How to Network setup for Lazerjet 6P

I have a lazerjet 6P set up in a PC network and it is shared. I can see it from the Mac air but it won't print. What am I missing ? Please step by step as I am somewhat new to MAC ( It is a transition but well worth it !!!!)
Thanks

What you can try is enabling Windows SMB sharing on the Mac. On the Mac Log into your Windows computer to view something that is shared on the Windows PC, like a hard drive or even just a folder.
Make sure the Windows firewall is turned off (If you are bhind a router you don't need it turn on).
What version of Windows is running on the PC? Win 7, XP, Vista??? Do you have passwords set on the Windows PC?
But in the end I have never gotten my Mac to print to any printer connected directly to a Windows computer. No matter what I try. No matter what permissions I have set on both system. No matter how I connect to the Windows PC over the local network. For me it has never worked and I'm fairly skilled in networking.

Similar Messages

How to Network Interface for Remote Debugging in Adobe Flash Professional CS6?

How to Network Interface for Remote Debugging in Adobe Flash Professional CS6?

Check out : http://helpx.adobe.com/flash/using/whats-new-cs6.html
In that click on "Choose network interface for remote debugging for AIR" section.
Hope it helps.

Network Setup for 10g RAC

We are planning a 2 node RAC cluster with nodes in two room on a single site. The shared storage will be on a SAN which is replicated/mirrored (via the SAN) to a second SAN in the second room.
Setup
room A :- Node A SAN A
room B :- Node B SAN A
Room B :- mirrored copy of Data on SAN B
(both SAN and Host are capable of connecting to each other through SAN infrastructure)
My question /issue is around the IP network
The plan is for both node A and Node B to have 3 or 4 network connections
1 - Public Net
2 - Backup Net
3 - Private Net
4 - VIP addr - on the Public Net interface
My question s are
1 Do the Public Nets for both Nodes have to be on the same Vlan(subnet) or can they be on different Vlans (subnets)
eg
room A Public Net = a.b.1.0/24 (say gateway is a.b.1.1)
room A Host A public IP = a.b.1.20
room A Host A VIP = a.b.1.21
and
room B public Net = a.b.2.0/24
room B Host B public IP = a.b.2.20
room B Host B VIP = a.b.2.21
assume that there are other host on both networks
Will this work ??
How does the RAC nodes load balance across both nodes ? and are the VIP addrs used to achieve load balancing ??
Second question
While I can connect both room via a private network without routing (via dedicated fibre to two dedicated private net switches. I could save $$ by using a private vlan routed to each room Say a /29 network ( a.b.3.0/29)
Can I connect the private nets via a routed vlan ?

The public IP's all have to be on the same subnet.
Ie, the first 3 sets of number for the IP address
must be the same for the public and virtual IP's.
There are no options in that.Not necessarily, but probably most often correct. If the subnet mask is something other than 255.255.255.0, then the statement above may not hold and/or may not be sufficient. The public IPs and VIPs all must share the same subnet, that much is always correct. What constitutes the same subnet may vary based on the subnet mask used in your network.
For example, if the subnet mask is 255.255.254.0, then 172.16.172.4 and 172.16.173.12 are on the same subnet. Conversely, if the subnet mask is 255.255.255.128, then 172.16.4.2 and 172.16.4.210 are NOT on the same subnet. If you're not sure, consult a network admin--there are also plenty of online tutorials regarding subnet masks and how they work.

What would be the best network setup for me?

I am planning a network system for my medical practise. The network will comprise a Macbook Pro(myself) , an Imac(receptionist) and a Macbook for occassional admin use.
I need some advice as to the best way to store the shared data. I will be using Filemaker Pro and will be storing patient appointments, demographics as well as clinical info, visit notes and investigations.
I am considering 3 possible setups
Have shared database on the Imac, backed up by a 500 gigabyte hard disk, or possibly a time capsule, using Time machine.
Have an ethernet hard disk for storage, but then I probably would need to have a different backup system.
Use a mac mini as a file server.
Or use an altogether different setup.
I would appreciate suggestions.
Thank you
ajdk

Hi ajdk-
Then it comes down to your morals and how carefully you want or need to protect patient confidentiality. Your basic network concept should work.
As a start, storing any patient data with regular business data and emails is asking for a security breach.
Make sure to back up your back ups and store said backup securely in a media-rated fire proof vault.
These documents may help:
Creating a small Ethernet network
AirPort Base Station and Network Setup Guide (Mac OS X 10.4 or earlier)
Luck-
-DP

I have a hp deskjet 3050 all-in-one printer how can i setup for wireless printing my os is windows7.

how do i setup my hp deskjet 3050 all-in-one printer for wireless printing my operating system is windows7

Unplug the USB cable. Now go to Start > All Programs > Hewlett-Packard > Deskjet 3050 > Add a Device. Run the program and choose Wireless as the installation type.
Follow the directions. It will ask you to connect a USB cable temporarily. Do not connect until it asks and remove it when it tells you.
Finally, when you are done, go to Control Panel > Devices & Printers and delete the USB instance of the printer so you don't get confused when printing.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Network Setup for a 1232AG config with multiple AP's

I'm looking to deploy a temporary outdoor network using 1232AG radios, with only one radio connected to Ethernet & Internet. All the other radios will have a A radio connection to the parent. And their
G radios will advertise for Client Access. Ultimately I'd also like to have the local ethernets active on each of the remote Radios, so that a switch could be setup for people who don't have Wireless.
So the questions, Is this type of setup even possible? If I use the A radios for back haul, and the G radio for Client Access, does the Ethernet get disabled?
What station-role in the network should each of the radios play. Ultimately I believe we could have different SSID's and IP Subnets for each AP, but if we kept them all the same, can we make this one big Bridge? So that someone can Roam between AP's. Granted I don't have the funds for Wireless Lan Controller. Sugestions?

So what you are trying to do is have some sort of MESH outdoor wireless, but using the 1232AG? Don't think you can do this by using the bridge role. You would have to go bridge to bridge and then have an ap connected to one of the bridge to handle users...

How to create setup for Java Application?

Hello,
I have created one Java Application. Now I want to create setup for that. I want to know if there is any tool is available for Java Application. If yes, then please help me to get that.
My emal id is "[email protected]"
Thanks in advance.
Sam

Go to www.zerog.com
Download InstallAnyWhere4now (free)
it is Awsome youll love it
M
bakbjo

Various network setups for media serving and backups

Are there any good sites, blog posts, etc that show different home network configurations with a Time Capsule, external HDs and Macs for handling backups and media serving? Right now I have a simple Setup where my TC backs up my MBP. I also have a couple externals HDs w a lot of music and video that's not in my iTunes library on the MBP, the HD of which is at capacity. I know I want to be able to easily access all of that content on my MBP, AppleTV, iPhone, iPad. I also want to have a good backup solution (possibly even a backup of the backup for redundancy). I just don't know the simplest way to do it and haven't found a good resource to see the alternatives and/or pros/cons of different configurations. Any suggestions would be greatly appreciated!

This is as I posted a Self help forum the only BT presence are the forum moderators your very likely to get help from other forum users it is just a matter of waiting until some one with gaming knowledge reads your post
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

How to run setup for new datasources without breaking old datasources?

Hi,
I am wondering how to install some more data sources (2LIS_05_Q0NOTIF, 2LIS_17_10NOTIF and 2LIS_18_10NOTIF) without breaking the delta mechanism for other data sources when I start to use the new datasources.
I have installed some QM cubes (0QM_C04, -05, -08 and -11) and delta loads run every night. Now I want to add two more cubes (0QM_C02 and -03). The new cubes use datasources that are not yet available.
If I now activate the needed datasources, delete the content of the setup tables again and run 'Application-Specific Setup of Statistical Data' for 'Quality Management', 'Plant Maintenance' and 'Service Management', I am afraid that I will re-initialize the delta queue for the datasources that are already in use... In other words: I am afraid of breaking all datasources in application 05, 17 and 18...
I cannot find documentation addressing this problem. Any input, anyone?
Best regards,
Christian Frier

Hi all,
if I understand you all correctly, I can use the following plan:
0) Wait until no documents are posted on the R/3 side.
1) Run the delta loads and check that the queues are empty (RSA7 and LBWQ).
2) Delete the setup tables.
3) Run the 'Application-Specific Setup of Statistical Data'
4) Create and execute infopackages for initial dataload (for the new datasources).
5) Create and execute infopackages for delta loads (for the new datasources).
6) Run the infopackages for delta load from the 'old' datasources without running a new initial dataload.
So basically 6) is the step I worry about.
That is that I can start to use 2LIS_05_ITEM, 2LIS_17_ITEM and 2LIS_18_ITEM without breaking the delta sequence for 2LIS_05_TASK, 2LIS_17_TASK and 2LIS_18_TASK.
regards,
Christian

How do you setup for your multi cores and other settings?

since the preferences doesnt really give us a option does that mean that FCPX just "knows" how good your computer is and what you want to devote (memory wise, etc) to it?

I have the same problem - beach balls and temporary freezing, on 2 Mac Pros (8 Core, 32GB RAM, HD5870 card). All the while CPU and other resources are not maxed out; this is on 10.6.8. there seems to be 'some' bugs - for some people - that in fact make FCPS quite slow (and slowing hte system down as well) all the while there is no bottleneck in hardware....

Best Networking Setup for low CPU use?

Going to be connecting two G4's over a 100-T router. What is the least CPU intensive way to trasnfer files on computer A to computer B?
FTP?
Personal File Sharing?
I need the least CPU intensive out of all the possible options available.
Burning not an option, need to be over the network.

FTP while both machines are connected to a switch that is using Jumbo Frames. Of course, your network cards also have to support it (unlikely in a G4).
Using Jumbo Frames greatly reduces the amount of CPU time due to each packet being able to carry more data (less packets == less processing time). The only issue with JF is that every device inbetween the computers must support the same JF mode.
Since UDP (FTP) is a state-less connection, it is faster.

Network Setup for a 1242G LWAPP config for with Bridge

Hi all,
I'm trying to find solution for mobile vehicle. The base wifi system is lwapp with controller and AP.
I was thinking to make bridge between LWAPP AP's and Autonomous AP on the mobile vehicle with client behind the AP, but now the vehicle will have 3 clients so I will have to put something behinds so I will have to put switch behind
does that solution seels good or does I need to choose wifi router ?
according to me keep an Autonomous AP was good idea.
is it possible to make the AP works with PEAP and other high level security like EAP-TLS and more ?
thanks in advance
hope you will tell me your opinion
Matt

Matt this should be pretty simple to do. You said that your base wifi system is controller based with LWAPP AP's correct?
Assuming you already have PEAP in your current operation, all you would need to do is take your Autonomous AP and make it a WGB. From there you could plug in any switch that you wanted for you 3 clients. If you need help with configurations let me know and I will help you out.

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards.

How can I make OSX index a network share for spotlight?

How can I make OSX index a network share for spotlight?
I am using a QNAP NAS with SMB network shares, which I mount with OS X Mavericks. They are not searchable, as far as I know because of the indexing of network share is by default not activated.
To force the OS to index them I activated this via mdutils. But this is no solutions. This makes spotlight to index the share once. But I want spotlight to index it always and keep it up to date. I have a huge amount of documents & fotographs, which is very difficult to manage without being searchable.
Unfortunately the only solution I found in the www was the mdutils-way, which seems not to work, maybe only works not for me.
I would appreciate any assistance,
Thank you,
Stefan

My thanks to everyone who has contributed to solving this problem here.
It appears that there still is NOT a good, reliable solution. Please correct me if I'm wrong.
I did find this on http://jonathansblog.co.uk/how-to-enable-spotlight-indexing-on-a-network-drive:
===================================
To enable spotlight indexing on a network drive:
# mdutil /Volumes/name -i on
To disable the indexing of a connected network drive:
# mdutil /Volumes/name -i off
To check the status of indexing on a connected network drive:
# mdutil /Volumes/name -s
===================================
And, I found this on the Synology NAS forums:
cd /Volumes
mdutil shareName -i on
mdimport -Vp ./shareName
where shareName = name of your share
I have used the mdutil /Volumes/name -i on, and it seems to work.
But, if I understand it correctly, it is a one-time indexing -- the index is NOT keep up-to-date with changes.
So, how can we keep the index up-to-date?
My thought was to schedule a Terminal file to execute each night with the mdutil code.
Would this work? If so, how would you setup a scheduled run?
Would it have to be done on each Mac that accesses the Share?

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

How to Network setup for Lazerjet 6P

Similar Messages

Maybe you are looking for