How to not include the path when creating pdf from many html files?

I use "Merge File into a Single File" to create a pdf file from many html files. However, the generated pdf file have the path information of the html files. I'm wondering how to generate a pdf without the path information.

Go to CREATE > Create PDF from Web Page > Click the SETTINGS button on the dialog that follows > Uncheck "Place headers and footers on new page".
Thanks!

Similar Messages

When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks

When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks. I used to be able to do this in WORD 2003. I tried to create a PDF from Acrobat by selecting File > Create PDF >navigate to the WORD file > select three checkboxes >
Any help with getting the TOC heading entries as hyperlinks?

Try to do it from Word using the ribbon.

I recently updated to the latest Mac OS, and have lost the capacity to create PDFs from my HP scanner. Any suggestions?

I recently updated to the latest Mac OS, and in the process I seem to have lost the capacity to create PDFs from my HP scanner.
With each prior OS, I could scan and immediately save any scanned file in PDF format. Now it is not allowed, and creates a file
that has nothing but noise, even though the scan software seems to show that each scan is captured correctly (in the scan window,
before I ask it to save the file). When trying to save to PDF, I get a message that tells me that this is a read-only file, which I don't
quite understand, since the same scanning / saving process always created a PDF in the past.
iMac 27 inch----HP Officejet 7310
Any suggestions?

Thanks very much for the response. I checked for new HP software, and learned there is no new version. I also noted when reading about the new OS 10.9 that all driver software is now part of the MAC OS and no longer supplied by the vendor of the printer / scanner. I suspected this is where the trouble is located.....but I did not know how to ascertain what could be done to restore my PDF creation capabilities. The next message below yours had the solution, so all is well now. Now you know as well-----Many thanks again for taking the time to respond!!

TOC not updating when creating PDF from Robo9

I have not really created PDFs from Robo before, so I might be missing something basic. I am trying to create Word and PDF documents from my Robo9 project. My problem is that some of my topics are not being generated, in either the Word output or the PDF output. The topics are indeed part of the TOC in the Robo project, but they are not part of the TOC in the Word and PDF output. The strange thing is, all of the TOC books make the conversion, but the one book I am having the issue with includes one topic, but all of the other topics in that book do not get converted. I tried recreating the TOC, and it still does the same thing. It's almost like the printed documentation generation is ignoring any new changes to the TOC, as it's the same every time no matter what I change. I tried making some changes to topics that are generated, and I can indeed see the changes in the printed output docs.
Anything glaring I am missing, or should try? Thanks.
Mark

Likely a common misunderstanding.
The first time you create printed documentation, the topics are based on the TOC. Thereafter there is no link.
When you add new topics to the project, they are not automatically in any of the TOCs. You have to add them to each TOC. It's the same with print, you have to add them in the print layout.
Easiest way is to simply use the double left chevrons to remove the topics in the print layout and then use the double right chevron to back in, the difference being it will add all the topics in the TOC and as you added the new topics there, they will be in the print layout.
There's more in Printed Documentation on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Acrobat 9 Quits When Create PDF from Scanner Selected

Hi. I wonder if anyone can advise please.
I have recently installed Acrobat 9 on my MacBook Pro and have plenty of RAM. However, I can "Create PDF from Scanner" just the once. After that, Acrobat quits when I select Scan or quits if I cancel the scan.
I have tried the following:
1. Troubleshoot System Errors & Freezes
2. New User account
3. Recreated Preferences
4. Booted from separate disk
5. Repaired disk permissions
6. Have no third party plug-ins installed
7. Have run Repair Acrobat
8. Changed Universal Access
9. Defragmented disk & repaired files
10. Safe Boot and reinstall Acrobat
Nothing has worked except when I clean install I can scan through Acrobat once.
I can scan from the scanner software - Lexmark 4850 - with a jpeg straight to Acrobat but want to try to solve the issue of scanning straight from the app.
Thanks for your help people.
Regards
Paul

After I discovered my problem of quitting after completing the scan of the first side of a 2-sided document and decided to go to Adobe for help, I should have known I was in real trouble after following their instructions for locating the Acrobat serial number. After bringing up the splash screen and clicking on it, instead of seeing the number the splash screen disappeared! So I had no option but to use the phone. Then their help person couldn't give me the serial number- he had to transfer me- and I chose to stay with him for help instead. He decided it was a conflict between the Acrobat & HP software and ended the help session.
I then did some on-line research and discovered others with the same problem, and came up with the comparison test with the Windows version. Adobe's phone system didn't recognize my Case #, but the second Help person said it worked fine. At that point, I got the feeling that I was in real trouble. After another hour going over the same ground and repeated denials that their software was at fault, the Helper refused my request that they do a Windows comparison test or send me a Windows version to test myself and promised to call me back with results of their "research". That call never came.
On the third call, again with the Case # unrecognized by the phone system, the Helper was even more unhelpful, probably after reading the record of the first two calls. He insisted on going back to the machine and over the same ground once again, and I ended the call.
I agree that the on line approach is better, and I may have to make a double call to get the serial number (neither of the two I have, each different on the case or on the CD worked) and try that if my request for a supervisor fails. Fortunately they are so incompetent that they can't track starting over.
I'm not a programmer, but have lots of varying experience with computers dating back to the first Atari-400. Since your Acrobat uses only the Twain driver component from your scanner software, the first place to look for a problem is in the Acrobat software, especially since the software doesn't run again after the first use without reinstalling, and the scanner continues to perform properly using it's installed software. The Windows comparison test such as Tim Whitfield was able to make, would clearly establish the Mac version of the Acrobat software to be at fault, but would still not resolve our problems. Unfortunately I hold out little hope for either you or I with Adobe, since neither their phone nor the online help has come up with a prior fix. This indicates a bug fix requirement, which for something like this looks to be a relatively long time in coming.

Document size changes when creating pdf from jpeg

When I create a pdf from a jpeg file, the document size increases considerably. The native jpeg was saved in the "save to web" feature in Photoshop. I cannot find settings in ImageReady or Acrobat to make my document the correct size. Any suggestions?

Why not save the PDF from Photoshop directly? This gives full control
over compression settings. It will not, however, downsample so you
should do that first.
Aandi Inston

Acrobat 8.1 Crashing when creating PDF from webpage

www.sec.gov/Archives/edgar/data/910569/000091056909000016/form6-k15june09.htm
I have been trying to create a PDF from the above URL using Acrobat 8.1 using the "Create PDF from Web Page" function. The Download Status form opens and shows the progress as files are downloaded and converted. However Acrobat 8.1 always crashes before completing the task. Acrobat 5.0 successfully completes the task although the formatting leaves a lot to be desired but that's another issue.
I've tried various values for settings such as processing 1 level or getting entire site but the crash is consistent.
I have also tried a couple of other machines in the office with the same crashed result.
Can anybody suggest why Acrobat 8.1 would fail to render this URL into a PDF and what would cause it to crash so consistently? Is there an alternate method of creating a PDF from this URL aside from loading it into Word and printing to a PDF?
Any clues appreciated!

The problem is likely that the web page does not conform to standard HTML. AA8 crashed on me also. You can print the file from your browser. The only thing that would be missing would be the 3 links near the bottom and they are easy to add.

Using Aperture to create a slideshow why would it not include the captions when burnt to CD?

I am trying to burn a slideshow to CD but when I do the captions I have included are not shown. Anyone got any ideas what I am doing wrong or not even doing? Any suggestions would be helpfully.

I am trying to burn a slideshow to CD but when I do the captions I have included are not shown.
How are you burning the Slideshow to CD? Are you using the "Export" button in the Slideshow view to render a video of the Slideshow, or are you exporting the images of the Slideshow using the "File > Export" command?

How do I include the SerialNumber when silently installing Framemaker 8?

I am trying to deploy Framemaker 8 within my company, and need to find out how to deploy the application silently with the Serial number packaged with the install.
I know that the ABCPY.INI file has in it the fields needed for including the serial number, but I am unable to locate ANY documentation anywhere to with directions on how to use this external installer.
I try to run setup.exe /v ABCPY.ini and various other Command Line guesses, to no avail.
Please help! Thank you!

Thank you for your response Arnis. The documentation does not work for release 8. I just retested it once more this morning with no luck.
This is my command line (private data cleared):
MSIEXEC /I "Adobe FrameMaker 8.msi" SERIALNUMBER=xxxx-xxxx-xxxx-xxxx-xxxx-xxxx COMPANYNAME="My Company" USERNAME="My Name" /qn TRANSFORMS=1033.mst
The product does install silently, as it is an MSI still. However when I launch the program it requests the serial number. That is the part I am trying to work around. I can't have my end users getting prompted to insert the serial number :)

How do I use "Trim Paths" after "Create Shapes from Vector Layer" on a strokes only layer?

Hello,
Adobe After Effects CC
2014.0.2
Version 13.0.2.3
I have imported an illustrator file that was created in Illustrator CC 18.0.0. The file contains the outline of a logo. It is the logo with the fill set to none and the stroke set to 1px.
I drag the logo_strokes.ai file onto the composition, right click, and click Create Shapes from Vector Layer.
A new layer is created and in the Contents "drop down", a Fill 1 layer is created.
When I select the Contents "drop down" and click Add / Trim Paths, a Trim Paths 1 layer is created.
When I animate Trim Paths 1, it appears to animate the Fill layer, not the stroke.
How do I get it to animate just the stroke, and not show a fill at all?
Thank you.

Thanks,
I am reading and watching tutorials. Still stuck on that one point.
Here are the images of the After Effects layers. The illustrator layer is the top layer.

How do I find the path to a pdf file I have found in Spotlight?

I downloaded a pdf file, and a few days later couldn't remember where I put it on my HD.I found it easily using spotlight, but that brings up the file as a full pdf in Preview, and I can't see any way of finding the patrent folder, or the path to it, so I can find it again or move it. How do I do that?
Thanks,
Richard

I just found the answer myself - https://discussions.apple.com/message/17196624#17196624 .
I agree with the comments in that thread - not at all intuitive!
Richard

How to remove 'Outlines' default text when creating shapes from vector layers?

Hello everyone!
You know the text it adds to the name layer when you create shapes from a vector layer that says Outlines? Well, anyone know if it's possible to change it or remove it?
It sucks to have to remove it manually, especially when it's a lot of layers and you've taken the time to do the prepping in illustrator.
Thankss,
Oliver

if I have an illustrator layer that is named icon and I convert it to outlines I get a layer that is named icon Outlines. Are you trying to remove the word Outlines or are you getting just a layer that says Outlines? Personally I would not remove the word Outlines from shape layer because this would differentiate it from the original and let me know at a glance what's going on with the layer and the project. This would be valuable information if I were to return to the project a year later for modifications.

How do I reinstall the OS when I upgraded from a download?

Like I said, I upgraded to 10.4 from a software update download - no disks involved. Which leaves me in a bind here when my finder crashes and won't launch, no matter what. I tried an archive and restore from Disk Utilities from my old 10.3 install disk, but that won't work, as it can't restore anything above 10.3, understandably enough. So I figure it will work if I do it from a 10.4 disk, but I don't have one. My only other option is to shell out for an external drive, and do the whole clone, wipe, and clone back option. But even if I did that, how would I reinstall 10.4? So would it be possible to get a free Tiger install disk from Support to use its Disk Utilities, given my current plight and seeing as how I've already bought it? And if I can't and have to go with an external drive, how would I go about reinstalling the OS anyway?

Tiger as an upgrade to Panther was never made available online via a download. If another user downloaded it from an online site, it probably was a place where they pirated a copy of Tiger that was hacked. Therefore any instability is because you have a pirated copy of the software. Get a legal copy of the software, and then we'll be able to help you. Please read the terms of use as far as participating in illegal activities. Tiger is only licensed for use with the machine that came with it, or the retail version that you purchase at a store or through the up to date program which only was available for Macs made from April 8th to April 29th, 2005. Anything else is an illegal version of Tiger. Speak to that other user and find out what their real source was. If you bought a retail copy from them, be sure they have gotten rid of any copies of their's.
The term "Download" means it was gotten off the internet, and therefore why we have any consternation trying to help you. Tiger was never made available as an internet downloadable product for Panther installations. Updates to existing Tiger installations were made available via download. But you are saying you updated Panther via download, which can't be done legally.
Disk Utility is not available stand alone.
Why do you say getting the retail versions are out of the question now? The retail version is available from any of a number of retail outlets and they do work with with all G4s, except those that came with a newer version of 10.4, in which case, you want to call AppleCare for the original restore disks if the original owner of the G4 lost them.

When creating PDF from web page why does text appears as strange font not readable?

I am using Acrobat Standard, ver. 9.5.5. Frequently if I save a web page on either Firefox or Internet Explorer by printing to my Adobe PDF driver, much of the text is rendered in a strange font rather than in the font that appears on the web page. The only work-around I have found is to print the document to a printer and then scan the printed page to create a PDF. Is there a solution to this problem?

The OS may be an issue so what are you using Win7, Win8, XP, MAC, or other? In printing, what job settings are you using? When you open the PDF, check the properties (ctrl-D) to see if the fonts are embedded or not. The problem is likely related to the font not being embedded. The embedding may be a license issue for the font. Acrobat will only embed fonts that are properly licensed. You might try the Print or Press job settings that are a bit better to embedding all fonts.

How can I include the Header Information....for a File to IDOC Scenario

Hi,
I made a File to IDOC Scenario with DEBMDM06 for MDM>XI>SAP R/3. The Header Information in the XML File which is at the XI end is Missing. For that reason In Tcode SXMB_MONI we are getting an Error that <b>"HEADER Information Missing: Message should Start with EDI_DC40"</b> i.e the Header Information.
My Question is that whether we can do some changes in the Message mapping Step in the Integration Repository. I HardCoded the Few mandatory Fields that were there but it Again gave me the Same Error as above.
Can you please Suggest some Solution for this. Since the data is Coming in from MDM part the Header information is not there but It actually Important as it has got all the Port Information.
Kindly Inform me some Solutions.
Thanks & Regards
Somnath

Hi Suraj,
Thanks for ur Reply, but Since we are Doing a File to IDOC Scenario the IDOC DEBMDM is on the Right Side in Message Mapping and as U know it is Mandatory to Map an IDOC on the Right Part. EDI_DC40 is coming as it is there in the IDOC but our XML File Does not have that. If we Don't Map then it Becomes RED, which is an Error.
Furthermore in the Receiver Agreement we have put the Necessary Details such as Sender Service and Receiver Service along with the IDOC Communication Channels.
Can U give as a Better Insight on this Note how to check the Header Part as it is mandatory to MAP.We also tried to HARDCODE it by putting those Values and Mapping them to a Constant but it is Giving the Same Error.
Thanks and Regards
Somnath

How to not include the path when creating pdf from many html files?

Similar Messages

Maybe you are looking for