How to mute guitar sound ?

Hi everyone,
I have a problem, i just received my new monitors Yamaha HS 80, and when i plug in my guitar into Mic input or Line in, i can hear the guitar sound in high volume even if i didn't opened Pro Tools and even if the main volume is low. I want to use my Guitar Rig 4 in pro tools and not to hear the "direct" clean sound in the monitors
Thank you for the help

Turn the Mix button at max

Similar Messages

How to mute camera sound in n82

Hi
can you please tell me how to mute camera sound in n82

11-Sep-2008 10:13 AM
sarawirda wrote:
Yes, I agree but sometimes in certain situation, i need it to be mute, like when to snap picture in some quite place. I tried off the warning tones but the n82 camera sound still can be heard.
In that case I'm afraid you're out of luck. Your N82 was obviously intended for a region where the camera must make a noise.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Just got fcp, how do mute the sound on the video clip so it does not come through the audio track?

just got fcp, how do mute the sound on the video clip so it does not come through the audio track?
Please help

Don't edit the audio into the timeline. Or pull the audio level down to zero in the inspector or on the audio waveform in the timeline.

How to mute incomming sound from all callers when ...

We sometimes transmit a meeting for worship to sick ones who dial in to listen. If they don't remember (or don't know how to) mute their microphones we get feedback through the PA because the laptop headphone socket is fed into the PA to play music.
Is there a button I've not yet seen in Skype that will "Mute all incomming sound from callers"?

I've never tried this but I think its what you are after.
On the skype menu, go to Tools and then Options
Select Sounds
The is an option to Mute all sounds - this should stop any incoming sound including erroneous cam and mic audio from all callers and I think will allow your outgoing sound to transmit ok.

How to mute camera sound??

i have iphone 4 ios7, i can't mute my camera sound but i've been switch the silent button. heelp me

Laws in some countries don't allow silent phone cameras to discourage surreptitious photography. iPhones sold in those countries will not silence the camera.
You may be able to reduce its volume via
Settings > Sounds > RINGER AND ALERTS

How to mute startup sound? (iMac, OS 10.8)

Ever since I've upgraded to Mountain Lion, the startup sound came back.
I am using an iMac so you clearly didn't read this post if you're suggesting the Silent Ninja application. I've even tried it myself, and it doesn't work.
The Arcana is what I used to use with Snow Leopard and seems it's incompatible with 10.8.

If you use the iMac's built-in speakers for sound when using the iMac, the startup sound reflects the volume setting for the built-in speakers.
If you use headphones or external speakers connected to the headphones port on the iMac, that volume setting is stored separately (from the built-in speakers). To mute the startup sound, disconnect anything in the headphones port, so that the iMac is using the built-in speakers. Set the volume to mute.
You can now reconnect the headphones or external speakers, and the volume level should go back to normal, but the setting for the built-in speakers has been set to mute and it is retained. When you startup, the startup sound should be muted.

How Do I Get This Guitar Sound

How do I get this guitar sound? What effects is he using? Can I get it with Garage Bands sounds??
Paul W.
http://www.youtube.com/watch?v=E5sJVXXYVPA

I'm no guitar expert my any means, but I'm pretty sure that's some sort of reverb pedal, along with using a whammy bar or bending the strings. Just add the reverb pedal to your amp set up, or adjust the reverb setting on the amp.

How to mute sound of screen capture

I use screen capture on my Nokia X by press Power + Volume down button , I need to disable sound of screen capture
Please advise How to mute sound of screen capture.

No, there is no existing way in your phone to disable sound of screen capture. Even turning on silent mode, does not make sound off.
A past Nokia X user, now a X user.

How to get this guitar sound

http://www.youtube.com/watch?v=2C0F7eFxhXM&t=1m23s
There is a guitar in the background panned left just playing notes, not chords, and Im just curious if anyone has any idea how to best try and get this guitar sound in Logic? Probably a shot in the dark here but I cant seem to figure out how to get even close to it on my own. Not a logic pro user at all.

You'll improve as an engineer by following a few steps. Don't start with a Logic issue, start with an engineering issue and then you'll get how best to solve it with what you have.
Firstly, what makes this sound? How is it made and how do you think it was recorded? To me, this sounds like a humbucker pickup so I'd guess a les Paul or maybe an SG type of guitar going into maybe a Marshall or an Orange type of amp. This is not a DI'ed sound so you're going to have trouble here if you only have DI's.
To me this sounds like a ribbon mic, pretty closely mice'd, maybe paired with a 57 or sen 906, something like that. And it's mainly just HIM playing. Great sound, good player. Never underestimate this.
Now we have the internet so lets look him up and see if we can track down what he uses or used on this record.
OK, looks like he used a custom Ibanez AX-120 with a Seymour Duncan JB Jnr pickup, so it is a high output humbucker and it also looks like he went through an Orange stack.
If you can get hold of a guitar with a humbucker at the bridge, you'll be making the first positive steps. You don't mention what gear, if any, that you have only what software. Again, if you can get hold of a hi-gain amp and a couple of mics you're going to a lot closer in terms of gear, and hence sound.
I see Guitar Rig has the 'Citrus' amp, so if you can't get your hands on a real amp, maybe start here. Don't be shy with the gain but again, try to restrain yourself a little.
I think your main enemies here are that this record is very live and most of the sound is dialled in to the amp plus the choice of mics. So try to use a matching cab to the citrus amp and choose a ribbon mic in Guitar Rig, I'm sure there's at least one in there.
Finally of course, it's the way he plays it too. Good luck with that.
In summing up, always approach these things from an engineering point of view. What is it? What makes it what it is? This will take you a good way to where you want to be and make you a better engineer. After that, solving your issue with Logic will be simpler because you've gotten so much closer with your approach. This comes with time, and I mean years.
Hope this helps.

How do i mute all sounds except alarm

I want to mute all sounds and alerts except for my alarm so I don't get bothered by sounds all night long. How do I do that?

To switch between ring and silent mode: Flip the Ring/Silent switch on the side of iPhone. When set to silent, iPhone doesn’t play any ring, alert, or effects sounds. It does,however, play alarms set using Clock.

How to make a "wah" lead guitar sound less shrill?

Hi all, so I have this song with the following, all on seperate tracks: Drums, Bass, Distorted Rhythm Electric Guitar, and Distorted Lead Electric on a Crybaby Wah Pedal.
I'm happy with everything except the Lead Guitar track. The wah makes it sound shrill, ear-splittingly so. I recorded by sticking a mic in front of the guitar amp (me using headphones).
I've fiddled with a it a bit, and but can't really find a way to "warm up" the sound of that lead guitar.
I'll attach an mp3 if anyone wants to hear it.
Any suggestions?

Since I'm bored...
Here are some graphs just to give you an idea of how crazy some guitar pedals are and how much they filter the audio....
The first one (MT-2 AC (Un-modified - Full gain).jpg) is a graph of an unmodified pedal. Notice the peaks and how drastic it changes the sound...
The second one (MT-2 (Modified - Full gain).jpg) is a graph of a modified pedal that eliminates the three fixed boost circuits but allows the 3 tone controls to still function...
The modified pedal does less to the audio and allows the person (or persons) mixing the sound to control where those peaks will be and how much gain there will be...
Erg... Have to go now...

TS3698 When using amps no guitar sound feedback external sounds

I'm using the GarageBand app in my iPhone 5s OS 7.
I am using the PV AmpKit Link as an interface between my guitar and the app.
When I turn the amp monitor on there is loud high-pitched feedback, but there's also sound coming from my room
as if there is some internal mic switch on. This of course would account for the feedback but I don't see anywhere to cut the mic.
In addition my iPod or Siri will open on their own and I have to turn them off and return to the GarageBand app.
Up until a few days ago everything was working fine.
Anyone have any ideas on this?

Are you sure that all other sounds are working?
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twa

I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twangy electric or the distorted strat but i only hear clean sounds. No matter what kind of guitar sound i chose in the library it only produces clean guitar. How can i make it sound like it supposed to? Did i miss something i should do?

This definitely has me stumped as I'm unsure as to why your guitar can be heard, but with none of the channel strips plugins applied to the sound.
On the record enabled channel strip that contains your guitar input, is the "I" button located near the "R" active? Also, if you record your guitar, can you hear the FX applied to it when you play back the recorded track?

HT201401 Do you know how to get my sound to work on my iphone4s, i have no sound from siri,or ringers,or music

DO ANYONE KNOW HOW TO GET THE SOUND WORKING ON MY IPHONE 4S ? I HAVE NO SOUND ON MY RINGERS,SIRI OR MUSIC.

Use your side control and make sure it's not on mute. Flip the switch to up and turn up the volume.

How do I get sound to work for games...?

How do I get sound to work for game apps, when I have sound for other items on ipad2?

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

How to mute guitar sound ?

Similar Messages

Maybe you are looking for