How to only allow certain users to use internet?

Hello, I've recently taken over the job of overseeing the internet connection here in my building. We have a shared internet connection and I was told to just give out the same WEP key to everyone. The problem now is that many people have canceled, but the WEP key still works. I want to make sure that only people paying for the service are using it. What is the best way of doing this?
1. Generate new WEP keys? I think I can only generate 4. Is there a way of generating more?
2. Block certain "Device Numbers" or "mac addresses?"
I really know very little, so any help would be really appreciated.

change the wep key first and then go to the go to the wireless and then on wireless network access (on the set-up page of your router) and click on the button select MAC address of networked computers and it will display the mac address of the client's that was able to connect using the new key and so you can just easily copy it on the permit only MAC address box to flter the connectoin. So it's much easier than askign each 1 of the client's for the mac address.
Do this right after dissemnating the new wep key to the clients,

Similar Messages

How do I only allow certain users to print in color?

Product Name: HP Color LaserJet Professional CP5225dn Printer (CE712A)
Operating System Installed: Windows 7 Enterprise (64bit)
I work at a K-12 school and purchased the HP Color LaserJet Professional CP5225dn Printer (CE712A) for use in our computer lab. I would like to know if it is possible to have it so that only certain users can print in color (possibly put a password on it). I know the cost for color is higher, and therefore, would like it so that students have to approve through teacher if they want to print in color.
We are running it on our Print Server (networked) not through USB.
Thank you for the help.

Hi,
That's a very good question actually. In my corporate networks, we are talking about hundreds of laser printers and the ONLY thing we can do: only allow people access to a set of mono laser printers, not all printers. For example, the following printer is using B&W as default but can't stop users to print in colors if they could access to the resourse:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I allow another user to use office for mac

I installed Office 365 while I was the only user but now I have added another user but they cannot access office, how do I give them permission?

Hi,
I have tried to recreate this myself, and your right even after changing ownerships and movie the iPhoto library to the public folder ( Harddrive/Users/Sharing) the second account is still not allowed to access the library. This is strange behaviour because moving the iTunes Music Library to Sharing does allow all users to access the library.
All I can suggest is that you deselect the option in iPhoto preferences (Advanced) to "copy files to iPhoto library" then store your photos in a folder that resides in the Harddrive/Users/Sharing folder - then your wife can use the import command to add them to her copy of iPhoto (she should also deselect the copy to library option)
Regards

How can I allow network users to use File Sharing on 10.8 Server?

I am in the process of setting up a new OS X 10.8 Server. I have exported/imported the network users from my previous OS X 10.6.8 Server using Workspace Manager. I have re-entered the passwords of the users. I have existing clients running (stil logged in).
I have set up the File Sharing service in Server.app. I have several mount points. I have made the Users mount point available for home directories over AFP.
Now, the system administrator can connect to the server and get access to the file shares. So the basic file sharing system works.
Also: the users on a client can get there password verified (e.g. when unlocking screen protection) by the server. It is just AFP they can't get access to, while the system administrator account (OD /Local on the server) can be used. So, the password in the server is OK too. It seems to be a matter of privileges.
But no network user (OD user in directory /LDAPv3/127.0.0.1 on the server) can get access. Where can I give network users privileges for File Sharing on the server?
I did try to add either the "Open Directory Users" group or a specific user that was imported into com.apple.access_afp. If I do that, there is partial success. I can connect to the server from the client with a user account other than system administrator from the server (but connecting is slow). But Mobile Home Sync does not work:
1:: [13/04/05 16:11:10.379] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:11:20 +0000
1:: [13/04/05 16:11:20.782] ==========================================================
0:: [13/04/05 16:11:20.782] Starting automatic sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:20.786] Peer "network" reports changes since last sync.
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:alias:]: isRemote = NO
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: peer = <SPeer_FS:0x7fd5a5009520> = local, optionalStoreID = (null), peer.storeIDString = *
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootPath        = /Users/gerben
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: storePath       = /Users/gerben/.FileSync/store.filesyncstatetree
1:: [13/04/05 16:11:20.787] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootAlias       = {path='/Users/gerben', targetName='gerben', volumeName='Macintosh HD', type=DIR, volumeCreateDate=2010-08-10-12:58:16, targetCreateDate=2011-08-28-18:39:13, parentDirID=37638, nodeID=3003598, filesystemID=0000 ('0000'), signature=0x482b ('H+'), isBootVolume=YES, isAutomounted=NO, isEjectable=NO, hasPersistentFileIDs=YES, mounted=YES, url='file://localhost/'}
0:: [13/04/05 16:11:20.789] -[SPeer_FS _mountServerCallbackShares:status:]: received error 64
0:: [13/04/05 16:11:20.790] EXCEPTION: _mountServerCallbackShares:status: (Host is down) <-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64">
0:: [13/04/05 16:11:20.790] USERINFO: {
0:: [13/04/05 16:11:20.790]     NSLocalizedDescription = "Host is down";
0:: [13/04/05 16:11:20.790] }
0:: [13/04/05 16:11:20.790] BACKTRACE: {
0:: [13/04/05 16:11:20.790] ? | 0x105cb79b7
0:: [13/04/05 16:11:20.790] ? | 0x105cbf0e5
0:: [13/04/05 16:11:20.790] ? | 0x105c2c866
0:: [13/04/05 16:11:20.790] ? | 0x105c2babd
0:: [13/04/05 16:11:20.790] ? | 0x105c2acb4
0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb72a
0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb6a2
0:: [13/04/05 16:11:20.790] ? | 0x7fff874cf8bf
0:: [13/04/05 16:11:20.790] ? | 0x7fff874d2b75
0:: [13/04/05 16:11:20.790] }
1:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. (-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64")
0:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. Not enough peers will be available to continue syncing.
0:: [13/04/05 16:11:20.790] Aborting sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:20.790] -[SPeer abortSync] "local"
1:: [13/04/05 16:11:20.797] -[SStore_FS setupWithAlias:andRef:] (Store-FS.m:447): unlink('/Users/gerben/.FileSync/.fstemp.QW1Gh-bhvgEhVwmG3.noindex')
0:: [13/04/05 16:11:20.798] EXCEPTION: !IF <-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'">
0:: [13/04/05 16:11:20.798] BACKTRACE: {
0:: [13/04/05 16:11:20.798] ? | 0x105c2bb66
0:: [13/04/05 16:11:20.798] ? | 0x105c2acb4
0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb72a
0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb6a2
0:: [13/04/05 16:11:20.798] ? | 0x7fff874cf8bf
0:: [13/04/05 16:11:20.798] ? | 0x7fff874d2b75
0:: [13/04/05 16:11:20.798] }
1:: [13/04/05 16:11:20.798] -[SStore_FS deleteStateTreeTurdFile] (Store-FS.m:476): unlink('/Users/gerben/.FileSync/store.filesyncstatetree.statetree_dirty')
1:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. (-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'")
0:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. Not enough peers will be available to continue syncing.
1:: [13/04/05 16:11:20.798] EXCEPTION: SFAbortedException <-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'">
1:: [13/04/05 16:11:20.798] -[SSyncEngine threadMain_SyncEngine_sync:]: sync failed with exception "-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'"".
0:: [13/04/05 16:11:21.066] Sync of "HomeSync_Mirror" encountered errors. (_mountServerCallbackShares:status: (Host is down))
0:: [13/04/05 16:11:21.067] Last successful sync completed at 2013-04-04 20:17:15 +0000.
0:: [13/04/05 16:11:21.067] Finished sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:21.067] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:31:21 +0000
1:: [13/04/05 16:11:21.284] 1-pass sync of "HomeSync_Mirror" took 0.02 seconds

Hi Gerben,
Try creating a brand new user, that's not imported and see if that works. Every user/group has a little gear in the Server.app/Users or Groups which allows specific access to specific services, perhaps filesharing is off in that section?
Is your DNS setup properly? Can you verify that clients can see the FQDN of your server?
After setting up the Users folder for mobilehomes, did you check whether the group and the separate users have access to filesharing? I am able to select the correct homefolder /Users and restrict the homefolder size.
Goodluck!
Jeffrey

How can we allow internal users to access internet through ASA firewall?

Hello,
I am new to security track, i have been asked to setup lab and allow users from inside firewall to access internet. here is my lab setup
PC -> switch 1 (layer2) -> (inside) ASA (outside) -> switch 2 (Layer2) -> Router
does switch 2 port needs internet access through router?
what configuration required on ASA to allow users behind the firewall to access internet?
any help on this would be much appreciated.
thanks,

Hi,
Okay , can you clarify on this for me. Are you able to ping the internet from the ASA outside interface ?
Just try something like this:-
ping 4.2.2.2 .. Does this work ?
If this does not work , then i think the ASA even is not able to get to the internet and that would be a problem on the router.
Also , internet from Switch 2 is not a requirement as that is only a Layer 2 device.
You can assign the ISP allocated address on the PC , connect it to the Switch 2 port and then try to ping something on the internet or surf internet and i think that should work.
Thanks and Regards,
Vibhor Amrodia

How can I allow or block the use of local storage by specific sites for all users in my domain.

How can I allow or block the use of local storage by specific sites for all users in my domain.
I tried to do this by MMS.cfg but it is not working, the problem is also described in your blog "http://forums.adobe.com/message/3272907".
What I Want -: "I want to allow youtube for all the users in my domain and this should be listed in Control panel-->flash player-->storage-->local storage setting by site-->websites tab."

Wow, cor-el... Did you -intend- your reply to be inane, inappropriate and completely inapplicable?
How would that possibly do what I asked?
You -might- consider '''''reading''''' the question, -=before=- you reply. And it's really okay to NOT REPLY if you just don't know. Just an idea.
Feel better, real soon.

Allow certain users to capture quotation after bid end date

Hi
Is it possible to allow certain users to be able to capture quotation on behalf of suppliers using surrogate bid after the end date has been reached but before the opening date? How would I do this?
Regards

Hi
As the end date and opening date are at the header level common to all bidders/vendors, we cannot manually capture quotation for specific suppliers using surrogate bidding. I dont think there is even a BADI for this.
Rgds
Reddy

New to mac , when i imported pictures on my account , i noticed the family user account can not view pictures in iPhoto why is this and how do i allow other users on my mac to view the pictures

how do I allow other users to view pictures in iphoto on my computer?? can only view pictures when signed in administrator account?

Try Here > http://www.apple.com/findouthow/photos/#intro
More Info Here for the New Mac User...
Mac essentials http://support.apple.com/kb/HT2477
PC to Mac video http://support.apple.com/kb/VI207
Find Out How (Video)
http://www.apple.com/findouthow/mac/

How can I allow other users on my macbook to view my iphoto library when th

How can I allow other users on my macbook to view my iphoto library when they are logged in. I do not have a network, and the users (my family) all log in seperately when they use the computer. Does anyone know? Thank you.

rdoss
Welcome to the Apple Discussions.
If you want others to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account(s). In the other account(s), enable 'Look For Shared Libraries'. Your Library will appear in their source pane.
Remember iPhoto must be running in both accounts for this to work.
Regards
TD

How do I allow my users to set the option to save a new timezone for future sessions?

The option to save a newly selected timezone for future sessions has been greyed-out
in the Calendar Client. How can I allow my users to choose this option?
<P>
This is controlled by the settimezone setting on the Calendar Server. By
default, it is set to FALSE. You can change the value to TRUE in the
unison.ini settings. The
Calendar Server must be restarted for the change to take effect.

Hi,
Based my research, OOB SharePoint don’t allow anonymous users to contribute contents(Edit, Upload and Add) into list and library.
This is by design behavior, and it’s a consideration about security in order to help protect your site from potential script injection attacks.
For anonymous users, only the View Item permission is available for libraries.
If you want to know more about this, please refer to
http://office.microsoft.com/en-us/windows-sharepoint-services-help/enable-anonymous-access-HA010113018.aspx
Hope this helps
Thanks!
Stanfford

How can I allow a user (client) to choose a local image file (on his hard d

How can I allow a user (client) to choose a local image file (on his hard drive) and modify it using an applet from his browser ? I am trying to develop a web page that enables the user to choose an Image file, manipulate the image using a java applet, and display the results.
Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. On the other hand, I can choose and upload any file using a JavaScript form:
<FORM METHOD="POST" ENCTYPE="multipart/form-data" ACTION="process.asp">
<INPUT TYPE=FILE NAME="file1"><BR>
�
It seems that I can choose an image file with a Java script form and process an image with an applet. How can I choose a file AND process it locally ?
(I do not wish to upload the file to the server using JavaScript form and then back to the client�s applet for processing since it will be a tremendous waste of resources).
Will appreciate any solution.
Thanks !
( my email is: [email protected] )

"Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. "
You can do this if you sign the applet...

How can i allow certain people to reply to forum post?

Hi all, how do i allow certain group of people to reply to forum post instead of everyone can reply? Any help would greatly appreciated.

Hello
You can secure the forum and subscribe group of people to the secure zone , by this only the subscribers will be able to view the forum and reply on posts.
You can also enable moderation for topics with which only approved topics will be visible on your site.
For details please refer to this document :
http://kb.worldsecuresystems.com/kb/forum-topics-posts.html
Regards,
Sanjit

How do I allow other users on my wifi to print from their computers?

How do I allow other users on my network (wifi) to print on my printers?

Hi there,
You may find the article below helpful.
iTunes: How to share music between different accounts on a single computer
http://support.apple.com/kb/HT1203
-Griff W.

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards.

Syntax to only allow certain values in column

What is the syntax, when I create a table, to only allow certain values in a specific column ?
create table x
col1 char(1) <- for example, only want to allow Y or N
) tablespace myspace;

That would be a check constraint. Please check the oracle syntax on constraints.
create table x
col1 char(1),
CONSTRAINT check_col1
CHECK ( col1 in ('Y','N') )
) tablespace myspace;

How to only allow certain users to use internet?

Similar Messages

Maybe you are looking for