How to open a browser in serverside automatically and run a  servlet

hai
my problem is
i have to open a browser automatically and run servlet in serverside.
          please send me the code .
                             Thanq
                           Guruvulu

Hai,
Uma
Can U tell me the procedure for calling a Servlet in a SessionBean By using NetWeaverDeveloperStdio.
                            Thanqqqqqqqqqqq
                                 Guru

Similar Messages

  • How to open a URL without session ID and reuse the current browser session?

    Hi All,
    I have a question about HTMLDB 2.0
    How to open a URL without session ID and reuse the current browser session?
    That was the behaviour in HTMLDB 1.6 ...
    My usecase for this is the following:
    We have written an issue tracking application, which sends e-mail to the interested users, when something happens.
    In these email we've put a link to some page, with some parameters in the URL.
    The idea is for the user to be easy to click on the hyperlink and to see the details of the ticket.
    When the user clicks on such a link he is directed to a login screen (page 101) and he enters his Username and password, and is then forwarded to the details for the ticket.
    Then he receives another email (e.g. for another ticked). He clicks on the link and :
    a) in HTMLDB 1.6 he goes to the details as he didn't close his browser and session is remembered
    b) in HTMLDB 2.0 he is prompted to enter username, password with the username populated
    Please tell me how can I achieve the same behaviour in HTMLDB2.0 as it was in HTMLDB 1.6.
    I understand this change is somehow security related, althogh I don't understand how. If you can explain this either I would be very happy?
    Best regards,
    Mihail Daskalov

    Mihail - I detailed a couple of approaches here: Re: Application Link
    Scott

  • How to open the browser in a Tab

    How to open the browser in a new Tab when click on the URL.
    My problem is i have one DataGrid that contains
    "Name,Designation,Company URL".
    After running the program Name,Designation,URL are displayed
    in the DataGrid .
    I have Four URL's in Datagrid ,the four URL's are opening in
    the different tabs when the user click on the URL.
    How can i do these three things in Flex.
    Thanks & Regards,
    Srinivas.

    Hi,
    Please check the sample in the URL below.
    http://raghuonflex.wordpress.com/2006/12/07/flex-i-frame/
    Hope this helps.

  • How to open a browse a folder dialog box

    Hi,
    Please tell me,
    how to open a 'browse a folder' dialog box in java SE. I dont need showopenDialog or showSaveDialog methods.
    User have to be prompted to select a folder(not a file), and clicks on 'OK'. That path have to come in a text field.
    In my program user has to give a folder path....

    bhuvanavijayam wrote:
    Thank you very much..........
    i got the answer............ we have to set
    jfilechsr.setFileSelectionMode(1);
    1 -> DIRECTORY_ONLY
    No!
    Never use "Magic Numbers" They may change in a future verison and your code will break. Also anyone who reads your code (that includes you, months/years from now) won't know what the code is supposed to do.
    jfilechsr.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY);Not DIRECTORY_ONLY
    db

  • Whenever I open iCloud it "checks" Contact automatically and I don't want it to store Contacts.

    Whenever I open iCloud it "checks" Contact automatically and uploads Contacts and I don't want it to. How do I get it to open with no selections?
    Regards, Jim Easton

    Go to System Preferences>iCloud and uncheck 'Contacts'.  Note that since the contacts are kept on the server they will disappear from your Mac, so you will need to download them. So you need to follow the following procedure:
    1. Go to icloud.com, the contacts page. Select the top contact, then shift click on the bottom contact to select all. Click the cogwheel icon and choose 'Export vCard'. Save this on the Desktop.
    2. Go to System Preferences>iCloud and uncheck 'Contacts'. Your contacts will disappear from your Mac (but not from the server).
    3. Go to Contacts on your Mac and choose 'Import' from the file menu. Select the vCard file you exported from iCloud.

  • Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

    Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined  settings to run the cd's and dvd's ?

    A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing

    Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing happens. Now I have reinstalled windows but still with the same result. I was using the program for several months without problem until yesterday when it suddenly stopped working. Any suggestions on what to do?

    same question with PS11

  • My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean?  And how can I get my computer back up and running normal?

    My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean?  And how can I get my computer back up and running normal?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk.
    http://support.apple.com/kb/PH5836
    Reset PRAM.
       http://support.apple.com/kb/PH14222

  • How to know whether database(oracle) is up and running at OS level

    how to know whether database(oracle) is up and running at OS level...!!!

    depends on the O/S you are using, Unix or Windows? I would use Korn shell script to monitor the Oracle background process and scripts to check of Oracle is accepting connections.
    This UNIX command will show the number of processes for your instance:
    ps -ef|grep $ORACLE_SID|grep -v grep|grep -v ora_|wc u2013l
    In Windows I would look into services.msc

  • How to open a browser using button?

    Hi,experts,
    I create a button in a view in the WDJ.
    I can get a URL through call a webservice when I click the button and I need open a browser using the URL automatically. 
    How can I do it?
    Best regards,
    tao

    Hi Tao,
    You can use the following method of WindowManager in the action assigned to onAction event of your button:
    wdComponentAPI.getWindowManager().createNonModalExternalWindow(String URL,String  title);
    Regards,
    Ajay

  • How to open a Browser

    Hi Friends,
    Can any tell me how to open browser from SAP.
    Suppose if i type a URL in SAP screen and if i click on that it should open perticlular URL in the browser. Is there any function module for this?
    Thank you
    Regards
    Satish

    You can get an idea from this code :
    CALL FUNCTION 'CALL_BROWSER'
         EXPORTING
              URL                    = 'c:test1.html'
         EXCEPTIONS
              FRONTEND_NOT_SUPPORTED = 1
              FRONTEND_ERROR         = 2
              PROG_NOT_FOUND         = 3
              NO_BATCH               = 4
              UNSPECIFIED_ERROR      = 5
              OTHERS                 = 6.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • How to open a browser from a program??

    How can i open a browser to a specific page from my aplication??

    Or if it's a desktop application, you can use the Runtime class to execute an app. The following will open up MS Access Database. Just change the string to point to the application you want to run.
    String app = "C:\Programs Files\Microsoft Office\Access\Msaccess.exe";
    Runtime rt = Runtime.getRuntime();
    Process p = rt.exec(app);
    p.waitFor();
    Hope that helps!!
    Taji

  • How to open Import Browser options?

    Can someone help me to figure out how to open my Import Settings Browser? Only "file" shows up and no other options.
    I must have pushed a wrong button but can not figure out how to reset it.

    What menu commands or toolbar icons are you using to import?  What do you mean "only 'file' shows up"?
    Can you not click the "Import" icon on the Toolbar?
    Can you not execute the menu command "File➞Import➞ ... "?

  • How to open web browser from midlet on emulator

    Hi,
    I am using Java ME Platform 3.0 SDK. I want to open web browser on emulator.
    What should I do?
    Thanks.

    Hi,
    web browser is not a part of the emulator. The first think you have to do is to download mobile web browser. If you have mobile web browser downloaded go to Java ME SDK 3.0. There is Device Selector window in the bottom left corner. In this window you can see all emulators available in Java ME SDK 3.0. Choose an emulator you want to use and right click on it. In popup menu select "Run JAR or JAD..." action, in file chooser browse you mobile web browser and open it. That's all.

  • I installed Firefox 4.0.1, but when I open the browser, it's clearly still running 3.6...what's wrong/how do I fix it?

    I've installed Firefox 4.0.1 on other computers, and it opened just fine...they were running on Windows, whereas this computer is running on Linux, which might be a root of the problem. If this is so, how can this issue be resolved?

    It seems like I'm still running Firefox 3.5/3.6...
    I installed Firefox 4.0.1 from the Mozilla Firefox main website, and I started it by going to 'Applications' on the computer, then to 'Internet', and then clicked on 'Mozilla Firefox'.
    I did not use a desktop shortcut.

Maybe you are looking for