How to new install on one disk?

I have MacBook with one SSD drive. How to not upgrade 10.9 to 10.10, and cleaned SSD and install new 10.10 system?

Hello,
Have you considered either cloning your old 60GB hard disk drive to the new 160GB model, or using your recovery discs to install a fresh copy of the operating system plus ThinkVantage utilities to the new hard disk drive?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

How to move Tablespace from One disk group to another disk group in RAC

Hi All,
I have 11gR2 RAC env on Linux.
As ofnow I have problem with disk group. I have 3 disk group which is almost full - 98%. I have added one NEW disk group and want to move some of the Tablespace(TBS) from OLD disk group to NEW diskgroup and make some free space in OLD disk group.
Can any one suggest me how to move TBS from one disk group to another disk grup without shutting down the instance.
DB is in Noarchive mode.
Thanks...

user12039625 wrote:
Hi Helios,
Thanks for doc id but I am looking for noarchive mode solution. becaues I got ORA-
"ORA-01145: offline immediate disallowed unless media recovery enabled " when run alter database datafile '...' offline.
Hence I am trying something and findout below steps but not sure how useful it is:
1- put tablespace offine
2- Copy the file to new diskgroup using Either RMAN or DBMS_FILE_TRANSFER.
3- Rename the file to point to new location.
4- Recover the file.
5- Bring the file online.
I had move 240M TBS from OLE to NEW.
These steps run successfully so I think this is valid for noarchive mode.Hence want to confirm..so inform me please.
Thanks :)I have doubt in my mind:
1. You database is in noarchivelog mode
2. You're taking tablespace offline
3. Suppose you're moving a file of size 10GB(or any larger filesize) to another disk group
4. Now after moving the file, you're trying to bring the tablespace online............NOW
tablespace will need recovery. if the required data is inside the SGA then it is ok. But if the data has been flushed, then?
if step 2 and 3 has taken significant time, then most probably you'll not be able to bring that tablespace online.
Regards,
S.K.

How do I install a mini disk in my macbook?

How do I install a mini disk in my macbook?

You can't. Mini discs won't work in slot loading players. You'll have to find a friend with a tray loading CD/DVD player who can copy the inforomation on the mini disc to a USB thumb drive.

HOW TO MOVE DATAFILES FROM ONE DISK RAID TO ANOTHER:PLZ HELP ME :=)

Hi all,
For Tunning reasons : perform The I/O from the Instance to datafiles (database). I decide to move some Index datafiles from One DISK RAID to another.
I'm on Linux Redhat Server and Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
My database 's On PRODUCTION and there 're many web applications updating some databases tables and for sure using Index tablespace. I preapared yet my procedure to move datafiles but I'm posting this to be sure that I will not have BAD EFFECTS on my Oracle database.
So I plan without SHUTDOWN MY DATABASE to these steps :
/*Step1 : */
ALTER TABLESPACE INDX OFFLINE ;
/*Step 2 : move datafiles to new disk raid*/
mv /u01/oraindx/DB01/indx01_05.dbf /u01/oraindx2/DB01/indx01_05.dbf
mv /u01/oraindx/DB01/indx01_06.dbf /u01/oraindx2/DB01/indx01_06.dbf
mv /u01/oraindx/DB01/indx01_07.dbf /u01/oraindx2/DB01/indx01_07.dbf
/*Step 3 : */
ALTER TABLESPACE INDX RENAME DATAFILE '/u01/oraindx/DB01/indx01_05.dbf' TO '/u01/oraindx2/DB01/indx01_05.dbf';
ALTER TABLESPACE INDX RENAME DATAFILE '/u01/oraindx/DB01/indx01_06.dbf' TO '/u01/oraindx2/DB01/indx01_06.dbf';
ALTER TABLESPACE INDX RENAME DATAFILE '/u01/oraindx/DB01/indx01_07.dbf' TO '/u01/oraindx2/DB01/indx01_07.dbf';
/*Step 4 : */
ALTER TABLESPACE INDX ONLINE ;
Please verify my procedure and tell me the precautions that I should take care :=)
regards,

Werner,
If this is an active databases (indexes are used),
you cannot set offline the index tablespace.you can offline it.
DAB user:
SQL>create tablespace inds datafile '/oracle/newdb/mydb/inds01.dbf' size 10m;
Tablespace created.
Scott user:
SQL>create table t2 (col1 date, id number) tablespace users;
Table created.
SQL>create index t2_ind on t2(id) tablespace inds;
Index created.
SQL>insert into t2 values (sysdate,1);
1 row created.
SQL>insert into t2 values (sysdate,2);
1 row created.
SQL>insert into t2 values (sysdate,10);
1 row created.
DBA user:
SQL>select segment_name,segment_type,tablespace_name
2 from dba_segments
3 where owner='SCOTT' and segment_name like 'T2%';
SEGMENT_NAME                   SEGMENT_TYPE       TABLESPACE_NAME
T2                             TABLE              USERS
T2_IND                         INDEX              INDS
SQL>alter tablespace inds offline;
Tablespace altered.
SQL>!mv /oracle/newdb/mydb/inds01.dbf /oracle/newdb/mydb/inds0001.dbf
SQL>alter tablespace inds rename datafile '/oracle/newdb/mydb/inds01.dbf' to
2 '/oracle/newdb/mydb/inds0001.dbf';
Tablespace altered.
SQL>alter tablespace inds online;
Tablespace altered.
scott user:
SQL>insert into t2 values (sysdate,20);
1 row created.
SQL>
SQL>select * from t2;
COL1              ID
22-NOV-07          1
22-NOV-07          2
22-NOV-07         10
22-NOV-07         20
SQL>commit;
Commit complete.

How to Add/Install 16Gb Disk Caching SSD?

Hello everyone,
I just bought the HP Envy 700QE desktop from Costco. I did find the guide about this desktop/tower (www.nhangraphic.com/HP-Envy-700QE-Upgrade.pdf) but nothing is mention about how to install/config the additional 16Gb Disk Caching SSD. I really want to have this to improve the performance of the desktop. Could someone please help me how to add/install and full config 16Gb Disk Caching SSD for this HP Envy 700QE Desktop step by step? Thanks in advance.
Frank
This question was solved.
View Solution.

Hi Frank,
mSATA is just a mini-onboard SATA connector where a small circuit board (msata device) can be inserted. Typically it's used as a way with small form factor devices to add SSD like performance.
You can change the SATA controller mode from the default AHCI setting to RAID in the bios. Use Computer Setup to enter the bios. Tapping the ESC key right after power on the PC should bring up a menu selection.
If you run into problems then let us know.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How do I install Sun ONE ASTAware SD w/o javaw.exe error?

I have been trying to execute the Sun ONE Starter Kit successfully for a month now. I purchased the Starter Kit on CD-ROMs. I run Windows 2000, SP2 with all critical and recommended repairs, on a Pentium 4 board installed in a custom computer--that is, with the best of all hardware components. Every time I install ASTAware SearchDisc and then try to execute the search function, I receive the following error message, "javaw.exe has generated errors and will be closed by Windows. You will need to restart the program." I have tried every workaround offered in the forum and unfortunately none work. Would you kindly provide ASAP a step-by-step guide on how to resolve the error? Please leave nothing to the imagination, such as, when you state that the CLASSPATH must be set, please explain where the environmental variable must be set and how to set it (please refer to http://forum.sun.com/thread.jsp?forum=78&thread=8700; Topic: CD 1, Search Engine Installation Problem.
Operation of the ASTAware SearchDisc is especially important to me. I have submitted an invited prospectus for a business executive's book on component-based software engineering and software reuse. I intend to use Sun One to present simple examples of how software component teams work and, thus, achieve higher returns-on-investment than most current techniques. Yet, the state of Sun ONE's search engine is the very reason business executives are reluctant to adopt new technologies. When they see too many workarounds for an obvious defect in an application, business executives are reticient to spend great sums of money to transition to component-based technologies and software reuse.
Again, please help as soon as possible. Thanks.

thanks for that, according to this it should be run like
/path/to/build.sh build single netinstall
from inside the chroot
posting this for my own reference and in case it helps others, will mark as solved
thanks again for your help
Last edited by gav989 (2012-02-12 10:58:04)

How to re-install windows from disk

Hi
I have taken lenovo rescue recovery to my external drive sometime ago.
I am planning to upgrade my HDD to SSD and would like to re-install windows freshly from factory recovery.
However, when i tried to create rescue media, it was complaining "Only one Microsoft windows copy" in the system.
This seems due to previous factory backup taken to my external drive.
Now, i want to use the external drive to re-install windows. Please help me how do i re-install after fixing my SSD
Thanks in advance

You should have made a bootable USB in the rescue process. After installing the new SSD, boot into that USB with your external drive (with the data part) plugged in. It may also be possible that the external drive is also the bootable drive, which makes things easier.
After that, you should be in the Rescue and Recovery environment, where you can restore the factory copy of Windows onto your new SSD.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

How do i install from the disk?

Hello, I just bought a new mac. The mac comes with iLife 09 and my old mac had iLife 08. How do I use the new disk that came with the new mac and download the iLife 09 software to my old Mac? I tried and it said I cant? Any way I can?

There is no way to do it that complies with the software license agreement that you agreed to when you first booted up your new Mac. You will have to buy a retail version of iLife 09 if you want it on your old Mac.

How do I install software from disk on Macbook Air?

I have an external CD player but the Macbook Air doesn't seem to recognise it. So how do I get my software from disk onto my Macbook?

I did not get the "This document is not recognised do you want to choose an application to open it with" error message. It's just that it is not recognizing any content at all on the CD in Finder. I have used this external CD drive before with this Macbook. I also tried to open the docs through Word and it again showed that a CD was in "Devices" as a "Remote Disc" but does not recognize any of the docs on the CD.

How do I install Cs3 from disk, after trashing the trial version?

I've made the mistake of trashing the trial version of Cs3 that I had on my imac a few years ago.
Now I'd like to install photoshop cs3 on my imac as my other computer is out dated and I get the error message that CS3 is conflicting with CS3 on the computer.
I realise it was a mistake to trash the trial. Is there anything I can do?

Download the cleaner tool from the following location and select "CS3" from the pop-up menu. http://www.adobe.com/support/contact/cs5clean.html
It will show you all CS3 products installed on your machine and will also allow you to remove them selectively. Select the trial build and click "Cleanup".
Or if you have no other CS3 or CS4 application installed on your machine you can just click "Clean All CS3/CS4" to clean your machine.
Then try to install Photoshop CS3.

My iMac will not let me install an external disk drive. What do I do to install it?

How do I install an external disk drive?

Is this a new external drive you are trying to set up for the first time?
If so, connect it to the Mac, launch Disk Utility in the Utilities folder and format it as noted here:
http://osxdaily.com/2012/01/04/format-an-external-hard-drive-or-usb-flash-drive- for-mac-os-x/
All data on the disk will be erased!

How can I install the CCMS tool??

Hi,
      I want to configure the CCMS tool but I don't know how.... I want to install it in the development environment to make some test and then install it on QA and production environment because right know I don't have a Solution Manager or something like that to install the CCMS and use it like the central monitoring system.
Someone of u know how can I install it one by one in that systems?
Thanks a lot people for your help!

Hi,
You need to implement CCMS in all the system(DEV, QA & Prod) separately. We have implemented CCMS separately in our landscape(without Solman)
If you dont have solman & want to implement CCMS then please follow method:-
Backgroud:- In the monitoring architecture, we can react automatically to an alert using auto-reaction methods. These methods are automatically started in the case of an alert and by default are executed in the system in which the alert occurs.
Defining an Automatic Alert Notification:-
With the monitoring architecture, auto-reaction methods can be defined that are automatically executed when alerts occur. The method CCMS_OnAlert_Email can be assigned to MTE classes in SAP system. If an alert occurs in this MTE class, the information is sent by e-mail.
CCMS_OnAlert_Email can automatically send an e-mail to the following addressees:
u2022        A Business Workplace user in client 000
u2022        An external e-mail address
The auto-reaction method for sending the e-mail is started at most five minutes after the alert occurs. However, there can be a delay before the e-mail is sent to external e-mail addresses (that is, addresses of users that are not defined in client 000 of the same SAP system), depending on the settings in SAPConnect.
The message text contains the same information that is displayed in the Alert Monitor:
u2022        Description of the problem that exists
u2022        Time and location at which the problem occurred
u2022        Severity and colour of the alert
Prerequisites:-
SAPConnect must be configured in client 000, if the message is to be sent to an external address.
Procedure:-
Choose CCMS ® Configuration ® Alert Monitor, or call transaction RZ21.
In the Methods group box, select Method Definitions and choose Display Overview.
Select the method CCMS_OnAlert_Email_V2 and choose Edit Data.
Choose change mode with the Display « Change pushbutton, and choose the
Parameters tab page.
Fill out the fields as follows:
Parameter     Meaning
SENDER     SAP username of the person in whose name the e-mail is sent Alert Monitor.
u2022     Start the desired monitor from the list by double-clicking it.
u2022     Select the desired node and choose Properties.
u2022     The Monitoring: Properties and Methods screen appears. The rest of the procedure depends on whether the analysis method need to be assigned only to this node or to the entire MTE Class.
u2022     Choose the Methods tab page and then choose the Method Assignment button.
u2022     The Monitoring: Methods screen appears. Choose change mode with the Display « Change button, and choose the Auto-Reaction tab page.
u2022     In the Method Assignment group box, choose the Method Name radio button and enter CCMS_OnAlert_Email_V2 in the associated field.
u2022     Save the entries.
Related Notes
u2022     SAP Note 0176492
Troubleshooting of the configuration of CCMS On Alert Email:-
1.     The SAP Connect configuration in 000 client
2.     Check the recipient & sender e-mail id is configured(attached to a user id) in client 000
3.     Simulate the CCMS alert and check the Sap Connect trace
Completing the Alerts:-
The alerts are completed after checking the alert. Basis Team needds to complete the alerts
Deleting old CCMS alerts:-
You can use program RSALDBRG to delete old alerts.
Hope this helps.
Thanks,
Sushil
Edited by: Sushil Suryawanshi on Mar 19, 2009 12:49 PM

I am going to buy a bigger hard drive. i am operating on Lion. how do i install my os on the new disk? i can't use time machine.

i am going to buy a bigger hard drive. i am operating on Lion. how do i install my os on the new disk? i can't use time machine.

Plug this new drive as an external drive, boot from lion recovery "command-R" more info here: http://www.apple.com/macosx/recovery/
Open disk utility, format and partition the disk at your will (allways Mac OS plus...) and go ahead with the install, don't care if it tells you to whait thousands of hours, I did get installed in 2 hours and a half last week.
If you can't plug the disk as an external one, you'll have first to do an USB disk recovery utility, as easy as download the recovery utility and install it in an USB disk, you can find anything from the link above, plug the disk as a single master, and boot from the USB you created before.
Tell me how it went!!!

Hard Drive died, ordered new one. How do I install a OS on it?

So my hard drive just died on my mid-2010 MacBook Pro so I ordered a new SSD off Amazon. My question is, how do I install Mountain Lion on my new SSD once I replace the dead one? I don't have a CD, but I did have Mountain Lion on the old hard drive before it died. Will "Internet Recovery" still be an option with the new SSD? If not, what's the next best way to install an OS without having to repurchase a CD or USB?
Thanks in advance!

If you had your MacBook updated to the most recent version, you can use Internet Recovery to reinstall OS X > http://support.apple.com/kb/HT4718 Note that Internet Recovery is included in the firmware of the Mac, so you don't need OS X installed to use it.
To start in Internet Recovery, hold Command, Option (Alt) and R keys while your computer is starting, and selec the option to reinstall OS X. If you can't install it in the hard drive, close the installer, open Disk Utility and format the SSD in "Mac OS Extended (Journaled)" to be able to install Mac OS X

How long to recive new install disk

can anyone tell me how long you have to wait for new install disk as ive been waiting over a week now with a imac icant use. im glad i kept my windows pc im not very happy with apple having said that its nice looking paper weight.

On August 24 I requested one 15" PB G4 battery replacement and two 12" PB
battery replacements. Received two e-mail confirmations from Apple.
Within about three weeks I did receive the 15" PB replacement battery.
The two 12" PB replacements have never showed.
It would be nice if Apple could put up an announcement giving some indication when these batteries will ship.
BTW, I've continued using the bad batteries because I don't have another option. So far their behavior is 100% normal.

How to new install on one disk?

Similar Messages

Maybe you are looking for