How to open a logic 7 session with logic pro

How can I open a session that says I need 7.2 or earlier with the current version of Logic Pro? Or, how do you convert the session?

Cool, now you only need the good old key. I myself encountered that a few days ago when installing L9 on my new Macbook Pro, after inserting the L9 installer disk I was asked to insert the key which I hadn't seen for years - but it was where I had put it in 2009 after upgrading to 9 and luckily I also found the booklet with the Serial.

Similar Messages

  • How to open a URL without session ID and reuse the current browser session?

    Hi All,
    I have a question about HTMLDB 2.0
    How to open a URL without session ID and reuse the current browser session?
    That was the behaviour in HTMLDB 1.6 ...
    My usecase for this is the following:
    We have written an issue tracking application, which sends e-mail to the interested users, when something happens.
    In these email we've put a link to some page, with some parameters in the URL.
    The idea is for the user to be easy to click on the hyperlink and to see the details of the ticket.
    When the user clicks on such a link he is directed to a login screen (page 101) and he enters his Username and password, and is then forwarded to the details for the ticket.
    Then he receives another email (e.g. for another ticked). He clicks on the link and :
    a) in HTMLDB 1.6 he goes to the details as he didn't close his browser and session is remembered
    b) in HTMLDB 2.0 he is prompted to enter username, password with the username populated
    Please tell me how can I achieve the same behaviour in HTMLDB2.0 as it was in HTMLDB 1.6.
    I understand this change is somehow security related, althogh I don't understand how. If you can explain this either I would be very happy?
    Best regards,
    Mihail Daskalov

    Mihail - I detailed a couple of approaches here: Re: Application Link
    Scott

  • How do I establish a telnet session with unit under test?

    I am going to the next step as a novice and moving from serial communications to ethernet on my unit under test. I have been all over the help and discussion forums etc and cannot find an answer. I need to open up a telnet session with my unit under test and keep it open to send commands back and forth for control of the unit. Can anyone give me a hint of how I am to establish this communication? I have the IP address and I am using port 23 but I just get the session started and then immediately closed. The sequence of events will be: start the session, the unit will reply with a username and then password, after that I need the session to remain open so I can send commands as if I am sitting at the serial port. When complete the session will then be terminated. Thanks in advance for any help.

    If you want to do telnet using plain TCP, you need to do everything yourself, including the telnet options negotiation.
    RFC 854 should have most of what you need (look towards the bottom).
    Most likely, the server will propose a few options, which you should either accept or reject depending on your needs.
    Easiest is probably to use a packet sniffer on a regular telnet session, then dissect the negotiation to see what that particular server wants.
    RFC 990 has a list of telnet options, look for the section labeled "ASSIGNED TELNET OPTIONS".
    It should be simple to write some code that negotiates with one particular host. It will be more difficult to write a full-blown telnet client that does general negotiations with any type of telnet server.
    I have a small program that telnets to a router to do some configuration. The only thing I reply to the proposed options is:
    "\FF\FD\03\FF\FE\01\r\n" (In \-codes). Translated: "Don't suppress go ahead, Do echo".
    (FF=IAC "Interpret as command", FD=Do, FE=Don't, 01=echo, 03= suppress go ahead.)
    LabVIEW Champion . Do more with less code and in less time .

  • How do I download Logic Pro to a macbook with no disc drive if I previously bought the disc version?

    so basically i bought logic pro 9 a while ago when it came out, and i have it in disc-form. i am thinking of getting a macbook air, or the new macbook pro's which have yet to be announced that will probably have no disc drive.
    how can i get logic pro 9 onto the computer without a disc drive? is there a way to input a serial on the App Store and just download it without it making me pay?
    any help on this is appreciated.

    You can purchase the external USB optical drive. It's an accessory purchase you can make when you buy the MBA. Or you can clone the DVD to a USB flash drive if you have a computer now with an optical drive.

  • After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet

    after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

    YES!!! YES!!! YES!!!
    I got it!!! Yes!!!
    Guys, I've solved my problem about that error -10202 (Selected driver not found).
    I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
    That file is called "U.S. - International.rsrc" and it's stored in the following path:
    "Macintosh HD/Library/Keyboard Layouts"
    So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
    That's the clue!
    When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
    So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
    I hope I can help all of you.
    Regards,
    Renato Veiga.

  • How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro?

    How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro with OSX 10.7.4?
    This message appears: You can't open the aplication LogicPro.mpkg because power pc aplications are no longer compatible.
    Thanks folks

    You should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
    Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly.

  • How do I stop Logic Pro X from trying to load a 32 bit plug-in that's no longer installed

    How do I stop Logic Pro X from trying to load a 32 bit plug-in that's no longer installed?  I noticed it occurring on projects where I used Miroslav Philharmonik. I keep getting prompted when opening the projects. I uninstalled Miroslav thinking it would stop, but it didn't.

    Assuming you are talking about the boxed set of Logic Studio (Logic Pro 9) on DVDs the only solutions are to either borrow or purchase an external CD/DVD drive and use that with your new MBP.
    Amazon sells a very reasonably priced 'Amazon Basics' external CD/DVD drive suitable for the process...
    http://www.amazon.com/AmazonBasics-Portable-External-Optical-Drive/dp/B003M0NT1M /ref=sr_1_1?ie=UTF8&qid=1416924310&sr=8-1&keywords=CD+DVD+external+drive+amazon+ basics
    Do NOT try and copy Logic across from your Mac to your MBP using something like Time Machine or Migration Assistant... 99% of the time, doing so results in all kind of weird issues later on.
    Just install Logic pro 9 plus all it's content from scratch using the DVDs provided with Logic Studio Boxed set.....

  • How can I reset Logic Pro 9 in my iMac 'cos i eraser some presets effects in  mastering list? I need to use again.

    How can I reset Logic Pro 9 in my iMac 'cos i eraser some presets effects in  mastering list? I need to use again.

    You can't, I think. But you can open an old project where it was used, or if you know somebody else with logic, you can ask a copy of the presets and then manually drop them where they belong. What is missing exactly and how did you erase the presets?
    Have a nice day!

  • How can I deauthorize Logic Pro 9?

    Hello!
    I'm going to sell my old MacBook Pro and buy a new one.
    How can I deauthorize Logic Pro 9 on the old computer and authorize on the new Mac?
    Thanks, Max )

    You don't..
    If you started with the DVD version of Logic Studio...You can simply delete the App on your old Mac and then reinstall via the DVDs on your new Mac  remembering to update to 9.1.8 as soon as the install is complete if you are running Mountain Lion or Mavericks on your New Mac...
    Note: Personally, I'd do a full reinstall of OS X on your old Mac using either the OS X DVDs that came with your old Mac or using the recovery partition if you have since installed Mountain Lion or Maverivcks.. on your old mac.. This effectively will revert your mac back to the state it was when you bought it... or to a completely clean OS X install...
    Or, if you bought the App Store version...  of LP9
    You delete the LP9 App from your old mac.. sign out of the App store on your old Mac....and that's it.
    Then on your new Mac, sign into the Mac App Store using the same Apple ID you used to purchase LP9 in the first place and then go to the purchases tab and you will find Logic Pro 9 ready and waiting for you to download and install using the install button under purchases.
    Note: Again, either way I'd do a full clean OS X install on your old Mac is possible as then none of your personal data will be left on your old mac prior to you selling it.

  • How can i install logic pro on my macbook air

    How can i install logic pro on my macbook air?

    Welcome to the Apple Support Communities
    If you bought it in discs, buy the USB SuperDrive or use Remote Disc

  • How I can get Logic pro 7?

    I have used Logic since the day it was "born" till version 5.5 (on Pc). Now I bought Logic pro 9  (& Mac...) and succeeded to load songs from version 5.5
    but when I loaded songs from former version, I think 4.0, I have got a note says that I need version 7 to convert them.
    What am I suppose to do?

    Thanks, but the subject was "How can get get Logic pro 7?"
    I mean can I get it from apple free as a logic 9 user? or there other way?

  • How can i get logic pro x on my n ew imac i have it on my macbook pro

    how can i get logic pro x on my n ew imac i have it on macbook pro

    What do you mean, it's not installing?
    Give more details please... We cannot mind read or see your screen here

  • How do I install Logic Pro 8.0.2 on the latest macbook pro?

    I just bought a new macbook pro retina and realised that it does not have a disc slot
    to put the installation disc in!
    How do I install Logic Pro 8.0.2 on the latest macbook pro?
    Also is there a way for me to upgrade it to Logic Pro X?
    Please help!

    Forget Logic Pro 8 on your new macbook, it will not work. The "upgrade" to LPX will cost you around 200 bucks and can be acquired  via the App Store.
    Have a nice day!

  • I have several Files created in Logic Audio for windows bfreo v 5 wich  can't open in Logic Pro X. Any ideas for a solution to his problem,

    I have several Files created in Logic Audio for windows before v5.5.1 which  can't open in Logic Pro X. Any ideas for a solution to this problem, The Windows files that were created in v5.5.1 open OK.  I lost my XS key during a recent house move so can't update to windows files before trying to open in Logic Pro X
    Swingtones

    If you can open the windows files  in windows you can bounce the tracks out as audio. Then load them in X

  • How do i make logic pro 9 to stop crashing?

    so, i want to know how i can make logic pro 9 to stop crashing it always happen when i have a song set up and then this is what appears.
    besides this i can just see the little midi keyboard thing when you hit CAPSLOCK buttom and i don't know what to do! i try to use the new version but i don't like it please help me :C i was so sad because i had a project almost done and this this happens it happened before but i thought it will stop if i unistall it and install it again. help me please i don't know what to do.

    http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=13%26tasks=true

  • Can't seem to get to garageband 10 projects to open in logic pro x

    Can't seem to get garageband 10 projects to open in logic pro x. I know it should be easy, but it always opens as an empty project without giving any notification of a problem. Earlier versions of garageband seem to transfer fine. However, if i save the earlier version projects as garageband 10 projects, they again fail to import into logic pro x.
    Any suggestions?

    Do you get the Dialog Window (that lets you save the GarageBand Project as a new Logic Project) when you open the original GarageBand Project? After you save it a Progress Bar should appear and then the Project opens in Logic.
    Works on my machine without a problem.

Maybe you are looking for