How to 'navigate' a video

strange one i guess, but having just watched half of a 2 hr move in the ipod, i have switched it off, and then upon switching back on and selecting the video i was watching, it plays back from the start, but with no 'quick' way of getting to where i left the movie.
I can press and hold the fastforward button, but this can take 10 mins of pressing and holding untill i get to where i want in the film. Is there an easier way to navigate large movie files?
Mac Mini - Ipod Video 60gb Mac OS X (10.4.3) Belkin USB and Firewire Hub, Apple Bluetooth Keyboard and Mouse

just use the clickwheel, that is, click the middle button once and rotate as when navigating inside a song. At times the movie starts where you left it, but i haven´t managed to find out when or why...

Similar Messages

How do I get video to IMovie from my dvd camcorder?

How do I get video from my Canon DVD camcorder to Imovie?

The second half of this file discusses moving files from an iPod to a computer:
http://docs.info.apple.com/article.html?artnum=300173
Videos are presumably in the "Video" rather than "iTunes" directory; you should be able to just navigate around in that directory for the file you want rather than replacing the entire directory as that article suggests (in which case you'd want to omit the "moving the directory to the desktop" steps, and so forth).
Patrick Alexander

How can i move video and music and narration all at once in the project library

how can i move video, narration and music all at once in the project library it is only moving the video

Select the directory with your pngs in it.
Right-click>Browse with Adobe Bridge
Select your pngs
Tools>Photoshop>Load to photoshop layers (not sure how many layers this can handle--you may wind up having to do this in batches)
Save your new psd
In Flash, create a new symbol with a blank timeline
Ctrl-R, navigate to the psd you made earlier
Select all the Photoshop layers
Check "create MovieClips for these layers."
Convert layers to keyframes or flash layers (not important, since you probaby don't need to keep this symbol)
OK
You'll have Movie Clips, not Graphic Symbols, but maybe you can write or find a JSFL to convert them and then you can block select them, click the Properties button, and change the type from MovieClip to Graphc.

How to sync the video to my iPad using Lightroom Mobile

HI,
I wonder how to sync the video to my iPad using Lightroom Mobile. At the moment seems those video files have not been uploaded. I got all my still images downloaded to the iPad except video files.
Hope someone here can help. I am trying to use Lightroom to replace iPhoto. This is the only thing bothering me.
Thanks.

Hi Soup2105,
Please refer to below article.
Lightroom mobile FAQ
Navigate to how to sync option.
For getting pictures from Iphoto to Lightroom you can refer to below link.
http://helpx.adobe.com/lightroom/help/import-iphoto.html
Thanks

How do I add video to be hosted directly on my MUSE site without using a third party site like Vimeo / You tube etc ?

How do I add video to be hosted directly on my MUSE site without using a third party like Vimeo / You tube etc ?

Hi,
You can consider html video tag to do this. You will need to add it in Muse using, Object-insert as html. Detailed instructions can be viewed here
HTML video Tag

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

When we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards. It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer. Help!

when we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards. It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer. Help!

Click here and ask the iTunes Store staff for assistance.
(108048)

How to Move a Video File from Movie Section to "TV Shows" Section

I have an Ipod classic, and am trying to figure out how to move a video file from the "Movie" section to the "Tv Shows" section. I have Itunes version 1.3 which for my device is listed as the most current version.

haha itunes 1.3, epic.
to clarify that, I think he would have an ipod classic 80gb which the newest version is 1.3 I think.
However to answer your question, in itunes right click the movie, go to properties, then go to options, where it has media kind put it to tv show
Message was edited by: Nudethecih

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

How do I move videos from iphoto to imovie

I've got a new macbook pro 17", Pegasus 12TB, and all manner of photos and videos. Ive recently upgraded from a G5. Hence, I took a variety of USB drives and found all sorts of photos and videos, FCE stuff, and basically did my best to consolidate them into either Aperture 3.x (kept up to date) and iMovie (latest updates). I keep all my software updated as soon as any update is released.
I am finally learning a bit about how to use a laptop with tons of information (pic/vids mostly). It wasn't as easy as I thought. Needless to say, the laptop is the cruncher of information and the pegasus is a screamer with speed. I am moving all my files (aperture libarary, iphoto library, and FCE stuff) to the pegasus seeing as the cute little internal HD doesn't hold much.
I've been able to find out how to move iMovie files from my internal drive and various other asundry of external FW800 drive into the pegasus 12TB to consolidate them in one place. All seems well after a few months of figuring this out, getting a quasi-workflow going.
Now I'm stuck a bit. I have Aperture and iPhoto showing up in my event library as having vidoes. I used to use iPhoto to manage videos that were simple point and shoot camera style vids. I now want to take the many files and do the same as I've done with all other video: move the video files under iMovie control on the Pegasus.
Problem: I can't seem to make this work except in one fashion: drag each and every individual clip over to an event in iMovie under Pegasus drive. Talk about time consuming! Not only that, it doesn't move it, it copies it. Then I have to go back and delete it in iphoto.
I've tried making a smart folder in iPhoto to find videos and then hopefully export them to the desktop. Then I could import into iMovie on the pegasus. No go. Can't find the videos. They are somehow scattered about inside of iPhoto in such a manner that I can't seem to find them unless I open each project and manuall search them out. I'm sure I'm doing something wrong here, has to be an easier way.
I tried highlighting all the videos on iphoto that show up in the imovie events library and just doing a mass drag/drop. Not go. Just doesn't do it. Ignores me.
I'm out of ideas.
How does one get video scattered around inside of iPhoto (and to a lesser extent, aperture) so that I can consolidate them under iMovies control on the pegasus?
Thanks
Robert

iMovie can access those movies that are inside iPhoto. Just look in the Event pane of iMovie and click on the iPhoto icon:
All of the movies in iPhoto will be displayed at the right where you can access them for whatever project you'd like.
Otherwilse you'd have to export all of them out of iPhoto using the File ➙ Export ➙ File Export menu option and use the Format = Original option. Them move them into a folder in the Movies fodler and let iMovie find them there. Then you'd have to do that each time you import a movie into iPhoto or manually upload the photos and movies ot a folder on your Desktop and then import the photos only into iPhoto and move the movie files into the Movie folder.
OT

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

How to Navigate to a New window

Hello am new to obiee can anyone please tell me how to navigate to a new window if i click on a report column. There is no Dill in place option set to it.

Need some more information about how you are navigating from the main report.
If you are using GoURL to bring up a report by specifying a hyperlink on a columm in the main report, then you should be able to use target="_blank" to open a report in a new window.
search the forum or check this out:
Re: How to add return link to report??
Re: how can we pass the master report value in to detail report
Hope this helps!

How do I transfer videos from one ipad to another

How do I transfer videos from one ipad to another

Sync to computer, then from computer to other device.
http://support.apple.com/kb/HT4083

How can I move videos from Revolution phone to mac?

How can i move videos from Verizon Revolution to Mac? My computer is Mac os x version 10.5.8
I have several videos that are too long to send via email, which is how I have been moving pictures and videos. I plugged it in using the USB port. The phone says I'm connected via usb. My mac brought up a box warning that the "cd connected" is not readable.

Hi ..
You can use the Image Capture app located in your Applications folder to import vidoe content from the phone to your Mac
Instructions here > Using a camera with your Mac - Apple Support
If you have problems, make sure your Mac's software is up to date.
Open System Preferences > App Store then click: Check Now

How can i transfer videos without losing the sound to my iPhone 3G?

Hi
I have bought my iPhone 3G yesterday. I have found out how to transfer music from iTunes however i can't transfer videos. I'm selecting the videos i want to transfer on the videos tab after i chose my iphone from the side menu and pressing apply. iTunes says that its syncing my iphone but it doesnt transfer the videos.
Lately i have found out a function on the advanced menu for movies as "create iphone or ipod version". When i used that it transfered that video to my iPhone however the sound was completely lost besides that action takes too much time(around 10 mins for a 3 min video and i have a pretty strong computer).
How can i transfer videos without losing the sound to my iPhone 3G?

One thing I'd recommend is that you make sure the video/audio you're trying to transfer falls within the guidelines listed in the 'Video' section here:
http://www.apple.com/iphone/specs.html
What's most likely happening is that the file is not converted as such so when you try to transfer it, it's wanting to convert it but is unable to for any number of reasons.
There's software out there that might make this easier for you but I can't recommend anything specifically.

How to 'navigate' a video

Similar Messages

Maybe you are looking for