How to OMBEXPORT source modules ?

How can I OMBEXPORT source modules ? I cannot find a corresponding objectTypeValue in the scripting reference document.
Emiel Odijk

Emiel,
The (known) issue is that we do not support Oracle source modules in this release. You would have to export the entire project, which includes the source modules. If your database source is not lower than Oracle 8.1.7, then I would recommend you capture your source into a target module. Going forward, the distinction is going to disappear anyway.
Thanks,
Mark.

Similar Messages

How to change the source module version

Hi All,
In the OWB i created a source module and during those steps i clicked on version 10.1, but during deployment in the deployment managaer when i tried to register the location, its giving me an error as "Source verison 10.1 is not matching with the target version 10.2", can any one please help me or Advice me as to how to change the "source module version"?
Thanks

Hi
what i understood is that the source module is associate with the location and you have provided the 10.1 which you need to change.
so you can change that under location.
Cheers
Nawneet

How to create MSSQLserver source module?

hi, all
My source database is MS SQLServer2000,
how do I create SQLServer2000's source module?
I need particular process ã thank you!

Hi JP ,
Yes. I have already imported the tables into the OWB repository.
Anyway , I can deploy the mapping successfully !!! I checked a topic in this forum which is
Re: For MS Access
Nikolai Rochnik said
"However, when you register a location, the Schema value will be used by OWB to construct a schema.table@db_link in a FROM clause. You want it to be just table@db_link but OWB does allow for empty value in Schema. I will log this as a bug, but an easy workaround would be to use db_link explicitly in the mapping configuration, thus disregarding registered location. Right-click on your map -> Configure -> Source and Targets -> [your source table]. In the Database Link paste the name of the link that was created by OWB in the target schema when the Connector was deployed. It would be something like, depending on your naming, ACCESS_SID@FROM_ACCESS_TO_ORCL.
I have just tried it and it generates, deploys and executes correctly."
I followed his steps and get it work but there is a warning message.
LD-1124: Schema and/or Database link physical configuration parameters should not be set for Table1.
Is it possible to eliminate this warning message ? Anyway , Thanks for your response and help !
Daniel

How to create function module for getting customer name

Hi Experts,
How to create function module? when in import parameter kunnr values to be passed it must give name1 details according to the customer number...
how to write the logic in source code....
Regards,
Thiru. R

1. First of all create function group.
2. Create function module using this function group.
3. If only one kunnr is needed at a time, create import parameter for it. But if many kunnr to be entered at a time,use table.
4. Fetch name1 for each kunnr from KNA1 table.
"->> if many kunnr
if not t_kunnr[] is initial.
select kunnr as kunnr name1 as name1
into table t_kunnr_name1
from kna1
for all entried in table t_kunnr
where kunnr = t_kunnr-kunnr.
endif.
sort t_kunnr_name1 by kunnr name1.
delete adjacent duplicates from t_kunnr_name1 comparing kunnr name1.
table t_kunnr_name1 will contain kunnr and its name1.
I hope logic is clear for you now.
Regards,
Aparna

Changing a source module to a new database?

Hi there, looking for help from the users here! I'm on OWB 10.2 This should be a simple one, but I'm having a hard time!
The short summary of my question, is how do I change my mappings in my target db to pull from a new source module / database?
Here's the longer description:
In design center I have 2 different locations ("loc x prod_old" and "loc y prod_new"). I currently have a source module callled "m_src" that currently uses "loc x prod_old". So all views, etc, in "m_src" are currently being pulled from "loc x prod_old".
Now I want to change the "m_src" modeule from "loc x prod_old" to "loc x prod_new", and then I want to make sure all of my mappings in my "m_tgt" module which have objects in "m_src" get pulled from the "loc x prod_new".
On "m_src" module I change data location to "loc x prod_new" and also change metadata location to "loc x prod_new". Then I configure "m_src" and make sure the dropdowns point to "loc x prod_new" as well. Save. So far so good. In "m_src" I can now verify by selecting a view and looking at the "data" for the view.
I can also now select a mapping in my "m_tgt" module and when I generate the code I can see that it will use "loc y prod_new" instead of "loc x prod_old", which is correct.
When I go to control center, and run the mapping, the mapping is still using the "loc x prod_old", which is not what I want. It seems that I have to re-deploy each mapping. When I go to the db and look at the mapping using toad I can see the mapping still points to the "loc x prod_old". Only when I re-deploy the mapping does it use "loc x prod_new."
Surely there must be a way that I can change my location or my source module and get my mappings to use the new location, without having to re-deploy each and every mapping. How can I best do this?
Thanks!

I guess I should have waited another day before posting (unfortunately time is critical now). I figured this out and am closing the thread.
design center > location > edit it, pointing to new db
design center > go verify the data on a view
control center > target module > connector > drop / replace
in a sql tool you can now verify your dblink points to the new db

Service Check Data Source Module Events

Hello,
I seem to keep having this alert the event number is 11771, i could really use some help here on how to fix this issue if possible.... these errors are being generated from SCE BY SCE
Thanks,
Danny
Date and Time:
2/4/2010 5:19:14 AM
Log Name:
Operations Manager
Source:
Health Service Modules
Generating Rule:
Collect Service Check Data Source Module Events
Event Number:
11771
Level:
Warning
Logging Computer:
sce01.xxxxxx.com
User:
N/A
Description:
Error getting state of service
Error: 0x8007007b
Details: The filename, directory name, or volume label syntax is incorrect.
One or more workflows were affected by this.
Workflow name: Microsoft.SQLServer.2008.DBEngine.FullTextSearchServiceMonitor
Instance name: ESSENTIALS
Instance ID: {023CAC69-7B83-207A-5F48-D808815B4919}
Management group: SCE01_MG
Event Data:
View Event Data
< DataItem type =" System.XmlData " time =" 2010-02-04T05:19:14.0140371-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SQLServer.2008.DBEngine.FullTextSearchServiceMonitor </ Data >
< Data > ESSENTIALS </ Data >
< Data > {023CAC69-7B83-207A-5F48-D808815B4919} </ Data >
< Data > 0x8007007b </ Data >
< Data > The filename, directory name, or volume label syntax is incorrect. </ Data >
</ EventData >
</ DataItem >

also here's this weeks critical errors from SCE by SCE
Date and Time: 2/24/2010 9:55:44 AM
Log Name: Application
Source: Windows Server Update Services
Event Number: 13002
Level: 1
Logging Computer: sce01.xxxxxxxxxx.com
User: N/A
Description:
Client computers are installing updates with a higher than 25 percent failure rate. This is not normal.
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T09:55:44.1666165-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > Client computers are installing updates with a higher than 25 percent failure rate. This is not normal. </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 4:25:43 PM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 11852
Level: 2
Logging Computer: sce01.xxxxxxxxxxxxxxxx.com
User: N/A
Description:
OleDb Module encountered a failure 0x80004005 during execution and will post it as output data item. Unspecified error : Login timeout expired Workflow name: Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor Instance name: sce01.xxxxxxxxxxx.com Instance ID: {5B7CC866-45FF-A2AE-8D33-0AC661F68861} Management group: SCE01_MG
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T16:25:54.2642632-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor </ Data >
< Data > sce01.xxxxxxxxxxx.com </ Data >
< Data > {5B7CC866-45FF-A2AE-8D33-0AC661F68861} </ Data >
< Data > Login timeout expired </ Data >
< Data > 0x80004005 </ Data >
< Data > Unspecified error </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 10:47:13 AM
Log Name: Operations Manager
Source: Health Service Script
Event Number: 4001
Level: 1
Logging Computer: sce01.xxxxxxxxxxxxxxx.com
User: N/A
Description:
GetSQL2008BlockingSPIDs.vbs : Cannot login to database [sce01.xxxxxxxxxxxxxxx.com][ESSENTIALS:master] .
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T10:47:15.8121021-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > GetSQL2008BlockingSPIDs.vbs </ Data >
< Data > Cannot login to database [sce01.xxxxxxxxxxxxx.com][ESSENTIALS:master] . </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 10:46:05 AM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 11852
Level: 2
Logging Computer: sce01.xxxxxxxxxxxx.com
User: N/A
Description:
OleDb Module encountered a failure 0x80004005 during execution and will post it as output data item. Unspecified error : [DBNETLIB][ConnectionOpen (PreLoginHandshake()).]General network error. Check your network documentation. Workflow name: Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor Instance name: sce01.xxxxxxxxxxxxx.com Instance ID: {5B7CC866-45FF-A2AE-8D33-0AC661F68861} Management group: SCE01_MG
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T10:47:14.1579111-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor </ Data >
< Data > sce01.xxxxxxxxxxxxxxxxxxx.com </ Data >
< Data > {5B7CC866-45FF-A2AE-8D33-0AC661F68861} </ Data >
< Data > [DBNETLIB][ConnectionOpen (PreLoginHandshake()).]General network error. Check your network documentation. </ Data >
< Data > 0x80004005 </ Data >
< Data > Unspecified error </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 3:50:12 PM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 31400
Level: 1
Logging Computer: sce01.xxxxxxxxxxxx.com
User: N/A
Description:
An exception occured processing a group membership rule. The rule will be unloaded. Subscription ID: 1ac6ba80-bb85-4699-82a2-f3c584b06965 Rule ID: bb91657f-32db-4f72-2ed6-e7ac94f0e167 Group ID: b20e0f37-c8d3-afcc-e21e-473b019fd826 Group type name: Microsoft.Dynamics.AX.Management.Pack.DynamicsServer.Group Exception: Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Invalid property name: IsDynamicsInstalledAttribute_CE6F4AC6_0A15_BE42_323A_65A3BC8AB307 at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.GetColumnDefinitionForProperty(String propertyName, QueryDefinition queryDefinition) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicate(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.CreateCriteriaTextAndParameters(SqlCommand sqlCommand, QueryDefinition queryDefinition, XmlReader criteriaReader, XmlNamespaceManager xmlNamespaceManager) at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlCommandBuilder.CreateCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, String criteriaXml, Dictionary`2 parameterValues) at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.CreateSqlCommandForSelectType() at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.QueryGenerator.ExecuteSnapshotQuery(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.EligibleBySnapshotResults(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.GetRelationshipChangesForSnapshot(MembershipRule membershipRule, Guid groupInstanceId, Guid groupTypeId, Guid relationshipId, IList`1 groupKeyNameValuePairs, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateSnapshot(MembershipSubscription subscription, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipCalculationManager.SnapshotCalculation(MembershipSubscription membershipSubscription, DatabaseConnection databaseConnection)
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T15:50:12.2844774-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > 1ac6ba80-bb85-4699-82a2-f3c584b06965 </ Data >
< Data > bb91657f-32db-4f72-2ed6-e7ac94f0e167 </ Data >
< Data > b20e0f37-c8d3-afcc-e21e-473b019fd826 </ Data >
< Data > Microsoft.Dynamics.AX.Management.Pack.DynamicsServer.Group </ Data >
< Data > Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Invalid property name: IsDynamicsInstalledAttribute_CE6F4AC6_0A15_BE42_323A_65A3BC8AB307 at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.GetColumnDefinitionForProperty(String propertyName, QueryDefinition queryDefinition) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicate(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.CreateCriteriaTextAndParameters(SqlCommand sqlCommand, QueryDefinition queryDefinition, XmlReader criteriaReader, XmlNamespaceManager xmlNamespaceManager) at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlCommandBuilder.CreateCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, String criteriaXml, Dictionary`2 parameterValues) at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.CreateSqlCommandForSelectType() at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.QueryGenerator.ExecuteSnapshotQuery(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.EligibleBySnapshotResults(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.GetRelationshipChangesForSnapshot(MembershipRule membershipRule, Guid groupInstanceId, Guid groupTypeId, Guid relationshipId, IList`1 groupKeyNameValuePairs, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateSnapshot(MembershipSubscription subscription, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipCalculationManager.SnapshotCalculation(MembershipSubscription membershipSubscription, DatabaseConnection databaseConnection) </ Data >
</ EventData >
</ DataItem >

Create Data Source Module using OMB

I am not seeing how to create Data Source modules using OMB. I am assuming there is a property of OMBCREATE ORACLE_MODULE that I am overlooking. If anyone can provide assistance, it would be greatly appreciated.
Thanks,
craig

Hi,
Yes, there is a OMBCREATE command for creating Oracle Modules. And as per the Scripting ref Guide ( Page 4-157 owb 9i scripting guide) -
OMBCREATE ORACLE_MODULE 'src_module' SET PROPERTIES (DESCRIPTION, BUSINESS_NAME) VALUES ('this is an Oracle module', 'source module') This will create an Oracle module named "src_module", its description is "this is an Oracle module", and business name is "source module".
HTH
Mahesh

How to create plugin modules ?

I have a swing gui with a textfield and textarea in a frame. Some command is entered into the textfield and a method within the frame's source code would be called to match the command to a set of if else loop to see if the command is correct before executing. It's some sort like creating a command prompt. The textarea displays the input and the results. How should I create some sort of codes with so that I can extend the commands inside with more commands by adding new jar file plugins and how do I create some sort of a jar file plugin ?

I looked through Spring web page and most of the stuff talks about web apps. I am not very familiar with these IoC although I tried to read and understand it.
I was wondering, if you have a GUI application with a task bar that allows you to plugin(jar file), and when you added the plugin, how does the application detects your plugin and updates the tool bar with the icon you specified in your tool bar. One thing i don't really understand is when you hit the updated new button on the tool bar, how does it call the method with the jar file plugin ? I know that every button in the tool bar, like all buttons, need an action event or something like that with the method inside it to actually call it.
I have been wondering how applications with plugin modules , like NetBeans and Eclipse, could dynamically add a button into their tool bar and menu bar and when called, they can 'link to' the plugin to call it ?

Source Module issue

Greetings,
I am in the process of migrating from Forms6i client/server to Forms10g. I am now at the stage where I am compiling the forms on the OAS server. There is a form called default.fmb which is the source for all the forms that need to be compiled. Some of the forms compile correctly whereas some do not. I have determined that the source module for some of the forms is DEFAULT while others are default. The file on the OAS is default.fmb which means the forms that have a source module of DEFAULT will not compile.
How do I change the source module from DEFAULT to default?
Regards,
Bill Chadbourne

Not really.
the jDAPI is a Java-API which can be used to modify any source-setting you can also set via the Forms-Builder. When you install the devloper-suite, the JDAPI is also installed. As fas as i remember there is also a little sample java-program shipped. If not, search the forum, there are some examples.

Unable to load local objects, source module, source objects

Hi ,
I am facing problem while opening a custom form currently running in forms4.5 in forms6i. I get the following error
FRM18108: failed to load the following objects
Local Object : current_record_indicator
Local Object : text_item
Local Object : text_item_display_only
Local Object : creation_or_last_update_date
Local Object : display_item
Local Object : block
Local Object : canvas
Local Object : LOV
source module : APPSTAND
source object : STANDARD PC_AND_VA
source_object : STANDARD_TOOLBAR
Local Object : window
Local Object : module
I'll appreciate if somebody can give some suggestion on how this problem can be eliminated from taking place....
Thanks in advance
Ajay

Ajay,
I am having the same type of problem with 4.5 custom forms when trying to convert them to 6i. FRM-18108
If anyone can help out, I would appreciate it.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ajay Srivastava:
Hi ,
I am facing problem while opening a custom form currently running in forms4.5 in forms6i. I get the following error
FRM18108: failed to load the following objects
Local Object : current_record_indicator
Local Object : text_item
Local Object : text_item_display_only
Local Object : creation_or_last_update_date
Local Object : display_item
Local Object : block
Local Object : canvas
Local Object : LOV
source module : APPSTAND
source object : STANDARD PC_AND_VA
source_object : STANDARD_TOOLBAR
Local Object : window
Local Object : module
I'll appreciate if somebody can give some suggestion on how this problem can be eliminated from taking place....
Thanks in advance
Ajay<HR></BLOCKQUOTE>
null

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

Issue with Sourcing module in R12.1.3

We arein R12.1.3 with Linux, user after logging to Sourcing Module Super module then user As soon as click Requisition Tab , getting the
Following message, i tried to find any hints, but i am not able to find out .
Detail 0 ## oracle.apps.fnd.framework.OAException: Unknown action: null at oracle.apps.fnd.framework.OAException.wrapperInvocationTargetException(OAException.java:1003) at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:211) at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(OAApplicationModuleImpl.java:720) at oracle.apps.po.common.webui.ClientUtil.executeServerCommand(ClientUtil.java:152) at oracle.apps.po.autocreate.webui.DocBuilderSideCO.initFormItems(DocBuilderSideCO.java:622) at oracle.apps.po.autocreate.webui.DocBuilderSideCO.processRequest(DocBuilderSideCO.java:144) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:600) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252) at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:989) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252) at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1182) at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252) at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252) at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353) at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2607) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1940) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431) at OA.jspService(_OA.java:212) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:619) oracle.apps.fnd.framework.OAException: Unknown action: null at oracle.apps.fnd.framework.OAException.wrapperInvocationTargetException(OAException.java:1003) at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:211) at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(OAApplicationModuleImpl.java:720) at oracle.apps.po.common.webui.ClientUtil.executeServerCommand(ClientUtil.java:152) at oracle.apps.po.autocreate.webui.DocBuilderSideCO.initFormItems(DocBuilderSideCO.java:622) at oracle.apps.po.autocreate.webui.DocBuilderSideCO.processRequest(DocBuilderSideCO.java:144) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:600) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252) at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:989) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252) at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1182) at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252) at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252) at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353) at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2607) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1940) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431) at OA.jspService(_OA.java:212) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:619)

Hi,
If the username is atually on the rows you want to limit (rather than the more usual way where it would be a foreign key to another table holding the employee info) then you can just set up a filter on the table.
There is a system session variable called USER which holds the username of the currently logged in user, so you could set up a filter something like this:
<business model name>.<logical table name>.<logical column name> = VALUEOF(NQ_SESSION."USER")
If you actually have the situation where it is the ID of the owner stored on the table rather than the actual user name (seems more likely to me), then you will need to create a new session variable and intialisation block to do the lookup and get the Id for the currently logged in user, then just substitute that variable name in above.
There's a short article that might help on my blog:
[http://obiee-tips.blogspot.com/2009/09/obiee-security.html|http://obiee-tips.blogspot.com/2009/09/obiee-security.html]
Regards,
Matt

ME05 How to schedule source list job with steps?

Can someone please give me instructions on how to create source list ME05 in background using "Steps"? I know how to create a background job in ME05 but need to have several jobs run back to back in the middle of the night. I am reluctant to shedule them at different times and would prefer to use the "Steps" function. Thanks for your input!

Hello
Steps:
First create variant for the report in normal execution mode (to provide input selection parameters in backgrpund)
1. Transaion code SM36
Give Job name you want created (Give some meaningful name) and Press enter
2. Give the ABAP program name
3. Select variant and save the selections
4. Come back to initial screen , select the Start condition button and provide the interval as per requirement to schedule the job and save.
5. Save the job.
Check the Job in SM37 and relase the Job.
warm regards
Rama

How to configure Application module pooling?

I want to know wheather bc4j container itself manages Application module pooling if yes then please tell me is there any file to set parameters for congiguration like one which we have for apache web server.
If no then please let me know how to create applicatiom module pooling.
Thanks in advance.

Application module pooling is configurable through an application module configuration. In order to edit an application module configuration you may right click an application module and select Configurations...
The BC4J data web beans and the BC4J JSP datatags are both application pool clients. The BC4J documentation includes descriptions of the application pool properties. The documentation also includes a code sample which illustrates how to write your own pool client.

How to write source code in smart forms?

hi friends,
can anyone can help me in writing sorcecode in smartforms r
any materail link.
if it is helpful points can b rewarded.Thanks in advance.

Hi,
Check this link for
how to write source code in smart forms?
http://****************/Tutorials/Smartforms/GettingStarted/SimpleText.htm
You can write Source Code in smartforms By Choosing Program Lines.
Check this link with Screen Shots
http://****************/Tutorials/Smartforms/PO/page1.htm
Reward All Helpfull Answers
Regards
Fareedas
Edited by: Fareeda Tabassum S on May 21, 2008 3:09 PM

How to OMBEXPORT source modules ?

Similar Messages

Maybe you are looking for