How to normalize all audio clip volumes using iMovie (2013)?

Normalizing clip volumes was very easily accomplished in previous versions of iMovie, but this feature appears to have been deleted in iMovie (2013), a.k.a. version 10.0.3.  My project is a simple slideshow with songs added from iTunes, but the volume levels of the songs are all different, and it would be nice to be able to automatically normalize the volumes for all of the songs.  Any advice would be appreciated!

The normalize volume feature is indeed gone.  You have to adjust manually, selecting the audio track of each song in turn.
Geoff.

Similar Messages

  • How to normalize all audio takes?

    recently i recorded lots of takes (vocals), but problem is they all have different volumes (my first experience working with a singer). what is the best way to flatten them all to an average volume inside logic (or not as a last resort)? i tried to assign a bus as output for all these audio tracks and compress all of them together, but the volume difference is still exists. in addition i should say that there are about 5 audio tracks and about 10 takes/comps in each one which i'm going to flatten.
    next question is - i try to cut a piece from a record take and raise a gain in inspector, but when i do, it doesn't affect a sound, why nothing happens?

    I'd suggest you automate the levels up or down where needed, or try the gain plug in ( which again will need some automation). A case of using your ears as well as a metering plug-in.

  • How to Delete several Audio clips from Video clips on Timeline of APPro CS5

    I  would like to know how to delete multiple audio clips from Video clips at once in time line in APPro CS5? Please advice step-by-step procedure. I can DELETE audio from a single Video clip. But I wanted to DEL Audio from multiple video clips. Your help is much appreciated. Thanks

    Thanks for the advice given by Shooternz, Colin and Jim. Your help is much appreciated for a beginner like me... Jim's idea was also good..It worked for me and also safe if I need to use the original audio. Following method also found good...but previous audio clip cannot be extracted after deleting it. ... 1. Hold down "ALT" key first then select the first audio clip in the chain of video clips to Delete. 2. Hold down " Shift + Alt " keys together and click right mouse button on all audio clips to be deleted one by one. Make sure only audio clips are selected. 3. Then release ALT+Shift keys and then click right mouse button and select "Clear" from pull down menu to Delete all selected audio clips on the time line. This method works very well for me. Thanks for every one who has adviced me how to do it. Thanks guys... If u all find better method tha above...please inform us. Thx.

  • How do I lock Audio clip at playhead in iMovie

    Hi,
    I have been using iMovie HD for years.  Great program.  Finally had to move on to iMovie 10.  What a total disaster that is.  I have a myriad of issues with it, as does everyone else, but right now I am trying to figure out how to lock an audio clip at the playhead, as one essentially needs to be able to do for even pretty simple home movie edits.  Am I being stupid or has this functionality been entirely removed by some genius Apple programmer?  Why do I get the feeling that what used to be a brilliant and intuitive piece of software has been  completely eviscerated to the point of uselessness?
    Any ideas?  Thanks
    Richard

    Richard Weston-Smith1 wrote:
    Am I being stupid or has this functionality been entirely removed by some genius Apple programmer?
    No, it's not been removed. You just need to drag your audio clip to the right place.
    In your case, you want to drag it directly to the timeline and not to the background music well below the timeline.
    Some more information here:
    http://help.apple.com/imovie/mac/10.0/#mov91a895a64
    Matt

  • I have file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method?  alternate method? I have Adobe Ac

    I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method?  alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.

    Yes, I just want to cover up all the pages for those particular area of document numbers.
    Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
    So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.

  • How to get all video clips to the organize at the same time

    Hi,
    I am a new user and I wonder how to get all video clips to the organize via Get Media or ?? at the same time. Now I have got it one after another and it is very slow.

    My meaning is  to get the clips from hard disk folder. No one after another but all the same time.

  • Encoding just a part of a long sequence - ALL audio clips are processed ?!?

    I have a 60 minutes sequence - among other stuff, it has about 30 audio clips.
    When I define my work area to be - let's say 45 secs and _Export_Media to AME, all audio clips from the source sequence are processed, what is  time-consuming and boring.
    Is there a way to avoid this ?

    Yup.

  • Where can i find a tutorial on how to use iMovie 2013 version?

    I've been making some clips anywhere from 6 seconds to 15 seconds long, and I just wanted if there are any good links on how to use iMovie 2013 version. I've looked on youtube but everything on their are old clips or small clips on how to run the program. I'm not an advanced user but i've picked up some of the basics on iMovie. I just want to learn the basics and advance onto the harder setups with iMovie. Any help with this would be greatly appreciated.

    http://www.youtube.com/watch?v=4RZ7jGSk60I
    http://www.apple.com/support/mac-apps/imovie/
    LOTS OF Imovie video tutorial vids here:
    http://www.izzyvideo.com/imovie-tutorial/

  • I'm trying to crop individual frames. Can this be done without the crop being applied to the entire clip? Using imovie 11

    I'm trying to crop individual frames. Can this be done without the crop being applied to the entire clip? Using imovie 11

    use the cmd-B(lade) command to split your single clip into individual ones

  • My volume key not working volume increase automatically, how to mute all audio

    my volume key not working, volume increase automatically if i go to audio settings i can adjust, but  again volume increase automatically , how to mute all audio

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comeback again?
    If this does not boring back a working volume control, and to rule out a software issue, set it up as new device, explained here:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If still no luck, you'll have to get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
    iPhone - Contact Support - Apple Support

  • How can I incorporate several video and audio clips into one iMovie project?

    Hello all.  Basically, I'm trying to solve a problem before it becomes one.  I'm going to put together a short iMovie project for a thank-you dinner.  Several people from out-of-town will not be able to make the dinner.  I want to give them the opportunity to "speak" by having them put together a short video or audio clip.  I then need to gather up all the clips and put them together in one iMovie project.  I guess I'm looking for some assistance in terms of format, what types of files/formats to use, etc.  I've done a few movies (mainly from still pictures -- glorified slideshows with music).  But, I'm still a relative neophyte when it comes to the computer world.  Any assistance would be greatly appreciated.  (feel free to point to a "How to " tutorial if there's a good one out there). 
    Thanks.

    your problem will not be the process of 'glueing stuff together'
    follow advice given here
    http://www.apple.com/support/imovie/
    under 'Getting started' or follow the 'Video' tutorials ...
    the real task is, to make all clips readable for usage in iM ...
    before making you a technician on video-codecs:
    download and install the free tools Mpeg Streamclip and Perian.org
    you have to relaunch your Mac after doing so...-
    BEFORE adding any of your external sources into an Event, use Streamclip to manually convert to DV, or if source is HDef, to Quicktime/Appleintermediate.
    the resulting files should import flawless into iM, proceed as usual.
    iM 'swallows' a lot of formats, so it could be this manual conversion isn't needed ... 
    don't hesitate to come back here, if probs occur ...

  • How to make an audio clip sound like it is on a radio?

    I have an audio clip and I need to mess with it to make it sound like it is on the radio, how do I do that?

    Hey Pat
    "The new system for discussions asks that after you mark your question as solved, you take the time to mark any posts that have aided you with the helpful tag and the post that provided your answer with the solved tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well..."

  • How to move all thumbnail clips into project library for editing?

    Hi there ...
    I haven't used imovie 08 for quite a while ... and I've forgotten how to do a major step .. which is leading to a lot of frustration. I need to drag all my thumbnails into the project library and have them available for editing. ANy way I try it now .... it seems to create one big clip in the project library .. so when I want to add a title or something ... when I drag it over to the clip ... it selects to add to the whole movie. Somehow I need to retain the individual thumbnails or clips ... so when I try to add effects it is just added to one clip ... not all of them ...
    I had this problem before and I can't remember how I moved all the separate clips from the event library to the project library and had them retain their individual clip format available for edit...
    CAn anyone help me .... thanks ....

    Hi,
    This is a shot in the dark but: if it is anything like 09 there is a little slider in the bottom right hand corner of the project window which, if it is all the way to the right will only give you the whole movie.
    Pull it to the left to give you different thumbnail settings.
    Hope this works.
    DM

  • How to record an audio clip in Premiere Pro cc with USB mic on PC

    Hey All,
    Having trouble finding a solution on the web. I have just made the switch to Premiere Pro CC from Final Cut Pro 7, and also from Mac to PC, yikes I know. I am looking to record some audio clips directly into PP with my USB mic. I have successfully hooked up my usb mic through the PC control panel. My ignorance will be apparent here, What should I do next in Premiere Pro to begin recording my clips?

    https://helpx.adobe.com/premiere-pro/using/recording-audio.html
    NEW! Voice Over record feature in Premiere Pro CC 2014 - YouTube

  • How to get around audio clips' audio changes not working

    Here is how I got around the annoying (and recurring) problem of audio clips not being adjustable. First, it's a good idea to add your music track as the very last thing you do. Often, when I am editing a video together, as soon as I drop in a full length music track, I'm no longer able to make changes to my audio clips. So now I drop in the music track as the very last thing I do to my project. If I want to test a music track in the file, then I drop it in, press Command G to preview my project, and when I'm done previewing the project with the music track, I immediately press Command Z to undo the addition of the music track. If, for whatever reason, I'm still having problems with audio clips no longer updating changes I make to them, I have discovered a trick that works: make the changes to the clip's audio, then copy the clip, then delete it, then paste it. The pasted version should now have the updated audio adjustments. Worked for me, anyway.

    Hi,
    Have you tried the very first link ? Please try it now if still no luck please use    Scan now    from the following link:
       http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=5318926
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for