How to open a selected text link from the keyboard

I'd like to be able to search for some text on a screen, and then open the link that it connects to. The catch is that I want to do so via the keyboard, i.e. without moving the mouse. It seems there should be a way to do this. I've tried every combination of <meta-key> + Return, and every combination of <meta-key> + Down Arrow I can think of, since that seems like a natural place to hide such a shortcut, but to no avail. Anyone know how to do this?

select link =shift+arrow then=>the key next to start and besides cnrtl!

Similar Messages

I would select a link from the drop down on the address bar but the page would not open. I would select it again but the page does not open. I could only reach website by selecting google on most visited list.

After updating AVG anti-virus, I encountered a problem on Firefox. I would select a link from the drop down on the address bar but the page would not open after clicking on it. I would select it again, even double click, but the page does not open. I could only reach website by selecting google or yahoo from my dropdown on the most visited list and then click the website that I want to visit. I would like to do this in one step by just selecting a link from my history on the address bar and select a link instead of going to google and then writing the page I want to visit. What could be the problem? When going to the address bar to select a link to open, why does the site not open? Any help would be appreciated.

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

How can I create a working link from the home page to other pages?

Using iWeb, I created links on the Home page directed to other pages within my web site. The links are located in the main body of the Home page (on the right side) and are not included in the Navigation Menu. The links function correctly when I test them in iWeb, however, the links do not function at all after publishing to the internet.
Within the inspector, I have chosen, Link To: "One of my pages" and the appropriate page is selected.
The links within the gray rectangles do not function. The same links below the gray rectangle links go to a "Page Not Found" page.
See the home page at http://www.daleenstrom.com
How can I make these links function correctly?

Welcome to the Apple Discussions. I've found that using the "One of my pages" often doesn't work. Since you've published the site go to each page, copy its URL and use it for the hyperlink. I've found that to me more reliable.
Are those two links inside the shapes or just on top? Both of those items are one large image file. If you inserted the link in the shape be sure you've selected the text (might take a few clicks to get inside and select it) to use for the hyperlink. Also make sure there are no other objects overlapping each of the shaped with the hyperlinked text.
Also it appears that the entire text box is an image. Turn on iWeb's preferences to display the text image indicator:
Click to view full size
and then you'll see the following on any object that will be converted to text once published:
Click to view full size
The two links below work for me. Be sure to clear your browsers cache (CommandOptionE for Safari) and reload the page.
OT

How can open a html, pdf files from the server (c:\foldername\filename)

Hi all,
I am developing an application. in this app i have to implement RMI.
My problem is this, How can a client open a files from the server.
all the html, pdf files are stored in the server's directory like C:\audit\filename.
There is a folder on the server's C directory which contains all the html , pdf files.
please tell me how can a client open a file from the server using RMI.
Please send me the solution as soon as possible.
Thanks & Regards
Bhavishya

That's doing it the hard way. Why not use HTTP or FTP?

I have an Instacalc from the App store and I have forgotten how to toggle it on and off from the keyboard, does anyone know how?

I can't remember how to toggle my Instacalc on and off using the keyboard. I got it free from the app store, I have a 13" MacBook Air, Yosemite. I must have got the instruction somewhere but I can't remember, could anyone help me please.

Hi. Try this: From the iTunes Store front page, scroll to the bottom of the page. In the bottom left corner there should be a flag, in this case the French flag, click it and you 'll be presented with a screen to select the correct country.
Stedman

How to open new form and exit from the calling form on dual/multi language?

using form 10g 10.1.2.0.2.
i have dual language application 1 english & 1 arabic and i created forms identically each respectedly to call and switch every forms when user choose any language it uses.
say im in currently in english. how we can call the arabic module and exit totally in english module , vice versa?
also the form system messages. how we can switch it between two language?

NEW_FORM() will totally replace the calling module.
Francois

How to open navigate page containing iframe from the iframe context

Hi,
I am using jdev version 11.1.1.6.0.
I have iframe in that i have given source as a url of page. On that page load of iframe page i want to navigate the parent page of iframe to the other page i.e. replace original parent page.
how can I acheive that.
When generally I use following method it redirects to that page.
with url like /faces/oracle/webcenter/portalapp/pages/common/temp.jspx
    public void navigateToUrl(String url) {
        //Redirect to Page with givn url string
        FacesContext fctx = FacesContext.getCurrentInstance();
        ViewHandler vh = fctx.getApplication().getViewHandler();
        UIViewRoot viewToRender = vh.createView(fctx, url);
        fctx.setViewRoot(viewToRender);
        fctx.renderResponse();
    }but in the page load of fragment page its not redirecting parent page or page in the fragment also .
So what is work around to naviagate parent pages.
Any help is appriciated.

Hi,
this here doesn't seem to make sense to me:
I have iframe in that i have given source as a url of page. On that page load of iframe page i want to navigate the parent page of iframe to the other page i.e. replace original parent page.
So you load a page in an iFrame and on load of this page you want it to replace th eparent page in which it loads. So why don't you directly navigate to that page?
Frank

TS3406 All of a sudden, whenever I select an Emoji from the keyboard in an imessage, it does not register and closes out the message. I have tried, backup, restoring, installing, uninstalling. Help! I want my emoji back

Every time I select an emoji to send in a message, my message closes out. I have tried everything, shutting the phone down, re-installing, etc. Help!

Every time I select an emoji to send in a message, my message closes out. I have tried everything, shutting the phone down, re-installing, etc. Help!

How can I get Firefox to NOT use DDE? If I uncheck it in Windows XP "Folder options" it keeps getting re-checked. When checked, it takes minutes to get Firefox to open on a page linked from Outlook.

How can I get Firefox to NOT use DDE? If I uncheck it in Windows XP "Folder options" it keeps getting re-checked. When checked, it takes minutes to get Firefox to open on a page linked from Outlook.

Open link/bookmark in new tab in same window:
*Middle-click (press the mouse scroll wheel) the link
*Ctrl+left click the link
*right-click the link, choose "Open Link in New Tab"
Open link/bookmark in new window:
* Shift+Enter on the link
* Shift+left click on the link
See: http://www.7is7.com/software/firefox/shortcuts.html

Can't open link from the forum which should solve the text replace bug

Can't open link from the forum (http://feedback.photoshop.com/photoshop_family/topics/text_corruption_in_photoshop_cs6_fil e) which should solve the "text replace bug":
http://helpx.stage.adobe.com/photoshop/kb/text-replaced-text-different-layer.html
Anywhere else where I can download thich tech doc?
Thanks in advance

Hi,
Try this link:
http://helpx.adobe.com/photoshop/kb/text-replaced-text-different-layer.html
The one posted needs to be updated.
regards,
steve

Help Please - having difficulties creating af link from the text to an attached file i acrobat

I have been reading the help, but it just wonn't work when I try.
I have tried as followed (I am working with a danish version, and hope to matched the same word as in the english version of Acrobat Xpro):
1. From the toolbox i choose content and then 'hyperlink'
2. I mark the text from which i wish to make a link
3. Acrobat respond with an popup picture 'create a link'
4. From the popup I mark 'Open a side' and push 'next'
5. Acrobat respond with a new popup picture 'create / go to a side'
6. I go to the navigator and open the list with attached file's that I have embedded in my acrobat file.
7. I mark the to which i wish to make a link to
8. In the popup 'create / go to a side' that stilll is open, i push 'Mark hyperlink'
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
How do i do it right?
Please help.

Hello Bernd
Thanks for a quick respond.
This corresponds to the text I have tried myself, but apparently I do something wrong
1.      Open a PDF that contains a PDF file attachment – done
2.      Go to where you want to create a link. If that location is in the file attachment, click the Attachments button in the navigation pane, select the file attachment, and click open.
Here I go to side number 10 from which I wish to make a link from (I am not open the attachment file at this moment, as the location not is inside the file attachment).
(I earlier also tried to mark the attachment file and click open, and It result that the attached file just opened normally without creating a link to the file).
3.      Choose Tools > Content > link, and select the area for the link
Here I mark the text on side 10 from which I wish to make a link to a attached file
4.      In the Create Link dialog box, set the link appearance, select Go To A Page View, and then click Next
Here I have selected ‘Go to a page view’ as told and I click Next
5.      Set the page number and view magnification you want, either in the parent PDF document or in the file attachment, and then click set link.
Here I go to the navigation pane and mark the attached file from the file list (the files in the list hasn’t any side number in the list) and then I click Set Link.
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
What do I do wrong.?
Med venlig hilsen
Mogens Pedersen
Specialkonsulent
T 33 63 13 07
F 33 63 10 11
[email protected]<mailto:[email protected]>
Fra: Bernd Alheit [email protected]
Sendt: 2. marts 2012 13:11
Til: Mogens Pedersen
Emne: Help Please - having difficulties creating af link from the text to an attached file i acrobat
Re: Help Please - having difficulties creating af link from the text to an attached file i acrobat
created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4241290#4241290

How do you create a text link to jump to a row in numbers

Short: How do I create some simple link from Row 1 Cell 1 showing December, to jump my screen down to row 300 for example?
I want to do this because I use numbers for a 365 days per row long spreadsheet, and collumn A B C D E are staff names, it's alike a daily booking calendar for employees for me to see availability.
I have made the top header row of staff names frozen, so when I stroll down I see the staff names above each collumn, useful. I have also added a row under this and want to write each month, e.g. Jan, Feb, Mar and turn those to links, taking me directly to the row in the spreasheet. How on earth does one do this?
I have searched: internal link, simple link to a row, internal shortcut, internal link and others, can not find it in this forum, google or the help.
Thanks
Andy

This script isn't based on a Numbers 09 script so I don't know if it works the same way, but it seems to work ok in Numbers 3.5.
The dates (Jan 1, Jan 2... Dec 31) must be formatted as text, NOT as date and time.
For ease of reference the table is called Holiday Planner. The script must be updated if this is changed.
The top of the table looks like this:
This is the script:
set esc_key to 53
tell application "Numbers"
activate
set the_month to (choose from list {"Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"} ¬
with prompt "Which month do you want to jump to?")
if the result is false then return
set the_month to the_month as string
tell document 1
tell active sheet
tell table "Holiday Planner"
set the_row to item 1 of (every row where ((value of cell 1) begins with the_month))
set selection range to the_row
tell application "System Events"
key code esc_key
end tell
set selection range to the_row
end tell
end tell
end tell
end tell
One cosmetic problem is that when you jump "onwards" in the calendar as opposed to "backwards", the first row of the month appears at the bottom of the window rather than at the top. I'm not sure there's any way of fixing that.
Save the script in your ~/Library/Scripts/Numbers/ folder and then you can run it from the Numbers script menu:
Hope it's useful.
H

How to select multiple addresses from the contacts list to send an email?

How do I select multiple addresses from the contacts list at one time to send an email. Each time I select one, the address book closes and I have to touch the "+" key to open it back to select another address. Is there a way to select all of them at one time instead of making a group? Thanks.

Yes, once you select a person from your Contacts app, you either need to select more from the '+' button or you can tap in the 'to:' field and type in the first few letters of a contact and select from the list. Kinda bummer but gotta make do.

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to open Image path URL link in OA Framework

Hi Friends
I Have the requirement please suggesh me ur idea
1)I have created a SearchPG with two LOV fields if I select a value from the LOV - example -orderno 1233455
It brings data in my table field for that particular ordernumber
My table has column like for example as below
Order_no,po_no ,cust_name ,address,image_path etc
Here in -Image_path column bring data from my DB like EX : \\mycomp\xxxx\yyyy\4\5\7\7\0204755.tif
here this my requirement
Here the Image_path column should be like a link when we click the link it should open and pring a PDF file
Please suggest me what need to be done for my requirement
Your help will be highly apprerciable
Advance Thanks
AT

Hi
what is the bean type of image_path , if it is not a link bean then u should hide this and create a new field of link bean type through personalization , all other mappings like viewinstance and view attribuets should similar to the image_path fields .
Thanks
Pratap

How to open a selected text link from the keyboard

Similar Messages

Maybe you are looking for