How to obtain license for 10 users of siebel software?

Hi All,
Can anybody please tell me:
How to obtain license for 10 users of siebel software?
how much does that cost (in US $)?
and how to become partner with siebel for implemeting siebel applications
Thanks,
viswambhar sarma.

Updated: March 2015
National Instruments provides this forum as a courtesy to its customers. However, this is not the primary method for requesting support and assistance with the DASYLab product. NI does not actively sell the DASYLab software, nor does it actively support it.
Where else can you obtain assitance?
Your reseller - it's likely that they are familiar with your hardware and can provide help.
The www.dasylab.com web page has updates, drivers, product information, an extensive list of technical notes.
Measurement Computing Corporation has product information, product updates, and support information.
In Europe, MeasX GmbH & Co Kg sells, supports and enhances the DASYLab software
We recommend that you contact your reseller first. They know your hardware and software environment, and are most likely to be able to assist you quickly.
You can request help directly from a support engineer by going to the Support section of the www.dasylab.com web page. This is automatically routed based on geography, to the person best suited to assist you.
If you post a question in this forum, we cannot guarantee a response time.
When requesting support for DASYLab
DO NOT post your full DASYLab serial number
Please tell us
the version of your DASYLab software,
the level of your software (Lite, Basic, Full, Pro)
the exact DAQ device by manufacturer and model,
your operating system and computer,
and, if appropriate, a copy of your worksheet.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Similar Messages

How to apply license for SSM 7.5 & Netweaver CE 7.1?

How to apply license for SSM 7.5 & Netweaver CE 7.1?
My application server java in SAPMMC: appear message: no valid license found.
Acually we already bought license and download,
So, how to solve this license problem?

Chamnap,
When your NetWeaver license expires, it can be restarted, but will only run for 1/2 hour, to allow installing a new license.
Step 1- Start NetWeaver CE from the control console
Step 2 - Log on to NetWeaver Administrator http:///[server]:50000/nwa and go to Configuration tab then Infrastructure sub-tab, then Licenses
Step 3 - Make note of your System Number and Active Hardware Key in the System Parameters section
Step 4 - Navigate to the Service Marketplace http://service.sap.com/licensekey
Step 5 - You are looking for SAP Business Suite - SAP Products with ABAP Stack, Without ABAP stack (WEB AS Java-J2EE Engine) SAP Enterprise Portal link
Step 6 - Fill in your Hardware Key and System # - Make sure you choose this License Type: J2EE Engine - Web Application Server Java (it is not the default selection)
Step 7 - A message at the bottom of the page will note a new key has been generated and you can Download the txt file needed (you also receive an email with the info as well)
Step 8 - (Restart NetWeaver CE - if its timed-out) On the Licenses page of nwa click Install from File > Browse to the txt doc you downloaded and ADD
You now have the new license install. Make note of the date to schedule the time for any future updates, so that service is not interrupted.
If you cannot access the license key on the Service Marketplace you will need to contact your SAP account representative.
Regards,
Bob

How to install license for expired SAP J2EE engine?

Hi,
I had used evaluation copy of the SAP J2EE engine. This copy works for few days and now the SAP J2EE engine is stopped. After its expiration, we purchased the permanent license.
My question is: how to install license for the expired SAP J2EE engine so that the engine can be started without re-installation?
Waiting for the reply.
regards,
Anand

Dear Anand ,
To install license of the J2EE Engine :
In the Visual Administrator -> Server 0 -> Services -> Licensing Adapter. Then choose tab page Runtime -> Installed Licenses and Install subsequent temporary license.
check the URL for further details :
http://help.sap.com/saphelp_nw70/helpdata/en/14/5e533e5ff4d064e10000000a114084/frameset.htm
Hope this will help you resolve issue .
Regards ,
Santosh

How to reset password for user sap*

Hi friends,
How to reset password for user sap* if any solution please mail me.
Thanks,
Yogesh

Hi,
Steps for Reset SAP* Password
If you forgot or lock "Administrator or J2EE_ADMIN" password just follow below steps:
STEP-1: Enable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = TRUE"
4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
5.Save.
6.Restart the engine.
STEP-2: Login with "SAP*" into portal
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / password as" SAP* / <password ex: abc123>"
3. Search for "Administrator" user
4. Reset or change password for "Administrtor"
STEP-3: Disable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = FALSE"
4.Save.
5. Restart the engine.
STEP-4: Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please follow steps one by one. it should resolve your issue.
Thanks,
Nagaraju Parlapalli

HT4009 How to obtain refund for unauthorized in-app purchase in Real Racing 3 game

Recently my 6 year old son was playing Real racing 3 game, he has without our knowledge clicked "Buy" on few options and I have been billed Rs.16610 on my credit card. He was not prompted for any password when he clicked buy option.
As soon as we received alert on these transactions, we blocked the credit card and also removed the card from the itunes account to avoid such mistakes in future.
We need help to find how to obtain refund for this transactions made without proper consent.
Thanks

You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
To try and stop it happening again you can turn off in-app purchases on your iPad via Settings > General > Restrictions > In-App Purchases 'off, and you should also have a Require Password setting on the Resrictions screen which you can set to 'Immediately' (the default is a 15 minute perid during which it doesn't need re-entering).

HI,how to find roles for user based on userid?

hi,
i need to find roles for each user based on user id.
can i know any one knows this how to get roles for user?
thanks,
jpullareddy

hi,
i solve my self.
i am getting values
jpullareddy

How to create report for user in terminal licens

Dear Sir,
how to take report for terminal server license, I have windows 2008 r2, I am trying to create a report for cal per user license
it is disable.
windows 2008 r2
workgroup
citrix 6.5
thanks
saud alam
saudalam

Hi,
Thank you for posting in Windows Server Forum.
Agree with words of TP, to create per user CAL report server must be domain joined. You cannot create report in workgroup mode. Please check beneath article for guide.
Track the Issuance of Remote Desktop Services Per User Client Access Licenses
http://technet.microsoft.com/en-us/library/cc754625.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

How to update license for SUP 2.0?

Hi,
We had previously installed a trial version of SUP 2.0 on a windows server 2003 version 64 bit system. Since it was only a trial version, it expired and now we have obtained a license for the same.
How do I use the same installation by updating the license? Is it possible or I have to uninstall the whole thing and install from scratch?
Thanks & Regards,
Vaishnavi

HI
To apply license to any version follow these steps
1. Down load the license from Sybase control centre, and download the Licence file, copy and paste
\\sybase\unwiredplatform\servers\unwired servers\ (paste the file) (licence)
Run cmd promt >sybase\unwired platform\server\inwired servers\bin licence.bat ED DT 20
( as per the licence agreement)
regards
Aps

How to Control authorization for users with certain status for level 2 WBS Element

Dear All,
Is there any standard way or enhancement available to control authorization for users with certain status for WBS Element i.e. for example
Pre-requisite:
There is only 2 level of project i.e.
Lev_ WBSE_______Description
1___ 7-14.E_______summay outage controller
2___ 7-14.E.2310__ Plant/unit # 2310
2___ 7-14.E.2310__ Plant/unit # 2220
Project Controller (authorization role assigned "Z_PS_OP7_OTGCON_C") have all project level authorization
Plant/Unit Controller (authorization role assigned "Z_PS_OP7_PLNTOTG_C_2310") have only level 2 authorization with enhancement that we did in system by Z table.
User ID_ Plant #
123345_ 2310
122455_ 2220
Issue:
After System Status released and User Status approved the WBS basic date for Plant/Units should be restricted from updating/changing by Plant/Unit Controller level and only project controller should have this authority.
Solution required:
Can any one tell how to control this scenario either by standard or enhancement available to control authorization
BR
Saqib Usman

Hi,
Did you explore SAP Enhancement CNEX0002 Using Transaction CMOD?
Thank you and regards,
Varshal Kachole
The SCN Rules of Engagement

How to track activity for users logged in using solman to target systems?

If a person accesses a monitored system through solman, how can we track the user activity (including transactions viewed and changes made etc)?
Thanks
Prasad

Hi Prasad,
Please refer the following similar threads to get more detailed Information:
STAD parameter
STAD Historical Data - How Long?
STAD - data for last 30 days
Also check this useful Blog about STAD(/people/andreas.vogel/blog/2007/01/12/statistical-records-part-1-inside-stad) and SAP Note 139418 - Logging user actions.
You can also configure and activate the Security Audit Log (SM19) and then analyze its entries through SM20. You can configure exactly what needs to be tracked...
Useful transactions:
SM19 (config)
SM20 (analyze) (SM20N , depending on release)
SM18 (delete old logs)
Other SAP Note which is helpful in this case 539404 - FAQ: Answers to questions about the Security Audit Log
Hope this helps.
Regards,
Shyam.

How to switch licensed for "ADOBE DESIGN STANDARD" from iMac to Macbook Pro?

I am currently licensed for "ADOBE DESIGN STANDARD" on an iMac. I have a new MacBook Pro and want to use that instead of the iMac. Do i need to get a new license key? or ??
I know i can download an "eval" copy on the laptop, but how do i switch license keys? i'm not even sure i still have the (valid) license key for the iMac...can i request another??

As long as you are staying within the same general platform (PC vs Mac) you do not need to change licensing. You are allowed to have two activated installations with your license, so you should be able to install on the new machine without having to worry about the older one at all (unless you ever want to free up the second activation for yet another machine). As you mentioned, you can download the trial version and use the serial number from your purchase to activate it to full use.
If you registered your software with Adobe, the serial number should be available via your Adobe account online. If you didn't register it then you will at least understand why it pays to do so.
IF you end up needing to resolve any issues with activating the product on the new machine you will need to contact Adobe Support directly. Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

How to fix "Licensing for this product has stopped working - Error 150:30"?

I cannot pen PSE or Bridge. It get the message "Licensing for this product has stopped working - Error 150:30".
I assume it is because I recently upgraded my Mac to Yosemite.
What do I need to do to be able to open PSE again?
Thank you.

Thank you. I appreciate your tips. I tried solution 5 and it doesn't work.
The rest is essentially gibberish to a basic user like myself. I have
neither the expertise nor the confidence to go into these folders and start
mucking around in there. Can I please have someone call me and guide
through the necessary steps. My number is 06 46 40 94 39 (Location: France).
Cheers.
Michel Payen-Dumont & Nancy Feyerer
www.gaulejac.blogspot.com
Tél.: 05 53 50 72 80
M: 06 46 40 94 39
N: 06 45 29 59 40

How add Authorization check for user with assigened role for t.code-MIR4

Hi All,
Regarding authorization how to check authorizations check for user whith assigned roles for the t.code MIR4 using ABAP.
In Detail:2) All users are allowed to go to MIR4(invoice number), But ONLY for users with role: MM_RELEASE_INVOICE can proceed to do the posting.
suggest me...
Thanks,
srii..

Hi Sri ,
first u need to find out in which user rules u are using this object , after that if u want to restrict users then remove create/change values from that object values .
make use of Tcode SUIM to find out all roles which are using this Object.
or
ask ur basis guy to remove authorizations to create/change....
regards
Prabhu

How to generate license for AIP-SSM without PAK-number?

Hello! I’m sorry for my English. I have a problem with generating license for AIP-SSM. My contract with SMARTnet service is activated, but I don’t have a PAK-number. How I can generate a license for updating my module?

Alternatively you can always write an email to [email protected] with your serial number and they should be able to provide you the license for any cisco device.
Sachin

How to config CDM for user Authorization

Hi Sir,
Can you tell me how to config CDM 4630 for user authorization with different privilege by using radius server
Regards

Here is a link on configuring user authentication on acns.
http://www.cisco.com/en/US/products/sw/conntsw/ps491/products_configuration_guide_chapter09186a008008123f.html
Not sure if there is one available for authorization too.

How to obtain license for 10 users of siebel software?

Similar Messages

Maybe you are looking for