How to open a E2000 Nat type...

For Xbox 360? currently, whether wired or wireless, my Xbox 360's NAT type is strict, and I am unable to do anything online whatsoever. Is there anyways to set up an exception, or anything that can open my Xbox's connection to my router so I can actually use it online? I just had a Cisco live support member leave a chat session after I stated my problem, I would really like some help with this.

Found this link. Give this a whirl.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&articleid=22385
"Don't fix it if it ain't broken."

Similar Messages

Opening Linksys E2000 NAT type....

I have followed the instructions on several different websites, including this one, yet still my NAT type is strict. I am trying to play Xbox LIVE and it connects, but the messenger constantly disconnects and it takes a VERY long time to get into a game.
I have tried the following links without success:
http://homecommunity.cisco.com/t5/Wireless-Routers/Need-HELP-to-change-NAT-type-to-open-on-Linksys-E...
http://homecommunity.cisco.com/t5/Wireless-Routers/Open-NAT-xbox-live-problems/td-p/337375
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=082ee344b4754044b1ff95fcd78b5305_4576.xml&pid=96&s....
I have tried to set a DMZ, which i remember doing in the past successfully, but somehow it has changed and didnt work out this time. One issue i am having is the IP address on the Xbox is like 192.168.1.xxx, and the IP on my router is 192.168.0.xxx. So i changed the IP to have a 1 instead of the 0 on the 3rd set of numbers, and at that point the xbox just totally lost connection to the router. Does anyone have any ideas or suggestions? Im desperate i have been trying to fix this for a couple months since i renewed LIVE and i feel like ive wasted my money.

this means that your E2000 is connected to a modem/router device.
what you need to do first is to ask your ISP on how to setup your modem to bridge mode and setup your router as the gateway.
once the modem is set to bridge, setup the router, as advised on the links you provided, forwarding ports; and you should be set

Hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me :)

hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me

You will have to configure that with your router. Type your router's IP address in the search/domain bar and allow port forwarding.
What is requiring you to have an open NAT? That issue is usually for gaming consoles, etc.

How do you change the NAT Type to Open?

Hey everyone, I bought the apple AirPort Extreme Base Station (The tall one) and I've bought the xbox one. So I tried joining a party and it didn't work so I checked my nat type and it showed strict how do I make it open ?

You must manually port forward all the ports required because the AEBS does not conform to upnp standard used by MS.
See Tesserax documents for port opening.
https://discussions.apple.com/docs/DOC-3415
Just look up what ports the game requires.
This is the min required for xbox live to work.
Xbox Live requires the following ports to be open:
Port 88 (UDP)
Port 3074 (UDP and TCP)
Port 53 (UDP and TCP)
Port 80 (TCP)
Port 500 (UDP)
UDP Port 3544 (UDP)
UDP Port 4500 (UDP)
http://support.xbox.com/en-AU/xbox-one/networking/network-ports-used-xbox-live
About time apple realise since they don't make consoles anyway it is time to actually help people who do.

How do i change the Nat type 3 to type 2 for my Ps3 on Airport Extreme?

I have search the internet trying to find ways to do this but nothing has helped. Some people tell me to airport utility and then to internet and then to NAT. But, no NAT tab shows up for me. I'm trying to change it from NAT 3 to 2 so it can work better with my PS3. Thank you.

Is your AirPort Extreme the only router in your current network configuration? That is, is it connected directly to an Internet broadband modem and not another router? If so, the following is how you would configure the Extreme for Port Mapping:
1. Reserve a DHCP-provided IP address for the PS3.
Internet > DHCP tab
On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <enter the MAC hardware address of the PS3>
IPv4 Address: <enter the desired IP address>
Click Done.
2. Setup Port Mapping on the AXn.
Advanced > Port Mapping tab
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): <enter the appropriate UDP port values>
Public TCP Port(s): <enter the appropriate TCP port values>
Private IP Address: <enter the IP address of the PS3>
Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
Click "Continue"

PS3 NAT Type

Hi there, anyone have a guide how to open up the NAT type on the PS3 with the HH4, on the main settings/test on the PS3 this is type 2 - used to be type 1 with my old provider. When using COD the NAT is set to moderate. this used to be open, before i got the HH4.
I also set the IP address in the router to static with no success.
Many thanks

I'm not sure how to set up my modem in "pure bridge" mode
Broadband ADSL2+ Modem DM111PSP User Manual - Netgear
Please refer to item #3 on page 13 and also Page 64 in the User Manual, which explain how to do this.
You must configure the modem in Bridge Mode or "Modem Mode" first and then configure the AirPort Extreme to connect using PPPoE. Enter your user name, password, etc., in the AirPort Utility setup, but leave the Service Name area completely blank. Connection should be "Always On" and Disconnect if Idle should be "Never".
You cannot configure the AirPort Exteme to connect using PPPoE unless you first configure the modem in pure bridge mode, or "modem mode".
This is the only way to obtain "Open NAT" using this modem and the AirPort Extreme.

Port Forwarding to change xbox nat type

I have wasted the last 2 hours of my life, trying to figure this out. Ill try to make it short, but bear with me.
xbox nat type is strict. Im fed up with this. Xbox is connected wirelessly to apple base station.
Ive heard you cant get the NAT type to open, but that you can get it to moderate, and thats what im trying to do.
I have successfully given my xbox a static ip address, and then I have gone in and opened up ports to that ip address. A guide i was following said this would work. It made it worse, now i get kicked out randomly, which didnt happen before.
Can ANYBODY give me or find me a step by step guide on how to get my xbox nat type from strict to moderate using leopard and an apple base station.
a fustrated,
-Clay

It is probably your modem that is doubling your NAT. I would set the modem to Bridge mode. That way only the router handles network address translation.

How to change the NAT type to Open on a Imac using bridged connections

Hey everyone I have a problem. I play xbox live with my friends and i just moved and dont have a wireless adapter anymore. so i have bridged connections with my imac and xbox via ethernet. It works perfectly, but the only problem is that when i connect it say that my NAT type is strict. To play with all my friends i need a open NAT type. Does anyone know how to make the NAT type on the Imac open. And i do have a D-link router model DIR-625. When i called D-link they said to port forward, i did and it still didnt work, they said it must be the fire wall on the mac, microsoft said the same thing, that it might be the fire wall. I checked the fire wall and it said "All Incoming connections are allowed".
I would really much appreciate it if someone helped me. Thank you!

Yes, most likely. Microsoft has provided a list of XBox LIVE!-compatible routers. Since the OS X Internet Sharing feature is limited, there is no way to configure port mapping or placing the XBox in a DMZ with it. Typically, you either use a compatible router or configure port mapping/DMZ for non-compatible routers.

WRT120N How to open NAT type PS3 !!!!

Hi i have a WRT120N router.
it goes alrite in connection wise but for my ps3 my nat type is strict which wont let me join
in some of my mate's partie's or host a game. And i REALLY wanna fix it by opening my nat
i've bascially tried everything portforwading but when you save it when portforwarding, it doesn't save like it look's like on the
video's i have seen on youtube. Uhm iv'e done that DMZ thing which also didnt work.
iv'e bascially done everything on youtube and other site's
Im just wondering if it's just the router. Or just the way i have it all setup because my router is setup in
a different room with the computer which is hooked up with the modem and my ps3 is in my room which is a different room and is just connected threw WiFi my connection on the ps3 is wireless obviously. Should i buy a new router or just ring a linksey person ? .it's getting to that point.
And yeah i just wanna get it to open HELP PLEASE !!!!!
GriMxDRiFT3r.

Hi - I think you are wanting to connect your PS3 with an internet cable and go wired , rather than wireless. Going online means being connected to the internet which you have done already only your PS3 and you router have done this wirelessly.
You need to connect your router to your PS3 with a Cat 5 cable - standard ethernet cable, then look at your network settings on your PS3 - set these to a wired connection and choose the auto and default settings through the next pages and see how that works. It was really straighforward when I set mine up.
Hope this helps

How to Open NAT Type on PS3?

How do i open NAT Type on PS3
Need help

When you run the network test on the PS3 what is shown? what NAt type?

XBOX LIVE. HOW TO CHANGE NAT TYPE FROM MODERATE TO OPEN, HELP:(

I am completely stumped. I am not a technical person but I'll explain the best I can. I have an airport express.. that's connected to my westell wirespeed modem which gives wireless internet to all my computers at my house.
i also play xbox. i use the internet sharing feature on one of our mac mini's to connect to the xbox. however, the nat type is moderate. i have no idea how to change this to open. please help cuz its frustrating because i pay 60 dollars a year and i do not get the most of my subscription. for example, i can't join party's or join some games..
and also, i read online that if i put my ip address to the address bar, you could change your nat type. but the problem is, every ip address i put into the address bar, nothing comes up. in my airport utility, it says my ip address is like 10.0.1.1.
i am so confused. please help!!!!!!!!!

I am completely stumped. I am not a technical person but I'll explain the best I can. I have an airport express.. that's connected to my westell wirespeed modem which gives wireless internet to all my computers at my house.
i also play xbox. i use the internet sharing feature on one of our mac mini's to connect to the xbox. however, the nat type is moderate. i have no idea how to change this to open. please help cuz its frustrating because i pay 60 dollars a year and i do not get the most of my subscription. for example, i can't join party's or join some games..
and also, i read online that if i put my ip address to the address bar, you could change your nat type. but the problem is, every ip address i put into the address bar, nothing comes up. in my airport utility, it says my ip address is like 10.0.1.1.
i am so confused. please help!!!!!!!!!

How to open nat type

my xbox 360 NAT type is moderate i wish to make it open
it also told me to open port 3074
can anybody help?

When you run the network test on the PS3 what is shown? what NAt type?

Open NAT type on ps3

When i got my BT home hub 4 in and set my ps3 my nat type was strict... I logged in to the homehub manager and set the ip address as static (i think as thats what id read online to do) anyways it is now on moderate ... How on earth do i get the NAT type to open?? Please help its driving me crazy

Hi Lesleykelly28
This link has no info on the Hub4 but the process should be more or less the same and the Hub 3
http://bt.custhelp.com/app/answers/detail/a_id/32216
give it a try and let me know how you get on.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Open NAT Type help ( CISCO WRV210 )

Hello, can anyone help me open my NAT Type? it says my NAT Types : 2 and that it is Moderate,i really really really want to open it , I Tried going to the Small Business webpage and I Couldn't find anything that's why I came back here, could anynone help me?
My main priority is to open NAT on PS3, Doesn't matter for PC but only PS3, I Tried putting my PS3 and into DMZ With and without UPnP Enable and nothing changed, could anyone please help me?

tell me how i can post the same thing there and i will give you some Kudo

(PS3)Changing NAT TYPE to Open for router WRT150N

I need help chaning the NAT Type to open because I can't play with some of my friends on Playstation. Tell me how please
loans personal

A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time. Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa. It adds security to the network by keeping the private IP addresses hidden from the outside world.
Gaming consoles such as Xbox 360®, PlayStation®3, and Wii™ often encounter NAT related issues resulting to poor gaming experience. This problem is resolved by checking the settings on your router which contribute to NAT issues.
This is due to the built-in firewall of the router and to get past this, you will need to open ports on the router. You may do this by either doing Port Forwarding or Port Triggering. Once the ports are successfully opened, the NAT Type issue will change to Open or Moderate thus, making the gaming console work.
Here is the link which resolve the issue: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2902de6218ed4dc1a4c595595ca1f60a_Resolving_NAT_Typ...

How to open a E2000 Nat type...

Similar Messages

Maybe you are looking for