How to mute volume in i pad
how to mute volume in ipad
Double-click the Home button and swipe the Task Bar to the right and you should see the Mute button on the extreme left.
http://i1224.photobucket.com/albums/ee374/Diavonex/483d92b97f0d7a796d2174a40c564 9e9.jpg
Similar Messages
-
I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x? -
My volume key not working volume increase automatically, how to mute all audio
my volume key not working, volume increase automatically if i go to audio settings i can adjust, but again volume increase automatically , how to mute all audio
Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comeback again?
If this does not boring back a working volume control, and to rule out a software issue, set it up as new device, explained here:
Use iTunes to restore your iOS device to factory settings - Apple Support
If still no luck, you'll have to get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
iPhone - Contact Support - Apple Support -
How do I get my I-pad Air to not make a "doonk" sound when charging?
How do I get my I-pad Air to not make a "doonk" sound when charging?
Actually, you can turn the sound off by muting system sounds. Read this.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
How to adjust volume on Audio Timelines
A couple questions about volume adjustment on the various Audio Timelines on Premiere Pro CS 5.
1) How to adjust volume level of an mp3 on the Audio 2 timeline?
2) How to adjust or mute volume of an 'individual' video clip on the Video 1 and Audio 1 timeline? (I have many clips on the timeline and know how to mute them all, but in this case, I'm looking to only mute certain clips in the timeline.)Along with the material covered in the Help File, that Ann linked to, see this ARTICLE. It goes into a little more detail on the differences between Clip Keyframes and Track Keyframes (generated with Audio Mixer). While the effect of those can be the same, there are nuances, that one should make note of.
Good luck,
Hunt -
How to mute sound of screen capture
I use screen capture on my Nokia X by press Power + Volume down button , I need to disable sound of screen capture
Please advise How to mute sound of screen capture.No, there is no existing way in your phone to disable sound of screen capture. Even turning on silent mode, does not make sound off.
A past Nokia X user, now a X user. -
How to mute selected region of a clip?
I know how to control volume of entire clip... But how to mute selected region of a clip?
Also I'm curious if iMovie'08 has some kind of audio frequency filter? My cam recorded it's lcd's whisltle sound. Is there a way to reduce it?To mute a selected region of a clip in a project:
Select the region you want to mute by dragging the cursor while holding down the left mouse button. You should have a yellow rubber band around the portion you want to mute. You can adjust this further by grabbing the handles on either side of the yellow rubber band.
Now, select Edit/Split Clip. Your one clip should have become three clips. Select the one that you want to mute. Click the audio icon and set the volume to zero.
No way I know of to reduce the whistle within iMovie. You can share your movie and open it up in a Garageband project. There, you can do editing on the audio track with all the GarageBand Tools. -
In my MacBook Pro old 2006 late model Lion 10.7.4 how achieve right click from touch pad?
The multigesture buttonless trackpad was introduced with the Unibody Macs that came out in Late 2008. Successive models have built upon that, adding 2, 3 and more fingers to the gestures.
Older models don't have the trackpad hardware needed to detect those motions and, hence, cannot support multigestures. Only resort is using combination of keys with the button, as disguise suggests. -
How do I connect my I pad to a Sony Bravia TV so that I can watch live tv on it
How do I connect my I pad to Sony Bravia TV so that I can watch content , streamed tv on it
Hey wrend123,
You can use AirPlay Mirroring to mirror exactly what’s on your iPad to your HDTV via Apple TV. You can read more about that option here:
iOS: Use AirPlay Mirroring
http://support.apple.com/kb/HT5209
You can also use TV out, which you can learn about here:
iPhone, iPad, iPod: TV out support
http://support.apple.com/kb/HT1454
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
How to mute and lock screen rotation at the same time? Loved this feature in iOS 5.
How to mute and lock screen rotation at the same time? Loved this feature in iOS 5.
You cannot do two different simultaneous VISA writes over a serial bus. There is a single rx line on the pc's com port and a single rx line on the instrument. You only hope is if the instrument allows you to chain commands and the reception of the carriage return triggers the instrument to implement both at the same time. Maybe you can send CTS01 and CTS02 separated by a space or comma. The manual should tell you if that's possible or maybe you need to ask the manufacturer.
-
How to mute camera sound in n82
Hi
can you please tell me how to mute camera sound in n8211-Sep-2008 10:13 AM
sarawirda wrote:
Yes, I agree but sometimes in certain situation, i need it to be mute, like when to snap picture in some quite place. I tried off the warning tones but the n82 camera sound still can be heard.
In that case I'm afraid you're out of luck. Your N82 was obviously intended for a region where the camera must make a noise.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
How can i connect my I pad 2 to big screen TV to vatch movies?
How can i connect my I pad 2 to big screen TV to watch movies?
You can get the Apple Digital AV adaptor:
http://store.apple.com/us/product/MC953ZM/A
Or, you can buy an Apple TV and send video to the TV via Airplay:
http://store.apple.com/us/browse/home/shop_ipod/family/apple_tv -
How can i connect my i-pad to my tv ?
please can you help , I need to know how can i connect my i-pad to my tv ?
thank youYou can also use the Apple Digital AV Adapter
http://store.apple.com/sg/product/MD098ZM/A/apple-digital-av-adapter
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/45a1b4975bb98ed3b80 312e111ddecf8.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/6b8a0b356bfb943a782 8e60beadaf0e4.jpg -
How i will connect my i pad to my personal laptop for syncing my own data?
how i will connect my i pad to my personal laptop for syncing my own data?
Sync iPad with computer
Each time you sync, your content updates between your iOS device and computer to show new, updated, or deleted content. You can change your sync options at any time.
Syncing with iTune
http://support.apple.com/kb/HT1386 -
How do I connect my I pad to a projector
How di I connect my I pad to a projector
Try https://discussions.apple.com/thread/2397882?start=0&tstart=0
Allan
Maybe you are looking for
-
TS4124 i am loosing all my songs on itunes and i have itunes match
i am loosing all of my songs on itunes and i have itunes match
-
Cost Element with Cost center in column in one report
Hello experts, Kindly, can you help me to create a report where I can see for each cost center all the cost element balance related. B. R F Tay
-
Hi Experts, i have created a TCP/IP connection in sm59 as ID4 with R/3 details. now i am calling a function module like this. call function 'Z_CBT_RFC_SALESPERSON' exporting p_sdate = p_sdate p_edate
-
Interrupting Keynote 3 with Front Row
When I interrupt a slide with Front Row to play a song, I get the desktop back afterwards rather than the slide I interrupted. I have to manually click on the Keynote icon to get back to my slide. Is this the intended behavior? It would be really nic
-
Error Importing Business Package for Projects 50.3.1
Hey all We are trying to import and use Business Package for Project 50.3.1. Our backend system is R3 4.6C. We are getting an error while importing the package. I am pasting the dump i received. If anyone can put some light on it then please do so. C