How to nudge audio file less than 1 tenth a second on time bar

I'm using FCE 4.0.1
I need to either move the video/audio file or the separate audio file brought in from Logic to line up with one another (they are the same audio, just denoised and EQed a bit in Logic. I've zoomed in to line the waveforms up, but they are just slightly off, and when I try to nudge one or the other into sync visually the file I'm moving jumps to the next point on the timebar and is off in the other direction. For example the section I'm trying to nudge jumps from 4:01:14 to 4:01:15, but the wave peak I'm attempting to sync it with is in between those two points, so it jumps past it. This will cause echoing and phasing issues.
Is there a way to drag files in the timeline linearly rather than from arbitrary point to point? I've tried shortening and re-bouncing the audio file, but it lines up the same way.
I'm new to FCE, and I'm trying to edit shots from 2 cameras at a concert along with the mixed audio? I'm trying to line the footage up with the audio by matching the waveforms by eye. What am I missing, is there an easier way to do this?
Thanks

See if this helps:
https://discussions.apple.com/message/13372236#13372236
Al

Similar Messages

  • In the timeline I want to move audio by less than a frame. How do I do this?

    In the timeline I want to move audio by less than a frame. How do I do this?
    thanks
    Belinda

    Hello Fox! Had to come to this page again when trying to know how to move the playhead in smaller increments. Did it and found that this method allows you to place the playhead at 80 locations of the frame! What a fine tuned editing shortcut!
    If you let me know where this information related to shortcuts is available, it would be great.Thanks. Have agreat day!
    DR.SOMANNA

  • How to send audio files as attachments?There is no attachment option in mail and no share option in MUSIC

    How to send audio files as attachments?There is no attachment option in mail and no share option in MUSIC

    i have some voice samples in Music file .how to share those files? or plz tel me where to store the voice samples

  • How do i get files larger than 2 gigs on a usb drive and still be able to use on a mac and pc?

    how do i get files larger than 2 gigs on a usb drive and still be able to use on a mac and pc?

    You can format the drive using ExFAT or you can format the drive NTFS then use third-party software on the Mac to enable writing to it: NTFS 11.2.443.
    Disk Utility 12.x- Format a disk for Windows computers

  • How do I download files greater than 200MB to my Iphone now my music is in the iCloud?

    How do I download files greater than 200MB to my Iphone now my music is in the iCloud? I still have my music on my hard drive of course.

    Go to settings --> store --> and make sure automatic downloads for music is on.  If you download music in iTunes, it should automatically download to your phone.

  • IMovie Won't Let Me Trim Clip Length To Less Than 1.0 Seconds

    Anyone have any luck trimming clips down to less than 1.0 seconds?
    I'm doing some video editing on iMovie for which I want to trim clips down to about 0.4 to 0.6 seconds depending on the audio track I'm trying to match. I can't seem to get iMovie to let me trim a track down past 1.0 seconds. When I try to trim it, the length just stays at 1.0 seconds. I HAVE been able to take a clip that's 1.0 seconds, split it, and then end up with two clips of 0.5 seconds each. However, when I try to make any length adjustment on these shorter clips they automatically jump back out to 1.0 second lengths and I'm back to square one.
    Thanks in advance and happy iMovie-ing!

    I find that splitting a clip is much easier then trimming.
    http://help.apple.com/imovie/iphone/1.2/index.html#kna257fc915
    So I tend to scroll through to where I want to make and edit, and then split the clip, and delete the bit to cut out.
    And then you can go as close as about .4 seconds.
    Sadly iMovie iOS isn't really made for fast cuts.
    So the only advise I can give is to split clips to get them shorter.

  • How to make manager approve more than one request in one time in SSHR

    Dear All,
    Anyone has an idea on how to make manager approver more than one request in one time in SSHR??
    for example, manager is having 20 requests to approve on Change Pay Function, he don't want to check one by one and approve it, he want to approve the 20 requests directly from one time, is there any solution for that??
    Thanks and Regards

    Hi Adel,
    As Vignesh has mentioned we don't have any standard functionality which will allow bulk approvals. We had same kind of requirement in performance management where the business was asking for a bulk approval feature which should be available to Skip level manager for approving the rating suggested by line manager. We had created a custom page which will list all the notifications and user can select the ones which S/He wants to bulk approve and click submit button. Internally we had called the workflow with item key and other required parameter and do the approval.
    You can have a work with your technical guy and can work on the same lines.
    Thanks,
    Sanjay

  • Shift audio by less than one frame?

    Greetings!
    Newbie to FCP. I have Standard DV tapes of concerts, very long clips (from 20 minutes to more than one hour), and I want to replace the audio with wonderful 24/96 carefully recorded audio done in Logic Pro. I have been able to sync the audio to video in FCP, but only to within one frame (when I drag the audio, it moves at one-frame jumps). I can sync much more closely in Logic, but how do I get the video with new sync'ed audio back into the FCP timeline? And would this degrade the video as I go round-trip from FCP to Logic?
    Is there any way I can move audio tracks in FCP by less than one frame?
    If not, can anyone suggest the best workflow to accomplish this?
    Thanks to all in advance!

    This should help:
    http://proappstuff.com/proapptipsvideotutorials/879F6B61-CFF9-4FD1-8D43-FDF89605 611A/BE5CA6A0-2D41-4F89-955C-16A05AC2A383.html
    But to answer your question... no.
    Good luck,
    CaptM

  • How to add audio file to iTunes when iMatch is on.

    I subscribe to iMatch but have found that certain audio files (talks) are ineligible for cloud storage.  I want to add these files to my device but on earlier versions of iTunes I wasn't able to add the files unless iMatch was turned off.  Now I don't seem to be able to add them at all.  Any ideas?
    Kirstenfromseattle

    To be mirrored in the cloud audio files must meet certain requirements. They must be at least 96Kbps and less than 200 MBs in size. Most "audio files" of the kind you describe are less than 96 Kbps so are ineligible to me uploaded to the iTunes Match cloud. You'll need to make the Media Kind something other than Music (which they shouldn't be anyway, since they are not music files) like Podcast. Then you will be able to sync the tracks to your iOS device via USB/Thunderbolt.
    You can use an OS X app such as Subler to set the Media Kind before you add the file to the iTunes library.

  • How to add audio files.

    I'm using Premiere Elements 11 on my iMac.  I can't for the life of me figure out how to add music files to the 8 or so that come with the program.  Anybody else having this problem or am I just dumber than most?

    Comstar 11 wrote:
    As I put in my original post I might be dumber than most and that's still a possibility.  I also tried the "Use Smartsound" same feeling that I didn't like the add on that just took me to another site to sell me music.  I couldn't find the "Project Assets" box after looking almost everywhere.  But.....  I was in the "Quick" mode.  Knowing I was a rank beginner I avoided the "Expert" tab.  But after looking everywhere else I opened that tab and "It's A Miracle" there it was.  Still stumbling through the learning process so thanks for your kind help.  If I hit the wall again I'll make another post looking for help.  Thanks Again.
    I tried the Quick mode.  When I did 'add media' in the upper left corner, video files went straigt to the project box.  Then I tried an audio file and it went below the video in the project box.  So, I see where in 'Quick' the 'Project Assets' box and step are skipped.  Sorry about misleading you.
    Either way, audio files get to the project box when you pick them up as a file on your computer.
    There are two great sources to speed the learning process.  lynda.com has courses that are like a personal demo of everything PrE does with a great coach explaining it.   http://www.lynda.com/Premiere-Elements-tutorials/Up-Running-Premiere-Elements-11/109763-2. html  A few if the chapters are free as a trial.  The fee is $25 for a month of access.  One month is more than enough if all you want is the one course. 
    If you prefere owning a course on a disk, video2brain is an alternative, but I don't think it is as thorough.
    Bill
    Bill

  • HOW CAN YOU PROCESS AN AUDIO FILE IN LABVIEW?I NEED TO TIME-PITCH SCALE IT

    hello guys.
    can you insert an audio file into labview for further processing?i need to get an audio file (stored on my computer) and further process it for time-pitch scale.does anybody know how?any pointers will much be appreciated.
    regards
    alex

    hi there
    open the "Graphics & Sound" palette from the functions menu to use vis for reading/Writing wavefiles, search the examples shipped with LV for first steps. use the VIs in the "Analyze" functions palette to modify the data.
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"

  • How to make stills duration less than 00:00:00:01 ?

    Hi,
    This may seem an odd request, but I have a sequence of several stills of a propeller blade on a model, sort of time lapse, move and photo etc, which when played together rotates the prop. They are currently set to 00:00:00:01 and play loop sees a very slow rotation. I thus need to make them even less than that duration. Is that possible and how is it done ? They currently form the project. R/click duration and altering 01 to 001 doesnt work, the last two numbers being frame number and 25fps is the project value.
    Perhaps I need to make the project more than 25fps, so that 00:00:00:01 which means 1 frame I presume, will be seen as far less of a second than 1/25th ? How do I set project to a higher fps if this is the solution ?   Then would I save out or export the finished film as a 25fps clip to use elsewhere ?
    I also found it silly that I had to right click on each stills clip in timelie and choose duration. I tried selecting all of them and r/click duration but duration was greyed out. If I had a lot there, surely there must be a way of making all their durations the same amount at once ?
    I am unable to zoom the timeline to drag their size less.
    Envirographics

    Hi,
    Thanks for the sugestions.
    I have not yet transferred a Sequence, I have created a second sequence and dragged it out as a floating window, then dragged a selection box across my stills and dragged them over to it, but no doubt this isnt the way to make them all a combined duration of say 1 frame. They still have separate properties. How is it done such that I can give them as you say one duration for the entire lot.
    AE no doubt is After Effects. another purchase. Working on it !
    Envirographics.

  • How to master audio file handling? Where is the logic of Logic?

    1. How can I master where to save my logic project files including audio?
    2. I want to save a project as a template WITHOUT the recorded track files. When I open the new template I dont want to have all old audio in my "media"browser inside Logic! How?
    3. I have one old project with a lot of audio of which only a few are used, yet when I try the cleanup function only a few are erased. Why?
    4. How to save a project so that ALL the files used are saved inside that project folder. In Protools and Cubase you can erase all material you  dont use.
    5. I want to have all my audio saved in ONE project folder but they end up scattered somewhere else, what to do?
    I can never get used to the apple/logic sense of file structure. Crazy! Where is the logic of Logic?  /Helpless to the logic of Logic 8

    Hi
    If I understand the problem correctly?
    jrm1 wrote:
    The possible issue concerns the start of the audio files.
    I recorded the tracks down to a stereo file, a region, that appears to start in the arrange at the correct point. But when you record, Logic includes some recording before the start of the region, before the Anchor, correct?
    This can depend on how you did the "record down to a stereo file".
    If you routed tracks to bus channels, then recorded the bus to another track, Logic will include the count-in in the audio file. As you say, the region in the Arrange will be correctly "trimmed".
    One solution would be to convert these bounced regions to new audio files (Audio Menu), another to use Bounce Region (or track) in Place.
    Alternatively, use a manually placed "2 pop" 2 seconds before the start of each cue.
    CCT

  • How to display audio file as a graph?

    Hi all,
    I m creating a swing application for processing audio file.
    In that application, i want to display audio in wave format.
    my requirements are
    *1. It should support all common audio file formats.*
    *2. zooming (scaling) of graph with respect to time should be possible*
    Please help me in doing this.
    Can anyone suggest any api for that?(if it is better to use some api)
    thanks in advance.

    scphan wrote:
    captfoss wrote:
    No one solved it. JavaSound doesn't support MP3 files...
    JavaZoom's API does: [http://www.javazoom.net/projects.html]
    3rd party libraries and plugins do lots of stuff, sure. But this is a JavaSound forum, after all...
    For mp3 files, audioInputStream.getFrameLength() is -1.(this code requires that for creating graph).
    So how to solve this?The existence of JavaZoom doesn't change the fact that "no one solved it", because JavaSound doesn't support MP3 files... So JavaZoom isn't going to change the results of audioInputStream.getFrameLength() for an MP3 file.
    So, in conclusion... If you want to play an MP3 file, JavaZoom will do that. But if you want to +"solve it"+ then you're still SOL ;-)

  • How to get audio files to play on iTunes

    So i've been rendering audio files recently and tryring to get them to play on itunes. Once the files are on my desktop i don't know how to get them to play on itunes. I tried right click opening them in itunes. I've also tried draging and dropping them with .mp3 and .m4a but i don't know what else to do. Pls help

    What format?  Will they even play in Quicktime Player?

Maybe you are looking for