How to only edit the Sky within an image?

Hi. I'm trying to fathom how you can, say, change the saturation; brightness;..etc of one particular section of an mage instead of the changes being applied to the entire image. Say, I wanted to tweak the adjustments for only the sky within a landscape picture but to leave everything else alone...how would you achieve this?

Thanks for the responses so far. This seems crazy. Here we have a Pro Application like Aperture yet it appears a user cannot do a relatively straight forward task of adjusting a particular area of an image.
Dodge & Burn is ok but doesn't allow me to adjust colour for example?
The colour eye dropper is ok but like you said if you alter the sky (blue) then you end up messing up other blue areas within the image unintentionally.
I am familiar with 'Layers' within Photoshop and was hoping Aperture could do something equivalent. Are 'Stacks' similar to layers? Could you have multiple stacks with each stack addressing an individual aspect of an image then stamp them all into one?
Back to my original question, my friend said Photoshop Elements allowed you to do what I want i.e. select just the Sky for editing by performing a 'Colour Cast' operation.
Is Aperture missing something really obvious?

Similar Messages

  • How do you edit the template image that appears at the top only in portrait mode?

    I am using a customized version of the iBooks Author template which has the space image. I have replaced the images for the book cover, chapter and section. But I noticed that when you rotate the ipad to view the entire TOC, the original space image is still there. How can I edit the template image that appears at the top of the Table of Contents only when you rotate the ipad in portrait view?

    I just tried w/that template - switched to Portrait mode...tapped once to select that image....cut - gone. Switched to Landscape...not there. Back to portrait...still gone.
    What process did you use?
    Can you repeat your issue with a fresh book?

  • I want to use a portion of an iTune song but the section begins 5:48 into the song. How do I edit the sound selection?

    Adding iTune selections appear to be defaulted to start at the beginning of the song, and you just trim the end off. But I want to start my selection within the song. How do I edit the song to appear on the video so that I can use a portion of the song 5 minutes and 48 seconds into the song?

    Here is a reply I provided last week.  Hope this helps. Noreen
    Drag the song in to start of show.  There is an icon that looks like a gear at the beginning of the green song strip.  Click on this to see clip trimmer.  The song will open in the screen on the bottom half of the iMovie screen.  You drag the yellow start line to the place where you want the song to start.  As my children have shown me, watch for the spikes to see the exact place, but listening along works also.  You can trim a song from the beginning and the end so that you only use 30 seconds in the middle, if that is what you want.
    I would also suggest using audio control to fade the song in, especially if you are starting at a loud point.  The default fade in is half a second.  I change that to 1.2 to 1.5, depending on the song.  Also, if one song is louder than the next, you can equalize the volume by setting sound at 120% or whatever you think sounds correct for a specific song.
    When trimming for a song at the end of a slideshow, you may need to drag the black (or any color) screen in to end and set duration for a few minutes so that you will be able to trim the song.  Otherwise, the program will only drag in as much of the song as you have video remaining.  I know that sounds confusing but once you try it, you will see what I mean.  Once you have trimmed the song the way you want it, delete the black screen and fade song to end.

  • HT4910 I have a simple question or 2. 1) how can I see what is on my icloud and how do I edit the data if I do not want it on icloud. 2) I have an app that I would like to update data - it doesn't appear to be doing that, how can I fix that? It is the mob

    1) how can I see what is on my icloud and how would I edit the data that is on it?
    2) I am having problems with an app syncing data with pc - how can I fix that? It is mobile noter.

    Welcome to the Apple Community.
    You can see what's in iCloud collectively at settings > iCloud > storage & back up > manage.... You can only edit the data through the appropriate app (contacts, calendars etc)
    For problems with 3rd party apps, contact the developer.

  • How can i access the stepname within a steps post-expression?

    How can i access the stepname within a steps post-expression?
    i only saw the step-id of the step: Step.TS.Id
    is there a pssibility to get the stepname from the id?
    thank you!

    Hi Fischer,
    use the expression NameOf(Step).
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book mo

    Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book module? I can click into any other text window and edit and change attributes but I am locked out of editing text when it comes to the spine of the book. I spoke to Blurb support and they referred me to Adobe. I spent 45 minutes with support here - no one knew. I am still waiting for a call back with an answer... not holding my breath as it's been a few hours now. HELP!!!

    Thanks for your reply John. I have experienced all the fiddly aspects you mentioned - these are attributes and although changing them requires the skill of a surgeon's hand - it's the actual editing of the text I can't seem to access anymore. The box just won't allow me to do anything except change attributes. Does that make sense? And it's only on the spine where I am having this issue. Puzzled! I have even rebooted the program and just now the computer - to no avail. 

  • How can I edit the password entries?

    How can I edit the values in password manager? Right now for at least one site has the username instead of the password.

    Note that your System Details List shows that you have a user.js file in the profile folder to initialize some prefs on each start of Firefox with a possible feed.snapdo.com infection.
    The user.js file is only present if you or other software has created it, so normally it wouldn't be there.
    You should check its content with a plain text editor if you didn't create this file yourself.
    The user.js file is read each time you start Firefox and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
    *http://kb.mozillazine.org/Preferences_not_saved

  • How do I edit the default settings to always embed fonts?

    How do I edit the default settings in Acrobat Pro XI to always embed fonts?

    Do not use the Std job settings, but use the Press or Print settings. You can also edit the properties of the Job Settings (best done in Distiller) to not exclude any fonts and embed all as subset fonts. Be sure to check the option to continue if embedding is not possible or your creation will fail if you used a font that is not licensed for embedding (Acrobat will only embed fonts that are legally licensed for embedding -- most are, but not all).
    If you edit the Std, you will need to save to a new name. You might use MyStd or such. Then go to the Start>Printers and edit the properties of the Adobe PDF printer to make that settings file the default. If you use PDF Maker, you will have to change the PDF Maker preferences also (PDF Maker seems to use the last selection, not the default in the printer). Hopefully that is clear enough.

  • How do I edit the toolbars (not tool set)? for example remove the open and create button.

    how do I edit the toolbars? for example remove the open and create button. with the customize feature I can only find a way to edit the tool set, but I want to edit and rearrange the whole toolbars, that I have only the features needed on one row, instead of the default two rows.
    Thanks for your help
    Andy

    -> [[Uninstalling add-ons]]
    * http://kb.mozillazine.org/Uninstalling_add-ons
    -> [[Cannot uninstall an add-on]]
    -> Uninstalling Toolbars
    * http://kb.mozillazine.org/Uninstalling_toolbars
    Check and tell if its working.

  • How do I edit the email address that's set-up in my iPad Mail client?  It's at iOS7

    How do I edit the email address that's set-up in my iPad Mail Client Account?  It's at iOS7 and the email address was entered incorrectly; this means the email doesn't work.  There's an Edit button, which causes 3 horizontal lines to apperar at the end of the field, but does not seem to allow me to place the cursor in the field and correct the error.  Unless I can correct this I'll have delete the account and start again so if anyone's able to tell me how to edit that address that would be briliant?  Here's hoping................

    Thanks mabaeyens; it IS the address entered in the email account, on the iPad, but sadly, as explained above, once you get to the Settings > Mail, Contacts, Calendars > Account > tap in the wrong account > Email and then hit edit, the 3 horizontal lines appear at the end of the field but touching the screen within the text of the incorrect address doesn't make the cursor appear, so I can't edit!  Very frustrating obviously.  In the edit mode you can drag the field up and down the page but that's all............

  • How do I edit the iCloud account information on my new iPhone 4?

    How do I edit the iCloud account information on my new iPhone 4? I changed in on the iCloud web site, but it still has the old email address on the phone. The address is not able to change...am I missing something?
    Also, the first time I started the phone, I put my email address instead of my son's address, now when I try to set up iMessage, it asks for my password associated with my address and not my son's address.

    Yes...I tried that and It did work...Thank you.
    Now the other item...iMessage still have my email address and I want my son's address. I have the iCloud registered with his address, I have not found where I can edit that.

  • How do you edit the duration of multiple still images?

    FCP X has a default duration for still images when you import them. After importing, how can I edit the duration of multiple clips?
    I've tried selecting them all, control-click and change duration, but nothing changes.
    BTW I want to make them 5 frames each...
    thanks for any help
    Craig

    Thanks Tom, I've tried that. and nothing happens.
    I presume that I type the 5 in the number sequence thing above the timeline?

  • I downloaded a vector file from Shutterstock. How do I edit the text in Photoshop? If i enlarge the image- the pixels are awful and the image is distorted.

    i downloaded a vector file from Shutterstock. How do I edit the text in Photoshop? If i enlarge the image- the pixels are awful and the image is distorted.

    jessicae28493569 wrote:
    i downloaded a vector file from Shutterstock. How do I edit the text in Photoshop? If i enlarge the image- the pixels are awful and the image is distorted.
    What is the file format of the vector you downloaded?  Custom Shapes have a .PSP extension, and are placed according to this table.
    Preference filenames and locations in Photoshop CC
    They will then be loadable from the Custom Shapes drop down — click on the cog icon > Load shape > Find your downloaded vector.
    Once placed in the image, it will appear as a Shape layer, and can be edited with the Path, and Direct Selection tools (black and white arrows on the toolbar)

  • How do I edit the text in a pdf file that has been converted to a Word doc

    How do I edit the text in a pdf file that has been converted to a Word doc?

    Hi BridgetteJean,
    Please go through this video this explains how to edit text in a pdf document.
    http://tv.adobe.com/watch/acrobat-tips-and-tricks/editing-text-with-the-typewriter-tool/

  • How can I edit the file name of the home page?

    How can I edit the file name of the home page?
    Gr Ammani

    I have a similar issue with regards to the filename...
    When I navigate to my website, it doesnt work unless I actually type the filename at the end of it. Example: type in "www.whitelion.com" (this is my real domain name) and it doesnt work. When I type in "www.whitelion.com/index.html" then it works.
    This is obviously inconvenient because my clients will never know to add the filename to the end of the site.
    Is there any setting or way to get the page to appear by just typing the original domain name without adding the extension?
    Thanks,
    Emelia

Maybe you are looking for