if both your Master and Chail VO are instances of the same AM, the commit operation of the AM will take care of it. You just have to drag and drop the commit operation as a Save button in your page

How to get all JFrames in one window.

I have a JFrame with menu system. When the user opens a file using the menus and filechoosers,another JFrame is called wherein the required output is displayed. If another file is chosen,the data of the previous file is not cleared from the runtime memory. What additional statement is needed to debug this program?
Also on clicking the second menu and the menuitems therein,each JFrame instance is created with the required outputs. How to make all these JFrame instances in a single window? I tried the JDesktopPane but with no success.

JFileChooser jfc = new JFileChooser();
JMenuBar jmb = new JMenuBar();
JMenu jm1 = new JMenu("File");
JMenu jm2 = new JMenu("Plot");
JMenuItem jmi1 = new JMenuItem("Open Alt+O",new ImageIcon("Open.gif"));
JMenuItem jmi2 = new JMenuItem("Exit");
JMenuItem jmi3 = new JMenuItem("Graph");
public void actionPerformed(ActionEvent ae){
     if (ae.getSource()==jmi1){
          int result = jfc.showOpenDialog(null);
          File file = jfc.getSelectedFile();
          String ftr = file.toString();
          System.out.println("The file selected is "+ftr);
          ftr.trim();
          if (result == JFileChooser.APPROVE_OPTION){
               try{
                    RandomAccessFile raf = new RandomAccessFile(ftr,"r");
                    long l = 0;
                    while (l < raf.length()){
                         String str = raf.readLine().toString();
                         l = raf.getFilePointer();
               jm2.setEnabled(true);
               frame("Frame");
               raf.close();
          }catch (Exception e){
               System.out.println("Exception caught is "+e.toString());
     }else if (result == JFileChooser.CANCEL_OPTION){
          jfc.cancelSelection();
     }else if (ae.getSource()== jmi2){
          System.exit(0);
     }else if (ae.getSource()== jmi3){
          graph("Graph");
static void frame(String title){
     JFrame frame = new JFrame(title);
     frame.getContentPane().add(new GraphPanel(), BorderLayout.CENTER);
     frame.setDefaultCloseOperation(2);
     frame.pack();
     frame.setVisible(true);
static void graph(String title){
     JFrame frame = new JFrame(title);
     frame.getContentPane().add(new Graph(), BorderLayout.CENTER);
     frame.setDefaultCloseOperation(2);
     frame.pack();
     frame.setVisible(true);
Whre should I use frame.setVisible(false); and frame.dispose();

How to mute ALL audio in one single go in an edited multicam clip?

Similar Messages

Maybe you are looking for