How to number and message screening in nokia 5630?

hi
can anyone tell me, how to use the number and message screening in nokia 5630. it is a mobile with s60 platform and has number and message screening mentioned as its built in specification. i cant figure it out how?

Hi Len,
actually I thought about highlighting a word, phrase, or passage, holding it with the mouse, and then shifting it around within the text to the desired place, just as I used to do when I owned a PC. Does this work with Mac as well?
Frank

Similar Messages

How to mute and lock screen rotation at the same time? Loved this feature in iOS 5.

How to mute and lock screen rotation at the same time? Loved this feature in iOS 5.

You cannot do two different simultaneous VISA writes over a serial bus. There is a single rx line on the pc's com port and a single rx line on the instrument. You only hope is if the instrument allows you to chain commands and the reception of the carriage return triggers the instrument to implement both at the same time. Maybe you can send CTS01 and CTS02 separated by a space or comma. The manual should tell you if that's possible or maybe you need to ask the manufacturer.

TS1347 Need to know how transfer contacts and messages from an Iphone 3Gs to an iPhone 5s

how transfer contacts and messages from an Iphone 3Gs to an iPhone 5s

http://support.apple.com/kb/HT1766

How do I transfer contacts and messages from a nokia to an iPhone 5?

How do I transfer contacts from a nokia to an iPhone 5?

To transfer contacts and message from Nokia to iPhone 5, this Nokia to iPhone Transfer program can help.
More information about the program:
How to transfer contacts between iPhone 5 and Nokia phone

Lost all contacts. i looked at my contact list to find a number and the screen went back to the main screen page and wen i went back into my contact list all my numbers are gone?? please help

i looked for a phone number in my contact list and the screen went back to the main screen sort of kicked me out of my contact list, then when i went back into contacts all my contacts are gone! help

Try restarting your iPhone first. If that fails, reset iPhone by pressing the Home & Sleep/Wake vuttons together for 10 seconds until you see the Apple logo.
Cheers!

HT4972 My phone is not responding since I downloaded the IOS update 7, I am locked out of using my iPhone, I enter my 4 digit number and a screen appears saying Joining "Sherry's Wi-Fi Network" but nothing else is happening and I can't use me phone.

An update from Apple appeared on my iPhone so I downloaded it, it was an IOS update. The screen said to swipe to open, then enter a 4 digit number, which I did then it went to a screen asking for my network info which I entered (except I guessed at the security as being "WPA2", I have not idea, I entered my password and now the only screen that will appear is one stating it is Joining my stated Network??? but nothing is happening and I can't use any of my iPhone features at all? Help

Go back to the previous page. If there's no available wireless networks listed except "Other" which is manually putting the wireless network information, see if you have "activate using cellular" or "connect to iTunes" option.

How to mask and unmask screen fields?

Hi,
    I have a PNP LDB selection screen. Also I have an extra Key Date field at bottom ( apart from the std period selection ) , which is defined by me.If i enter some value in a particular field say, Action Type, I need to make my Key Date field an input field. But if the user does not enter any value in Action Type, then the Key Date field has to be grayed out. Right now what happens is , after i input something to Action Type, I need to press 'Enter' key to make the Key date active.
I am looping the screen in At sel screen o/p. But , I dont want to press enter key. The moment i type something into Action type field, I need the other field to be active, just like the case of radiobuttons.Is ther any way out for this? Pls help....
Thanks in advance...
Mahesh

It's more that we're dealing with "block mode" communication from the GUI to the app server, so data only travels from the user to the program when some function is selected.
So there is a way if you were to set up your Action Type as a listbox (and assuming you are on a recent SAP release)... as per the example below. This ties a user command into the change of a listbox setting - this example is for fun only of course, but if listbox1 is changed then the date opens, and if listbox2 is changed, it locks again.
Hope this helps.
Jonathan
report zlocal_jc_sdn_listbox_ucomm.
type-pools:
vrm.
data:
g_unlock             type sap_bool.
parameters:
p_bukrs1             like t001-bukrs as listbox visible length 15
                         user-command zcc01,
p_bukrs2             like t001-bukrs as listbox visible length 15
                         user-command zcc02,
p_date               like sy-datum.
initialization.
perform listbox_values_fill.
at selection-screen output.
perform at_selection_screen_output.
at selection-screen.
perform at_selection_screen.
start-of-selection.
format reset.
write: / 'Listbox 1 - you chose:', p_bukrs1.
write: / 'Listbox 2 - you chose:', p_bukrs2.
*&      Form at_selection_screen_output
form at_selection_screen_output.
* Toggle lock / unlock
loop at screen.
    if screen-name = 'P_DATE'.
      if g_unlock is initial.
        screen-input = '0'.
      else.
        screen-input = '1'.
      endif.
      modify screen.
    endif.
endloop.
endform.                    "at_selection_screen_output
*&      Form at_selection_screen
form at_selection_screen.
case sy-ucomm.
    when 'ZCC01'. "CC 1 changed
      g_unlock = 'X'.
    when 'ZCC02'. "CC 2 changed
      g_unlock = ' '.
endcase.
endform.                    "at_selection_screen
*&      Form listbox_values_fill
form listbox_values_fill.
data:
    l_id                type vrm_id,
    lt_value            type vrm_values,
    l_value             like line of lt_value.
* Listbox 1:
l_id = 'P_BUKRS1'. "name of variable in screen
l_value-key = '1000'.
l_value-text = 'London'.
append l_value to lt_value.
l_value-key = '2000'.
l_value-text = 'New York'.
append l_value to lt_value.
l_value-key = '3000'.
l_value-text = 'Canberra'.
append l_value to lt_value.
call function 'VRM_SET_VALUES'
    exporting
      id     = l_id
      values = lt_value.
* And re-use the list for listbox 2
l_id = 'P_BUKRS2'. "name of variable in screen
call function 'VRM_SET_VALUES'
    exporting
      id     = l_id
      values = lt_value.
endform.                    "listbox_values_fill

Regarding blocking of unwanted calls and messages

how do i block unwanted calls and messages on my nokia asha 210..is there any utility available to do so??

Hi tangra,
Welcome to Nokia Support Discussions!
As what plepleple posted, this feature is not supported by the phone. We also checked that no application can be downloaded that has this feature.

My lumia 720 suddenly stuck and black screen with ...

Hi
My lumia 720 suddenly stuck and black screen with Nokia Symbol is displaying I have tried for soft reset but it doesnt work will someone help me its very urgent
varun

You can try to perform the soft reset again. If this would fail, below hardware key reset combination is what I can suggest. This deletes all the personal content of the phone.
Option 2: Hardware key combination
Use this option if the phone fails to fully switch on when pressing the power on key.
Note: No warning about data loss!
Nokia Lumia with Windows Phone 8
Step 1
Make sure the charger is disconnected.
1. Switch the power Off.
2. Press and hold the Volume down and connect the charger, if succeed an exclamation mark (!) is shown on the screen.
Step 2
Then input the keys in the following order:
1. Volume up
2. Volume down
3. Power
4. Volume down
Step 3
The phone will reset and boot up automatically. Please note that this may take several minutes.

I want to block a number from calling and message me but how do i do this is there any app avalible for this

I want to block a number from calling and message me but how do i do this is there any app avalible for this

Sadly, as Call Bliss uses the built in Do Not Disturb feature, it requires that your screen be locked in order to function.
I'm hoping (and have submitted feedback) that Apple will beef up DND to work even when the screen isn't locked.

How can I change the phone number for messaging and FaceTime?

How can I change the phone number for messaging and FaceTime?

Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Text on the iPad
http://ipad.about.com/od/ipad_tricks/a/How-To-Text-On-The-Ipad.htm
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

How do I set up a new phone number for messaging and facetime on my iPad?

My iPad has it's own phone number through Verizon. Before I knew this, I had already set up messages to use my iPhone number. Now I can't figure out how to set up the iPad phone number for messages and facetime on the iPad.

Are you trying to message another Apple device?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

When I turn on messages, I can't see my messages. All I can see is a screen with horizontal lines and a text list of addresses. How can I get the regular message screen back?

When I turn on Messages, I can't see my messages. All I can see is a screen with horizontal lines. How can I get the regular Messages screen back?

The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.

I got the iPhone 5s this morning and I kept my number and as soon as it charged I got all my messages, but when I connected it to my iCloud and backed it up, when it was finished all the messages I received were gone. How do I get them back?

I got the iPhone 5s this morning and I kept my number and as soon as it charged I got all my messages, but when I connected it to my iCloud and backed it up, when it was finished all the messages I received were gone. How do I get them back?

Hi sofia124,
Welcome to the Apple Support Communities!
It sounds like you may have either set the iPhone up as a new iPhone or restored from a backup that didn’t have your messages on it. If you do have either an iCloud or iTunes backup that you believe has your messages saved, you can restore from that backup to recover your information. Please use the attached article as a reference for restoring from a backup.
Back up and restore your iOS device with iCloud or iTunes
Have a great day,
Joe

How to number and message screening in nokia 5630?

Similar Messages

Maybe you are looking for