How to object to a telephone pole

I am trying to make an objection to a pole which was placed in my neighbours property with his consent.
I phoned Openreach in order to obtain the correct procedure for making an objection.The customer service official informed me that a notification with all details would be on the pole.I explained that I have no access to this information (on private land) and was unable to help me any further.
Therefore I am writing to ask for an email address and postal address specifically for objections .
Will I need any other information regarding the pole ? If so how can this be obtained this ?
I was shocked that this was allowed to happen as their was an alternative route but that would have ment a pole at the front of there land allowing them to conect to the pole on their street.
The overhead wires are running across my garage and the full lenght of my driveway to connect to the pole on my street.
( My neighbours live to the back of my property on a different street) They do have a private right of way adjecent to my driveway ) When i was buying the property my soilicitor informed me it was probably the servants entrances for days gone by.
I have sent several emails to Openreach asking for this information however they keep directing me back to the openreach website where i can make a complaint. On the complain form you have to accept all charges for the pole to be reloacted/removed. I am not prepared to pay for the pole to be removed / relocated
Any information on this would be greatly appreciated . Oh I live in Northern Ireland just in case it different on the mainland .

See https://www.openreach.co.uk/orpg/home/contactus/wayleaves/wayleavesfaqs/wayleavesfaqs.do
What are "flying wires"?
Under certain circumstances, Openreach is allowed to "fly wires" over an adjacent property from an existing pole without the need for a wayleave. This permission only applies providing we do not need to enter the property concerned to do so, that the wires are at a height of 3m or more, and that they do not interfere with the normal business on the property."
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

How can I get rid of telephone poles?

I take lots of pictures of buildings in urban settings. Quite often, I take a shot against a blue sky, and there is no way to frame or crop the picture to avoid having things like telephone poles or street lights in the photo.
I can use the retouch tool to "erase" telephone wires, but anything thicker than that leaves a smudge on the photo. The problem is especially acute when the object is close to trees or other non-sky elements because it's almost impossible to avoid the dark color of the trees.
The ideal solution would be to be able to copy a section of nearby sky and paste it over the offending object, but if there's a way to do that in iPhoto, I haven't found it.
I am strictly an amateur, so buying and learning PhotoShop is not an option. I've tried Picasa and a couple of other free editors, but none seem to do more than iPhoto. I've also downloaded GIMP, but I must admit that I haven't been able to master the interface.
Any ideas?

You can't do this in iPhoto. You will need an external editor for the job.
In order of price here are some suggestions:
Seashore (free)
_[The Gimp|http://www.gimp.org/macintosh>_ also free
Graphic Coverter ($45 approx)
Acorn ($50 approx)
[Pixelmator|http://www.pixelmator.com> ($60 approx.)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Do a search in Google for for tutorials based on whatever one you try. There is a wealth of help on sites like You Tube. For instance I search You Tube with "Gimp Tutorial" and found this
http://www.youtube.com/results?searchquery=gimp+tutorial&searchtype=&aq=0&oq=GIMP
Regards
TD

Trying to Remove Tree Pushed By Sandy Onto Verizon Telephone Pole

A tree in my backyard in Brooklyn was pushed so that it is now leaning on a Verizon telephone pole (the pole is marked NYT). Most of the tree has been removed, but the tree service needs Verizon to look at the situation and determine how to proceed before completing the job. I am using this board to find out how to get Verizon's attention to this matter.

Hi OneL,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

How can I move my telephone number from one Iphone to another

How can I move my telephone numbers from one IPhone to a new one?

if you are talking about your contacts. backup your old iphone then do a restore to the new phone and that will transfer your contacts your settings and pics and music.
if you are talking about chaning your phone number from an old phone ot a new one that has a different number. you have to contact your phone carrier.

How to do conference in telephone analog with an VG224 gateway?

hello everybody
i have a question, how to do conference in telephones analog with an VG224 gateway?
this is my configuracion:
stcapp feature access-code
prefix *
stcapp feature speed-dial
stcapp call-control mode feature
ccm-manager redundant-host 10.92.36.6 10.92.36.4
ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config server 10.92.36.7
ccm-manager config
ccm-manager sccp local FastEthernet0/0
ccm-manager sccp
sccp local FastEthernet0/0
sccp ccm 10.92.36.6 identifier 2 priority 2 version 7.0
sccp ccm 10.92.36.7 identifier 1 priority 1 version 7.0
sccp
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
switchback method graceful
dial-peer voice 999200 pots
service stcapp
port 2/0
i´m registered the VG with a CUCM 8.6 with SCCP protocol

"During an active call, user presses hookflash for dial tone, dials a third party, and then presses hookflash again to connect all three parties.
Note For ad-hoc conferencing on Cisco Unified SCCP IP phones, the #3 feature code is required for the "conference" call-control mode after pressing hookflash the first time."
http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html
HTH, please rate all useful posts!
Chris

In query, how many objects can include in structure

Hi expert,
In BEX query coloum, How many objects can include in structure.

Hi Sunil,
We can include maximum of 999 fields in one structure.
http://help.sap.com/saphelp_nw04/helpdata/en/4d/e2bebb41da1d42917100471b364efa/frameset.htm
Regards,
Venkatesh

I have an Apple 3GS phone. How can I record a telephone call?

I have an Apple 3GS phone. How can I record a telephone call?

Sorry, not natively supported on a non-jailbroken iPhone, & there are no Apps that provide this capability for non-jailbroken iPhones. Apple is a US based company, & doing such is not legal in many parts of the US. That's why such is not supported.

How many Objects are created in this?

Hi,
How many objects are created in the flwg code:
String str = new String("Hello");
String str2 = "Hey there";
str = str + str2;

Depends if you're counting objects created at compile time.
"Hello" is created at compile time. That's 1.
new String("Hello") creates a new String object at runtime, pointing its backing array at the "Hello" in the constant pool. That's 2.
"Hey there" is created at compile time. 3.
str + str2 I might do everything at compile time, or it might do some at runtime. I don't know if str is considered a compile time literal here. I think not, but I'm not sure. You can check by using javap. If I'm correct, then at runtime you'll create a StringBuffer (4) and another String (5).
So I'd say 5 objects. But if the compiler treats str as a literal and therefore can do the str+str2 at compile time, then it might do so without creating the StringBuffer. Or it might still create it at compile time, use it, and throw it out.

How many Objects created??

Hi Friends,
I am really confused with this question,can someone please tell me how many objects would be created by the following code??My answer is two("java" on the heap and the normal new String() Object),am i right???
public class Objects{
public static void main(String[] args)    {
    String one = "Java";
    String two = "Java";
    String three = "J" + "a" + "v" + "a";
    String four = new String("Test");
}Thanks

Probably not, since all the operands are string
literals. The compiler probably sees that and instead
generates the same bytecode that it would have if it
had been coded as: "Java" in the first place. But
again, still stupid and pointless.just what i wanted to say but was a bit slow. maybe it's stupid and pointless,
but for grins, i am attaching the constants pool from the class file that was
obtained by compiling the code in post 1 with Sun's compiler. I don't see any
"J" or "a" or .........
pool index: 1 type: 10 class index: 7 name index: 16 value: null
pool index: 2 type: 8 class index: -1 name index: 17 value: null
pool index: 3 type: 7 class index: -1 name index: 18 value: null
pool index: 4 type: 8 class index: -1 name index: 19 value: null
pool index: 5 type: 10 class index: 3 name index: 20 value: null
pool index: 6 type: 7 class index: -1 name index: 21 value: null
pool index: 7 type: 7 class index: -1 name index: 22 value: null
pool index: 8 type: 1 class index: -1 name index: -1 value: <init>
pool index: 9 type: 1 class index: -1 name index: -1 value: ()V
pool index: 10 type: 1 class index: -1 name index: -1 value: Code
pool index: 11 type: 1 class index: -1 name index: -1 value: LineNumberTable
pool index: 12 type: 1 class index: -1 name index: -1 value: main
pool index: 13 type: 1 class index: -1 name index: -1 value: ([Ljava/lang/String;)V
pool index: 14 type: 1 class index: -1 name index: -1 value: SourceFile
pool index: 15 type: 1 class index: -1 name index: -1 value: Objects.java
pool index: 16 type: 12 class index: 9 name index: 8 value: null
pool index: 17 type: 1 class index: -1 name index: -1 value: Java
pool index: 18 type: 1 class index: -1 name index: -1 value: java/lang/String
pool index: 19 type: 1 class index: -1 name index: -1 value: Test
pool index: 20 type: 12 class index: 23 name index: 8 value: null
pool index: 21 type: 1 class index: -1 name index: -1 value: Objects
pool index: 22 type: 1 class index: -1 name index: -1 value: java/lang/Object
pool index: 23 type: 1 class index: -1 name index: -1 value: (Ljava/lang/String;)Vwalker

I need to know how many objects i got selected

Hi all,
I need to know how many objects i got selected for a particular issue and ussualy are too many to count one by one. I know that this information is provided in other software like Corel or Freehand, but I didn't find out how to get this info in Illustrator.
Any idea?
Thanks

Open the Document Info palette.
From its flyout menu, turn on Selection Only and Objects.
The palette will not remember those settings. You have to re-select them every time you relaunch Illustrator.
The Document Info palette is a half-baked hack, tagged-on to display a subset of the information in the normally-hidden programmer's window, instead of incorporating the data properly into the program's interface. So it's another completely unintuitive grab-bag of important information that everyone needs, but no one would expect to look for there.
JET

How could I change my telephone number from iMessage ?

How could I change my telephone number from iMessage ? I've try in my Apple ID and doesn't work.

Hi,
On your iPhone Add the Apple ID
On the Mac then Accept the pop up(s) that appear saying the iPhone is using the ID and iPhone number.
Untick the old number in the list for Receive At and Start Conversation From drop down if it is the listed item.
For complete removal you have to delete a .plist or two.
Open a Finder window
Use the Go Menu whilst holding down the ALT key
Select the Library that appears.
Navigate to the Preferences
Find com.apple.imservice.imessages.plist and com.apple.imessage.bag.plist and drag them to the Trash.
Restart the app on the Mac.
It will ask for the Apple ID.
It should get the pop ups about the iOS device.
10:23 pm Wednesday; November 13, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How could I erase my telephone contacts from my old iphone4?

how could I erase my telephone contacts from my old iphone4?

If your Old Phone was an iPhone... See Here
http://support.apple.com/kb/HT2109

How Many Objects Are Selected

How can I tell how many objects are selected when I draw a selection marque around multiple objects?

Open the Document Info Palette.
Find its secret little flyout menu.
Select from that menu "Objects".
Let go.
Then go to that same menu all over again and select "Selection Only".
Scroll through the list and sum the quantities shown. Except be careful not to include the count of "All Text Objects" with the counts of "Point Type Objects", "Area Type Objects", and "Type On A Path Objects".
Repeat those steps every time you start a new work session in AI, because AI's palettes can't remember the way you set them between launches.
How could you have overlooked that intuitive and straightforward routine?
JET

How many objects are created?

I have this question which some one posted to me.
He asked me how many objects are created when an object of a simple class is created for example
class A{
public static void main(String args[])
A a1 = new A();
Now how many objects are created? I think only one. Can anyone tell me if any other objects are also created.
Plz tell me .

No, the answer is indeed 1. All the other objects
(including the String[] in the main method
parameters) are created outside of the A
class, either by the JVM itself or by some other
class that calls the A.main() method. You can try
this out for yourself by adding a constructor such as
A()
System.out.println("Creating class A");
} and see what prints out.Take a closer look at the question:
how many objects are created when an object of a
simple class is created for exampleIt doesn't say "how many objects of type A are created".
I.e. The VM has to load class A before you can create an object from it, and thus an object of type Class is created. There are also a bunch of other objects which needs to be created before you can instantiate A.
Kaj

Garbage Collection: how many objects are created after for loop?

Please see the fallowing java code
1 public class Test1 {
2
3     public static void main(String[] args) {
4
5          MyObj obj = null;
6          for(int i=0;i<5;i++){
7               obj = new MyObj();
8          }
9 // do something
10
11     }
12 }
so my question is How may objects are eligible for garbage collection at line no: 9 (// do something)?

so my question is How may objects are eligible for
garbage collection at line no: 9 (// do something)?It's impossible to answer that question since we don't know how MyObj is implemented.
Kaj

How to object to a telephone pole

Similar Messages

Maybe you are looking for