How to Naviagate from one screen to another screen in VA01 trough code

Hi,
I am creating a sale order in Va01 after populating all the fields in the screen like purchase org ,material and filling all the relevent tab in the second screen i am going an saving the screen value , The user requiremnt is such a way that when you go an save i want the screen additional data b to be displayed so that i can enter the value and save again.
the additional data tab is go to item more tab funtction and additional data b.
is there any way on save i can call this screen as per the user requirement.
Thanks
Ravi

http://sap.rutgers.edu/sap.pdf
and also you can use screen exit for the same

Similar Messages

  • HOW TO MOVE FROM ONE JSP TO ANOTHER BY HIDING URL CHANGES

    HOW TO MOVE FROM ONE JSP TO ANOTHER BY HIDING URL CHANGES IN AN ADDRESS BAR

    Please check before posting that you have not accidentally turned on the CAPS LOCK feature of your keyboard.
    To answer your question. You can't do that. There are alterate ways to solve this sort of problem. What exactly is the nature of the problem you are seeking to solve?

  • How to skip from one list to another list in interactive report?

    Hi Friends,
    How to skip from one list to another list in interactive report that means now i am in 7 th list how to skip 4th list ?
    Or  now i am in 7 th list how to skip 9th list ?
    can anybody send sample code please.
    Thanks in advance.

    hi,
    at line-selection.
    case sy-lsind.
    when 9.
    sylsind = 4.
    endcase.
    try like this when u r in 9th list next it goes to 4 th list

  • How GroupArt remove from one layer to another.

    hi all,
    How GroupArt move from one layer to another.
    Thanks in advance.

    Hi Vijay,
    1) To add new events you have to define a custom action, e.g. under the settings of a button you can choose custom action and define a name for this action
    2) You have to add a custom action, e.g. "next" then you must connect the two layers (drag a line from one layer to the other) and change the event name into "next"
    3) you can pass data from one layer to another like you do it from a form into a rfc/query and so on
    There is also a tutorila available in the help:
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/04/80aab03df044ec995000842e77e1be/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/04/80aab03df044ec995000842e77e1be/frameset.htm</a>
    The bank example shows you how to use layers as a wizzard.
    Best Regards,
    Marcel

  • How load data from One Infoobject to Another Infoobject?

    Hi GuRUS
    Any body has succeded in loading data from One Infoobject to Another Infoobject?
    Pls Let me kNow
    Regards
    Durai

    Hi Durai,
    Create export datasource on the info-object and then load the data to the other info-object.
    Check this link also:
    Re: How load data from Infoobject to another Infoobject?
    Bye
    Dinesh

  • How move apex from one server to another

    Hi All,
    I am just a beginner who has just started with APEX. Its strange but even though I am just a beginner I was given a task to move the current whole apex system from one server to another.
    Can any one help what the steps do I need to follow to do this?
    I also need to setup backup server to this new server so that in case this new server goes down, the backup one can be made productional.
    I think I should move apex first then move the whole database. Is there any tool or some thing which can do it for me?
    Thanks

    Hi,
    what you are being asked to do would be a complex task for an experienced DBA, which, judging by the way you have asked the questions, you are not, no offence intended.
    As far as I can see you have three options.
    1. Hire a consultant/contractor with the necessary skills to perform the tasks.
    2. Gain several years experience as an Oracle DBA, including Apex, backup and recovery and disaster recovery skills.
    3. Look for a new job.
    Sorry to sound facetious, but it is a ridiculous task you have been given assuming the skill and knowledge level you are coming from. Assuming you have not misrepresented yourself to your employer, this is not your fault and I think you need to seriously push back on your boss if possible.
    Regards
    Andre

  • How to copy from one Version to Another version with single click

    Hi Everone,
    Users wants to copy from one version to another version with single click only. I.e Actuals to Planning etc.,
    They don't want use standard COPY Data manager package to do this activity as this involves many steps.
    Please let me know Is there any way to COPY with single click. Thanks in advance!!
    Regards,
    Viswanath

    Hi Viswanath,
    Use /CPMB/DEFAULT_FORMULAS
    Then edit automatically created advanced script:
    PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%,%CURRENCY_DIM%,%TIME_DIM%")
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SELECTION,%SELECTION%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,DEFAULT.LGF)
    Remove bold lines and change the script name in line with your script name:
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,YOURLOGICNAME.LGF)
    Vadim

  • How to EXTRACT from one PHOTO to another

    How do I extract from one photo and place in another using PSE 19
    Message title was edited by: Brett N

    You probably mean PSE10 ---Typo?
    Use one of the selection tools, e.g. selection brush, lasso tool, to select the object on picture A.
    Go to Edit>copy to put it on the clipboard
    Open picture B
    Go to Edit>paste. A will be on its own layer
    Access the move tool to position A and to resize with the corner handles of the bounding box

  • HOW: Copy Routings from One Org to Another

    Dear All,
    Is there a way to copy Routings from One Org to all the Orgs in one shot. I mean do we have any program/ process which can be used to do this.
    We dont want to go in individual Routings and Copy others onto it from Tools Menu.
    Regards
    Vir

    Hi Vir,
    Open routing screen with organization = < org. in which you want to copy the new routing >
    Input item (assembly item) for which you want create a routing and press <TAB> key.
    Navigate thru following flow.
    MENU > TOOLS > COPY ROUTING FROM
    Input org. from which you want to copy the routing.
    Input item from which you want to copy the routing.
    Select Copy button.
    HTH
    sanjay

  • How send contacts from one group to another

    I have 2 groups ; iCloud and contacts from PC in my iPad. How do I copy contact from one group to another

    Hi,
    what you are being asked to do would be a complex task for an experienced DBA, which, judging by the way you have asked the questions, you are not, no offence intended.
    As far as I can see you have three options.
    1. Hire a consultant/contractor with the necessary skills to perform the tasks.
    2. Gain several years experience as an Oracle DBA, including Apex, backup and recovery and disaster recovery skills.
    3. Look for a new job.
    Sorry to sound facetious, but it is a ridiculous task you have been given assuming the skill and knowledge level you are coming from. Assuming you have not misrepresented yourself to your employer, this is not your fault and I think you need to seriously push back on your boss if possible.
    Regards
    Andre

  • How to move from one page to another page

    hi all
    we have a report,in that if i click on user name he has to go to another page,
    in that page i have created one prompt and one report ,there he has to select groups(prompt) and in that page only he has to see the report
    how to provide like to page, when user clicks on user_name in the report (can we make it out navigation option in column property?)
    thanks

    hi kishore
    now i got the point ,now it is working ,
    what i did is ,i have created two pages
    page1 contains ,user_name as a prompt and one report (in this report i have given column format-->navigate to another page for the first column)
    in page2 i have created one more prompt on group_name and a report (is prompt option i have given bez when use clicks on page1 report column based on that it has to display the report)
    here my problem is,wen i returns from page2 to page1 and again i try to apply filter on the report it is not happening ,it is showing the report with old filters
    (i have again selected the value from prompt and i clicked on go button,it is not applying any filter on the report it is showing the report with older filters)
    What is the problem
    thanks
    sreedhar
    Edited by: 791907 on Oct 15, 2010 10:24 PM

  • How to navigate from one view to another view?

    Hi everyone facing a problem in navigation when i click on the list another view should be appear..
    page1.view.js:-
    list1.onclick=function(evt){
      $.sap.require("sap.ui.core.EventBus");
      var bus=sap.ui.getCore().getEventBus();
      bus.publish("nav","to",{
      id:"idDemoUI2",                       //..id of page2...//
      context:evt.getSource().getBindingContext()
    page2.controller.js:-
    onBeforeRendering: function(evt) {
      if (evt.data.context) {
             this.getView().setBindingContext(evt.data.context);
    i have a list i want when i click one the row of that list another view will appear so i use onclick event on the list and then use bus for navigation and recieving data in the target page but its not working anyone please tell me  where i am wrong.
    Regards
    Kelvin

    Hi Kelvin,
    How about using Routing concept than the getEventBus. Below link should help:
    Step 3: Navigation and Routing - User Interface Add-On for SAP NetWeaver - SAP Library

  • How to map from one table to another dependable on data from lookup?

    I'm new in warehouse builder and i wonder how to do something what is very easily done by sql..
    I want to map data from table_a to table_b, but not all rows - only those for which one of attributes in table_a have reference in table_c (is not null)...
    I suppose it should go somehow with lookup operator, but playing with it, I wasn't able to achieve goal..
    Thanks in advance for any help..

    Hi Zeljko,
    On of the easier ways (in my experience) of accomplishing this is to define a view which does a SELECT DISTINCT on table A and uses an EXISTS clause to exactly filter those records that you want to get into your target table (i.e. the ones that already have an occurrence in table C).
    And if performance is an issue, you could experiment with FIRST_ROWS hint or rownum=1 in the EXISTS clause.
    Cheers, Patrick

  • How to access a table from one view in another view via ABAP source code.

    Hi experts, I need your help.
    I am working in SAP CRM 2007 developing code modifiying views using transaction "BSP_WD_CMPWB" and my problem is the following:
    After the "Account Identification" process I go to "Create Case" and click in "Complaints" option in the navigation bar.
    Here there are several views involved, like "General data" and "Parties involved"
    "General data" belongs to the component "BT126H_CALL" and the name of the view is "SCDetails.htm"
    "Parties involved" belongs to the component "BTPARTNER" and the name of the view is "Partner.htm"
    The "Partner.htm" view has a table that is displayed using a "<chtmlb:configTable . . . table = "//BTPartner/Table" instruction.
    I need to acces the table "//BTPartner/Table"  that belongs to "Partner.htm" in the view "SCDetails.htm" and add data into it.
    How can I do that ?
    Add the data in the view "Partner.htm" itself is very simple, I am using the "EH_ONINSERT" method but I have not idea how to do that from "SCDetails.htm".
    Thanks in advance for your help.
    Best Regards.
    Exequiel.

    Hi,
    as I understand from your question you would like to add a partner to the complaint document.
    The complaint document is a 1Order document and has the root genil node named BTOrder. Using the genil relationships you have to get the BTPartnerSet and then the right Partner Relationship.
    You will find a lot of information in the newsgroup on how to do this by doing a search.
    But a quick help would be to use the sapgui transaction genil_model_browser, component set ONEORDER and using the tree structure navigate from the BTOrder root node to the Partner set.
    Best regards,
    Erika

  • How to copy from one image to another

    Hi, I'm struggling with the most basic process in PSE 10. I have selected an area in a photograph - now I want to delete the rest of that photograph and add the selected area as a layer to another photograph. Having spent hours searching online, I'm hoping someone can give me an answer please.
    John
    Message type was edited by: Brett N

    Hi Barbara, I can't explain this but it seems to be working now, even with the Tiff format.  I'm doing exactly what I was doing before - selecting an area on the photo, then pressing edit - copy.  Before I was getting an error message, but now I can copy the selection into another Tiff.  I must be doing something different or I must have changed a setting - I have no idea what, but the problem seems to have gone away. If only every problem was that simple! 
    The upshot is I can now edit in both Tiff and PSD and am really delighted with the help I received from this forum.  I know they were very basic questions, but sometimes those are the hardest to answer.
    Many thanks to everyone who responded, John

Maybe you are looking for