How to Not Display Exact Duplicate Rows in Report

I have a report that displays many duplicate rows where all fields in several rows are exact duplicates. I would like to know how to make it so that the entire row does not show up if it is an exact duplicate of another row. Any ideas? Thanks.

I literally have been pulling my hair out for the past 3 days with the same issue. I'm new to SSRS. I created a new report where I basically only wanted to show order header info, but unfortunately, some of the info I need to show at the header
level is only kept at the detail level. So, when I linked the order header to the order detail (one to many) I got a duplicate row for every line that was in the order detail. I tried to group just by order number (thinking it would roll
all the dups up) but that didn't work. Doing a group on all the fields on the report did the trick.
I owe Mainiac007 a beer!!!! :)

Similar Messages

How do you display exact duplicates in Itunes 11. It is now missung under the file?

How do you display exact duplicates in Itunes 11. It is now missung under the file?

Right-click on this direct link to ExactDuplicates and "download" or "save link as..." to a location of your choice. Double-click to the file to run it. You should get something a bit like this:
If your system will allow it my script will produce a progress bar so you can see what is going on, otherwise you will have to be patient, it will carry on working in the background.
After scanning for duplicates it then adds them to a new playlist. For large libraries this process can be quite slow. (Very slow if you also have old hardware like me.)
Finally you'll get a results window like this (from a different test run, as I didn't have time for the full one to finish when I was grabbing screenshots).
You can use shift-delete to remove selected tracks from the library as well as the playlist. Leave at least one track behind from each repeated group and don't send anything to the recycle bin unless you are sure you have more than one physical copy.
The DeDuper script has several advantages over cleaning by hand. Automating the process allows preservation & amalgamation of ratings, play counts, playlist membership, etc. See this thread for more detail.
tt2

HT2905 My itunes looks nothing like the examples in this tutorial. I do not have "display exact duplicates" or "date added". Can someone please help me remove duplicate songs? Also, I downloaded two audio books and they are showing up in my song list.

My itunes looks nothing like the examples in this tutorial. I do not have "display exact duplicates" or "date added". Can someone please help me remove duplicate songs? Also, I downloaded two audio books and they are showing up in my song list. Why???

'Show duplicates' is now under the 'View' menu. To see the 'Date added' column go to 'View options' from the 'View' menu and check it in the section under 'Stats'.
Click an audiobook once to select it and hit command-i (Mac) or control-i (Windows). Go to the 'Options' tab and set 'Media Kind' to 'Audiobook'.

HT2905 I do not have the so called "display exact duplicate" option... what do I do? I just updated itunes the other day. Yeah, I'm not happy!

I do not have the, so called, "display exact duplicate" option... what do I do now? I just dowloaded the new version of itunes the other day... yeah, I'm not happy!

Option + View > Show Exact Duplicates

How to not display nodes in a tree if Oracle roles are NOT used?

How to not display nodes in a tree if Oracle roles are NOT used?
We don't use Oracle DB roles to grant users access to Forms from the menu. We use a template and role system of our own. Basically a few tables with templates and roles.
We want to convert our normal Forms menu to a tree menu and one of our key requirements is that when the tree is populated ONLY nodes with programs (i.e. forms) he has been granted to execute is shown.
Since we don't use Oracle Roles how to do this in a tree?
I created a function to show/hide LEAF nodes, BUT problem is that there are sub-menu nodes showing even if the leaf-nodes under it has not being displayed. My function has suppressed it.
My tree query is like this:
SELECT
     t.status, LEVEL, t.label, t.icon, t.node VALUE
FROM
     tma_tree_menu t
WHERE
tma_authenticate_sys_chk_role(USER, t.node) = 1
CONNECT BY
     PRIOR t.node = t.master
START WITH
     t.MASTER IS NULL
ORDER SIBLINGS BY
t.position
The tma_authenticate_sys_chk_role will return 1 only if the user has access to the form under that node.
I tried the FTree functions in Forms but even that has nothing.
Any help would be greatly appreciated.
Edited by: Channa on Mar 17, 2010 6:49 AM

Would you share the source code? I guess what I need is how exactly you retreive the user credentials from the DB table and set that boolean variable.
and then how to condition it in UIX?

How do I delete exact duplicates in my library?

How do I delete exact duplicates from my library?

@Blouwagie:
You should always make a bootable backup BEFORE you do major updates.
If things go wrong you can always revert to what you had previously.
You can do this with Carbon Copy Cloner or Super Duper. (I use CCC for a long time, and I'm very satisfied about it, I can recommend it)
It used to be donation ware, but now you need to pay a small fee. Not a big price for always knowing you're safely backed up.
If you don't have a bootable clone from before the update, and would like to revert to 10.7, check this:
https://discussions.apple.com/thread/4560565
seems to work.
didn't need it myself since I waited to update, I always check this forums first to find out what are the issues/bugs. When there seems to be none or little problems, I update. I've learned my lesson long time ago. Patience is a good thing...
So, always backup. More important than your changing underwear daily. Time machine isn't enough. Make two bootable clones. One at your place and one at a different location (theft, fire, ...), you can always revert from there.
+Send Apple your feedback.
http://www.apple.com/feedback/itunesapp.html

HT2905 When I click File, I don't see Display exact duplicates. Help!?

I tried following the instructions in the Apple support forum for removing duplicates in iTunes, but I got stuck very quickly. When I click File, I do not see the option of displaying exact duplicates, which is what the Apple fourm suggests. Advice welcome.

Thanks Kappy. I had just found it but thanks reply. Next question is: Is there a quick way to then delete the duplicates without having to select each one and delete?

HT2905 Display exact duplicates is grayed out - cannot access

When I go to View, Display Exact Duplicates, it is grayed out - cannott access. Even if I could access, will it give me option to delete all duplicates?

Make sure you have updated to iTunes 11.0.1 (or later).
Enable the menu bar with ctrl-b if needed
Use Edit > Preferences > General > Show list views for all media
In Music use the Songs view, or select the List view for other media/playlists
Use View > Display Duplicates or, more usefully, hold Shift and use View > Display Exact Duplicates.
Keep one of each repeated group of files and don't send to the recycle bin unless you are sure that there are multiple files on the disc as opposed to multiple entries to the same file.
There is also my DeDuper script if you don't want to do it by hand. This can preserve ratings, play counts, playlist membership, etc. which are lost in a manual clean up. Please take note of the warning to backup your library before deduping. See this thread for background on deduping and the script.
tt2

HT2905 I want to delete duplicates from my iTunes music but cannot see "Display Exact Duplicates" in File menu.

Hi,
I want to delete duplicates from my iTunes music but and iTunes help says to click on "Display Exact Duplicates" in File men but I don't appear to have this function. Where else can I look?

Thanks Kappy. I had just found it but thanks reply. Next question is: Is there a quick way to then delete the duplicates without having to select each one and delete?

How to not display the messageField in an IconItemRenderer

Hello,
how to not display the messageField in an IconItemRenderer, just display labelField and icon.
Thanks

If you're using JavaFX 8 you can use the following in an external style sheet:
.table-view .column-header-background {
-fx-pref-height : 0 ;
If you're using JavaFX 2.2, the -fx-pref-height attribute is not available in css, so I think you have to resort to a lookup:
final Region tableHeader = (Region)table.lookup(".column-header-background");
tableHeader.setPrefHeight(0);
As always, I feel obliged to point out that I don't really like lookups. Sometimes they seem to be the only way, though.

How can I delete exact duplicates other than one at a time.

How ca I delete exact duplicate songs other than one at a time.

I've written a script called DeDuper which can help remove unwanted duplicates. See this thread for background.
tt2

How can i reorder the columns in the do not display section of the interactive report.

Hi,
My interactive report contains 185 columns, and the user requieres to build his customized reports with some columns, but the he gets lost between this amount of columns, this would be easier if the columns in the do not display section of the interactive report would be sorted automaticaly, Is this possible?
Thanks a lot,

Hi Eva,
One solution would be to order the column names alphabetically. You can create a JavaScript dynamic action to handle the sorting.
The shuttle of the IR attribute "Select Columns" have the ID's "apexir_SHUTTLE_LEFT" or the Hidden colums and "apexir_SHUTTLE_RIGHT" for the displayed columns.
The function you'd need to create would look like:
var options = $('select#apexir_SHUTTLE_LEFT option');
var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get();
arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; });
options.each(function(i, o) {
o.value = arr[i].v;
$(o).text(arr[i].t);
var options = $('select#apexir_SHUTTLE_RIGHT option');
var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get();
arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; });
options.each(function(i, o) {
o.value = arr[i].v;
$(o).text(arr[i].t);
You'd need to find the propper timing for the dynamic action to run, I guess click of the button "Select Columns" would do the trick.
Regards,
Vincent
http://vincentdeelen.blogspot.com

How to identify display and navigational attributes in report?

To all of thanks to be in SDN, plz send tue clarifications.....?
Q. How to identify display and navigational attributes in report? is there any naming convension differences for both of them?

This works fine for "powerusers", but for informational users you have to create your own naming conventions for all navigational attributes which are not unique. For example 0COUNTRY may be a navigational attribute of 0CUSTOMER, OSOLD-TO, 0SHIP-TO, 0BILLTOPRTY, 0PAYER. To make the text clear for your users in reports name it CS Country, SO Country, SH Country, BT country, ... as 0COUNTRY could also be a characteristic from the document.
This means quiet some work especially if you have a multilingual installation, but the information users will be very thankful.
hope this helps
mich

HT2905 Display exact duplicates does not show in my FILE options

When I click on file I do not get the exact duplicate choice

Make sure you have upgraded to iTunes 11.0.1.12.
The features are now View > Show Duplicate Items and Shift > View > Show Exact Duplicate Items.
I've written a script called DeDuper which can help remove unwanted duplicates efficiently. See this thread for background.
tt2

How to not have songs duplicates in app remote? I have playlists for my iphone and playlists for my pc. All songs of my iphone are also on my mac. When i use the remote app, it plays everything in double.

Dear all,
I am using itunes to control all my music and i like to use my iphone, or my ipad to control my music with the remote app.
But i have a problem: all the music i have in my iphone count as double play.
To explain everything since the beginning, i personally don't like and don't trust at all the music sync capability of itunes.
So i have my music on my pc, and i load every type of music as a single playlist (ex a Pop-Rock folder, with all artists folders and so on, makes me a Pop-Rock playlist).
For my iphone, i created a iphone music folder, with the same classification.
It means that i don't have all my Pop-Rock music, only a selection. But of course the selected music appears also in my complete music collection.
So in itunes i created a folder playlist named iphone music, with inside one playlist by type of music (exemple : Pop-Rock, which contains some files of my main Pop-Rock collection).
So i do have duplicates in my hard drive. But when i selected the playlists to be shared on home sharing in itunes, i selected only the main playlists, not my iphone playlists! But still, when i look for ACDC artist for example, i should see only what i have on my pc, not what i have also on my iphone.
The result is if i play an album for example Back In Black (i have it full on my hard drive, and full on my iphone too), then every song is displayed in remote app in double, and also played in double:
Here is how it is displayed:
Song 1
Song 1
Song 2
Song 2
So the remote app plays Song 1 one time, then Song 1 (the second Song 1) one time and continues like this to Song 2 etc...
I guess that if i put my selection of songs on my ipad, i will then have everything in triple....
It is very annoying. Is there a way for me to change that? Or for an update to be made (based on ID3 Tag) to not play everything twice or more? It would have an ID3 Tag No Double toggle button.
I don't want to select from my main music to send elements to my iphone as doing that i lost a lot of music multiple times. This way of doing is not safe at all (at least for me).
What is possible to do? Is there room for improvement here (i believe so). Is there a way for me to avoir this very annoying effect?
I would really like to put my music to my iPad2 also, but after i'll have triple play....
Thank you for your help.

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

How to Not Display Exact Duplicate Rows in Report

Similar Messages

Maybe you are looking for