How to navigate between windows in Finder?

Hi everyone, if you remember, we could "browse" between our Finder windows just like we do it in Safari: with a simple gesture of swiping on the Trackpad. Now, this function is also gone in Mavericks, or maybe not, hope it doesn't. Does anyone know whether it's possible to "activate" this again via Terminal or something like that? Thanx a lot

Many people don't use a mouse at all. You can hold down the left of the trackpad to drag item, or with Tap to Click you can use one finger and depress the trackpad to drag. Make sure you have Accessibility settings to not enable drag lock.

Similar Messages

How can i navigate between windows?

Hi.
Experts
I want to navigate between windows.Because i am making a project of Guest House management in webDynpro.So many many screens are there to built and link.I am planning to make a single webdynpro component for it.
Is this right?If yes Tell me how can i navigate between windows.
(like room request to allocate room and many other window).
Regards
Sunny.

HI Sunny
If You want to make a window DEFAULT follow these steps
1) Suppose if you have 2 windows say Window1 and Window2
2) Double Click on your Application
3) In Application Properties -->Interface View
you will get two interface views Window1InterfaceView and Window2InterfaceView
4) Select which ever window you want to make as default
and make your view in desired window's DEFAULT property to true
Best Regards
Chaitanya.A

How Do I Reduce Window Size/Find Audio Track

I am using Elements 4.0 and it works fine except for two issues. When I launch the software, the windows are larger than my monitor screen and I have to drag the windows around to see and access the buttons for the features. I have a 17" monitor and have it set to the highest quality (32 bit, which is 800 x 600 pixels). If I reduce the quality, this will probably interfere with editing color in the images.
Secondly, in the Help section under audio it shows an audio bar under the thumbnails and says you can drag the audio bar to designate where to start music. I cannot find the window that displays the audio bar. It's not in the Organizer for slide shows. Can anyone help?
Thanks ...

Thanks. I tried that and it worked. I can now see the entire windows on my monitor screen. And the audio track now shows up in the edit window below the images. It's now possible to right click on the tracks, delete the ones I'm not satisfied with and add new ones.
However, for others out there, the change in screen resolution reduced my desktop and other windows that I open in other programs and makes it difficult for this 66 year old man to see. So I have to toggle back and forth, in between using Elements 4.0 and other programs. But that's no big deal ... just another hoop to jump through.
Thanks for the tip.
Allen

Upgraded to mavericks. Is there a tutorial online to how to navigate between web sires?web

Is there a tutorial online to help navigate the mavericks o/s
don't see bottons on top left to minimize or close windows
or how to close grey sidebar

the yellow button minimize
the green maximize
the red close
https://www.google.dk/search?q=os+x+mavericks+manual+pdf&oq=os+x+mavericks+man&a qs=chrome.2.69i57j0l5.5856j0j7&sourceid=chrome&es_sm=93&ie=UTF-8

How can we navigate between two windows of same component in webdynpro ABAP

Hi
how can we navigate between two windows( not views ) of same component in webdynpro ABAP. its an urgent requirement
Thanks in advance.
Regards
Laeeq

Hi Laeeq,
You cannot navigate between windows of one component. You can only call a dialog box showing the contents of a second window, or you can embed the contents of a window of a different component.
Just add all the views you need to the one and only main window of the component.
Ciao, Regina

How do you run Windows on a Mac?

I have had a Dual Core MacBook Pro since last July, but I have never run Windows on it. Could someone here please explain to me how I can run Windows on my Mac, how to switch between Windows and Mac OSX, and if Windows Vista is able to be run on a Mac. Or, at least point me in an article already posted on this subject. Thank you!
MacBook Pro Mac OS X (10.4.8) 17" Screen, 2.16 GHz Processor, 1 GB RAM, 120 GB Hard Drive

Please search the discussions before posting. You'll find hundreds of threads detailing how to run Windows on a Mac and could have answered your own question. Or better yet, just search Google.
http://www.apple.com/macosx/bootcamp/

Muvo txfm can't navigate between audible's audiobo

Hi,
I'm having trouble figuring out how to navigate between different sections of an audiobook. For example if a title is split up into separate files i.e. part -3, I can listen to the first part but I can't find scroll to find parts 2-3. When I try scrolling the player freezes, and for some reason audiblemanager stores the audiobooks in the root directory(?)
If anyone could help, I'd greatly appreciate it.
Thanks!

Nevermind. Just figured it out.
FYI for any other audible user having this issue:
The player has a problem navigating between audible files if they were batch loaded (i.e. selecting a whole set at a time on Audible Manager and then dropping them into the player.) If the files were added one at a time on Audible Manager the player navigates thru all of them just fine.

Navigation between Windows / Empty Lines

Dear experts,
i have two questions and hope you can help me.
1. How can i insert empty Lines between two ui elements.
At the moment its like:
UI-Element1
UI-Element2
and i need it like this:
UI-Element1
UI-Element2.
2. Is it possible to navigate between windows ?
Thanks a lot
René

Hi Rene,
Use horizontal gutter between the UI elements you will get it as you want.
Window navigation is nothing but navigating from one application to other.Check this document article.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2064719b-8851-2b10-a399-b356d91ca4ba
Check this standard document to create suspend or resume plugs.
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/45/19bf8c16f25d7ae10000000a11466f/content.htm

When we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards. It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer. Help!

when we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards. It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer. Help!

Click here and ask the iTunes Store staff for assistance.
(108048)

How to open and navigate between human task forms in a same page?

Hi
I use Oracle BPM 11.1.1.5
I have a question about taskflows in BPM Application.
In ADF web application, I create a sipmle task flow and insert view id and bind these to jspx pages, my pages are opend in same page when
return an outcome.
For exapmle I have three pages like A,B,C.
In task flow, insert three view ids and bind to A,B,C.
My first pages is A, and when outcome is B navigate to B, when my outcome is C then navigate to C in a same page not separate pages.
But my problem is here.. in BPM Application when create task forms, every task has a separate task flow that there exist a single view id and a wild card flow in it.
In BPM workspace when initiate human task form is closed, I should press refresh button to see next human task form in task list table.
I tried to create a simple task flow and insert human task forms in it and navigate between these.. but show human task form in wrong display and don`t show some component and human task payload.
Now, my question : How to open and navigate between human task forms in a same page like software installation?

Having a separate Data Control for each human task is normally the case. There is a way to assign multiple human tasks to a single data control (and one task flow), but I don't think that this is going to help you with what I think you're trying to do.
If your human task is called "EmployeeDetail", then you'd use the data control associated with this for the UI pages in the task flow diagram that is associated with this human task. For example, you might have a first page that has just the basic employee information - the fields (at least the ID field) would come from the EmployeeDetail data control. When the end user clicks "Next", you might have this UI page flow to a second UI page in the task flow diagram that has the employee's address information. You might place the address fields from the EmployeeDetail data control onto this second UI page.
You might be asking how the work item instance can automatically flow to the next interactive activity in the process while staying inside the first interactive activity's human task's task flow diagram. This is not how it works - the task flow diagram models the end user interaction while inside a single human task that is tied to a specific interactive activity in the process. If you want a the end user to be able to move the instance through multiple interactive activities in the process in one interaction, look at "Activity Guides". Activity Guides do a nice job of this.
Dan

How to Navigate to a New window

Hello am new to obiee can anyone please tell me how to navigate to a new window if i click on a report column. There is no Dill in place option set to it.

Need some more information about how you are navigating from the main report.
If you are using GoURL to bring up a report by specifying a hyperlink on a columm in the main report, then you should be able to use target="_blank" to open a report in a new window.
search the forum or check this out:
Re: How to add return link to report??
Re: how can we pass the master report value in to detail report
Hope this helps!

IOS 6.1.3 / Windows 7 - 64 bit. I am connecting my IPhone 4 to my Windows desktop, in ITunes I click on IPhone and then the "Check for Update" tab. It takes me to a Windows explorer window. How do I get it to find updates?

IOS 6.1.3 / Windows 7 - 64 bit. I am connecting my IPhone 4 to my Windows desktop, in ITunes I click on IPhone and then the "Check for Update" tab. It takes me to a Windows explorer window. How do I get it to find updates?

Hello ibebry
Try using the Software Update on your iPhone by going to Settings > General > Software Update. One thing to keep in mind if you are trying it on the computer is to make sure that you are not pressing any keys down when checking for updates as that may bring up a pop up window to find the update file.
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Regards,
-Norm G.

I've moved my iTunes media to a new drive, how do I get iTunes to find it. I'm using Windows 7

Hi,
I've moved my iTunes media to my 'spare' internal D Drive, following the instructions on this link:(I'm using Windows 7).
Move your iTunes Media folder on a Windows PC - Apple Support
I hit a problem at stage 11 when I had to move my original media file to the recycle bin. The process started then it stopped, saying that the file was too big for the recycle bin (54 GB or thereabouts). It then asked if I wanted to permanently delete the files instead. I said yes. (I have them backed up externally).
The iTunes media file is in my D Drive, but I can't get iTunes to locate it. I've tried going through preferences/advanced and browsing to it but that does't seem to work.
My media is all listed in iTunes, but on the cloud rather than on my hard drive (C). Downloading it all from the cloud would defeat the object of freeing space on my primary hard drive (C).
Any ideas on how I could get iTunes to find the files on D Drive ?
many thanks,
Matt

See Make a split library portable. With luck you should be able to move the iTunes folder to the D: drive, place the iTunes Media folder inside it, and shift-start iTunes to connect to D:\iTunes\iTunes Library.itl. If all goes well it should be as if you'd moved the entire iTunes folder as a unit in the first place.
tt2

HT1343 how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme.

how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme. For example if I'm in Excel and have 5 windows open I want to be able to scroll between each window of Excel only with a shortcut.
Please help!

Command and ~ keys to tab between open windows.
Technically it is the Grave Accent ` (aka reverse quote) under the tilda ~ key. Tilda ~ is shifted, and Grave Accent ` is not.
Command-Grave Accent

How to switch between 2 windows of the same application using Cmd+Tab

Hi,
I am using my mac now since about 10 months. I was used to work with Linux and Windows XP.
Something I am badly missing on mac os x is the possibility to switch between 2 windows of the same application using cmd + tab just like it simply works for Linux and Windows (and maybe many other OS out there!).
Very often I have 2 text files open in 2 editor windows (e.g. TextEdit) and need to copy and paste text from one window to the other. I was used to simply use ALT+TAB. But here I have to get my right hand away from the keyboard and use the mouse to change the focus from one window to the other and then use the mouse again to get the focus back to the previous TextEdit windows.
THIS REALLY *****!!!! It makes me crazy. I cannot believe that such a "modern" OP does not support this action. I must be doing something completely wrong or did not understand the mac correctly. Right?
Does anyone have an idea how I can get mac to do something all other operating systems so easily do?
Thanks
Quartz84

Hi Kappy,
well what you are saying is obvious to me. This is not the point for me and not what I wanted to know. But I think you answered my question anyway: OS X is unable to switch between windows of the same application as I mentioned in my example.
WHY NOT???
Every other OS is able to differentiate between windows and not just applications.
Another example: The Mail application and an Email editor window. When you are writing an Email and you want to switch to the main window of the Mail application to read something you must again use the mouse!
I mean Apple seems to be "somehow" using FreeBSD in the background and even in FreeBSD's window manager it is possible to switch between windows of the same application.
Well, in the Apple world it is always the pour user who is not intelligent enough to understand Apple's philosophy ;-(
To me this is not modern, it is simply a weakness of the OS.
Cheers
Quartz84

How to navigate between windows in Finder?

Similar Messages

Maybe you are looking for