How to open AWR in PSE 12 running on XP

I am running Windows XP and understand I must use DNG converter to open AWR files in PSE 12. I have downloaded DNG converter, but still do not know how to open the AWR files. I appreciate any help. Thanks.

The dng converter converts the files to dng copies which can then be opened in pse 12.
For example, in the dng converter dialog, for the source folder you point to the folder with your sony rx100 images and then for destination, choose that folder or a different folder.
Then the dng converter converts your images to dng copies, which can be imported into the pse 12 organizer or opened in the pse 12 editor.
Another thing you could do is install the 8.3 dng converter (to install the needed profiles) and then copy the camera 8.3 plugin to
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
(dng converter 8.3 windows)
C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 12\File Formats
to replace the existing camera raw.8bi already in that folder, then you could just open the native sony rx100 files without the need for the dng converter.
https://workspaces.acrobat.com/?d=uP7Dof8zfUMEhBu-IQsmxQ
After you download the 8_3 Camera Raw.zip, extract the folder and copy the camera raw.8bi file to
C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 12\File Formats
Then hopefully you should be able to open your sony files without having to use the dng converter.

Similar Messages

How to open Ports for App running in VPC

Trying to open ports for a Windows app that I am running via VPC but the application still shows the port is unreachable.
So far I have, opened the port in Mac OSX Firewall, opened ports on my D-Link DSL504G router, disabled the Windows firewall (plus opened the ports in case it became enabled).
Have also redirected the ports to the IP address within VPC Windows and the Mac itself.
Have run out of ideas as nothing seems to work.
Regards
Alan

Try the following ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): <enter the appropriate UDP port values>
o Public TCP Port(s): <enter the appropriate TCP port values>
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How to open front panel of a VI running in RT.

Hi,
I have an application to read the encoder position using the cRIO program. I have made an executable and this application runs as startup application whenever the controller reboots. Right now, i am accessing the VI of the startup exe through Remote Panel connection. This works fine but everytime i close the remote panel , i have to reboot the controller for the next view.
So is there any alterntaive to open the front panel of the VI.
I tried using VIServer but ran into errors. (i tried using front panel -open property node.did not work)
Also i do not have any VIs stored on the controller. Only the exe is stored on the ni-rt/startup folder on the RT controller.
Please let me know how to open this VI.
Thanks.

Hi Ben,
When i close the remote front panel the first time, i am terminating the RT VI which is running on startup.
So i had to reboot everytime to access the remote VI. I guess that the VI (exe) should be continuosly running when the RT is started up. The remote panel only should be opened and closed. After I close the remote panel , i want a windows VI to be opened up.
I have a Windows VI which programmatically opens connection to the RT server for opening the remote panel. The VI runs. When the user clicks Exit on this RT VI, the VI running is stopped and then another windows VI opens up. This works fine for first time. Since the RT VI is terminated, second time , if I run, it says, VI not in server memory.
Is there a method to close the remote panel programmatically in the RT VI itself. I have a Exit button in this RT VI, so if the user clicks, Exit, the program has to be running, but the remote panel has to close. There is a method called close connection to client , but this does not work in RT , as this requires VI path.. Right now , when the remote panel RT VI is launced, to close the remote panel, i click on the 'close' button on the VI title bar. Again when the remote panel is launched, there is no error. but is there a method to close the remote panel in the server(RT VI itself). i have attached the VI.
Thank you.
Attachments:
Dummytest.vi ‏39 KB

Help! How to open PSE 7 without opening catalogue

Tried to migrate from PSE 7 to PSE 9. After catalog conversion the browser seemed to open normally, however crashes in a few seconds. Called the Adobe helpdesk, they come to the conclusion that the catalogue is corrupt, however catalogue functioned normally in PSE 7. Since the catalogue has now been converted, it cannot open in PSE 7 anymore. I was happy having made a back up, but if I want to restore the back up, PSE 7 is automatically opening the old - converted/ corrupt - catalogue and... hangs. Has anybody within Adobe thought of the possibility to open the software without, automatically, opening the catalogue. Seems particulary useful in these kind of circumstances.
I have tried to open and at the same time helding the ALT + SHIFT+ CTRL keys but that does not work.
First of all I d like to migrate with my old catalogue to PSE 9, but at least I would like to still be able to open my old catalogue (back up version) in PSE 7.
Many thanks in advance
Paul
OS: Windows Vista

Ken,
The converted catalog is on its original location (hence original version is overwritten). PSE 7 crashes when opening this catalog.
The backup of the original catalog is on an external drive. Now I want to restore the back-up catalog, my understanding is I need to do this with PSE 7. (I tried it with PSE 9 too but got an error message).
However when I open the PSE 7 software/ organiser it starts automatically to open the converted/ corrupted catalogue and the program crashes...
So key question is: how can I start up PSE without opening automatically a catalogue (then being able to restore the BU)
Thanks for your help.
Regards, Paul

How to open a .pse file in photoshop elements?

Hello,
All my previous files were saved as (.psd). Somehow, one of my photoshop elements projects was saved as a (.pse). I can't open it. How can I re open this file and continue working?
Thanks in Advance

A PSD is the standard working file for Photoshop.
A PSE is a project file for Photoshop Elements. These projects are multiple pages. If you are working with a PSE on Windows, there will be a folder along side your PSE that contains a PSD file for each page of the PSE. If you are missing this folder, you won't be able to open the file. The PSE file itself is just instructions on how to open the PSD files as pages of a project. On Mac, all of these files are wrapped up in a single container.

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Anybody know how to open DSS Player for Mac Update 7.2.6 while running Mountain Lion?

I am trying to download some audio from my Olympus DM-20 voice recorder, which I have not used since I installed Mountain Lion. During the installation, I run into a "Setup.app" which apparently can't be opened "because it is from an unidentified developer." When I open the setup.app, I notice that the date on it is 2009. Could this be the problem?

See the heading "How to open an app from a unidentified developer" on this support page. The instructions apply to installer packages as well as applications.

Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open. The it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

How to open PSE 8.0 photos in 10.0?

I use PSE 8.0 and have 10.0. New SD card photos are available on both, but, I don't know how to get the photos to show in 10.0 that I use easily on 8.0. I want to keep both 8 and 10, but, do not want to risk losing any photos in the process.

Just an update. Removed the 10.0 and reloaded. Stuck at 34% on convert. I
went away for about an hour and coversion had occurred properly and works
fine. Now--My speculative analysis. Possibly the computer could only process
34% due to the large number of photos and if it took 20 plus minutes for
the first 34% to convert before freezing then the NEXT 34% would take 20
plus minutes and I had only been waiting around ten minutes for something to
happen. So, being at supper may have allowed the additional loadings to
occur. Thanks again for all your indulgence and help.
In a message dated 5/9/2012 8:54:42 A.M. Eastern Daylight Time,
[email protected] writes:
Re: How to open PSE 8.0 photos in 10.0?
created by photodrawken (http://forums.adobe.com/people/photodrawken) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4389037#4389037)

How to open directory in run time using java

Hi All
i hava problem for open a directory in run time in java.please help me with code.

Please elaborate what you mean by opening a directory. You can at all times access directory content via the File class.
File myDir=new File(<pathToDir>);
File[] directoryContent=myDir.listFiles();

How to open and close posting period for both material , n invoicing

HI
how to open and close posting period for both material , n invoicing , AM NEW TO SD , SO ALL DOUBTS I DO POST IN HERE PLEASE DONT MIND

Hi Sunaina
Period Open T.code: MMP1
Period Close T-Code: MMPV
Automate the opening of MM periods
How can you automate the monthly opening of MM periods (transaction MMPV - program RMMMPERI) with
SM36?
RMMMPERI accepts a period/year or a date.
If you enter a date the period is derived by it.
1. create a variant and check the attribute 'selection variable' for the parameter date. Then click the button 'Selection variables' and set the current date. Every time this variant is used the parameter DATE is filled with the current date.
2. create a job for RMMMPERI with the variant created in the preceding step. Set it as periodic.
If you're not using a fiscal year variant simply schedule it as monthly (to be executed the first day of the month).
If you are using a fiscal year variant you'd have to define a calendar with only the first day of each period defined as working
day and use it in the periodicity restrictions.
Another possibility:
Write a very simple ABAP which run daily to check if the period has changed and submit RMMMPERI.
Reward if useful to u

How to open and read Excel Sheet from SharePoint 2013 Document Library using C# Visual Studio 2012

Hi,
To achieve these are the steps that I had followed :
1. Add the document Library path into Central Admin -> Application Mgmt -> Manage Service App -> Excel Service App -> Trusted File Locations
2. Add Documnet Library link to Trusted Connection Proivder
3. Open Visual Studio as Run as Administrator
4.Create an SharePoint 2013 Empty Project.
5.Add Service Reference : http:\\<server>\_vti_bin/excelservice.asmx
6.Service added successfully
7.Create a class file and add the Service Reference namespace
There is no such class as ExcelService to call.
Please let me know if somebody knows how to open the Excel file into C#(2012) either using ExcelService or any other way to open. I tried old methods of Sharepoint 2010 server but it's not able to access classes.
Requirement is :
Need to read the excel sheet from Document Library and transfer all data into DataTable.
Please help asap.

Hi,
This is the forum to discuss questions and feedback for Microsoft Office, I'll move your question to the SharePoint 2013 development forum
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/home?forum=sharepointdevelopment
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support

How to open a jasper report (html URL)

Hello,
currently we are testing the jasper report engine. We are already able to open such a report from forms by a forms personalization.
Now we want to run a concurrent report where the output should be a link to a jasper report.
For example:
I start the request "open jasper report" with parameter "001". After successful finishing the request should give me a link like "http://jasper/myreport&parameter=001" which will be opened in a new browser tab.
Well, is it possible to open a URL by using a concurrent request?
Regards,
Josef

Hi Josef;
Please check
How to open an URL with PLSQL FUNCTION?
http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/fnd_utilitiesopen_url-in-forms-personalization-2256431
http://easyapps.blogspot.com/2008/03/image-file-attachment-in-oracle-apps.html
http://www.scribd.com/doc/47603/Form-Personalization-for-R12
Hope it helps
Regard
Helios

How to open a JSP page from a form ??? plz help

hi ..
i want to know how to open a jsp page from a oracle apps form using a button .
the requirement is that whenever we click on the button created on the form, it opens a jsp page.
plz help me ..its urgent !! :-(

In portlet project, to navigate between pages, you should not use the URL property to link to a page. Instead, portlets use navigation via action handling. You use the Page Navigation editor to set up links to pages; that is, the navigation editor sets the action property.
Here is an example to hyperlink ans button to open a new page:
# From within the IDE, create a new portlet project. This action creates the project and one page, PortletPage1.jsp.
# Create a second portlet page, called PortletPage2.jsp, for the project.
# Drop a Hyperlink component onto the first portlet page, PortletPage1. (You can drop the Hyperlink on the page in the Design window or on the PortletPage1 node in the Outline window.) Change the Hyperlink's text property to Next Page.
# Drop a Button component (found in the Basic section of the Palette) onto the second portlet page, PortletPage2.
# Open the Page Navigation Editor. It displays the two pages (PortletPage1.jsp and PortletPage2.jsp) of the application.
# Click the PortletPage1.jsp icon in the Navigation window to expand it, and then drag a connector from hyperlink1 to PortletPage2.jsp. Change the name of the connector from case1 to Page2.
# Click the PortletPage2.jsp icon in the Navigation window to expand it, and then drag a connector from button1 to PortletPage1.jsp. Change the name of the connector from case1 to Page1.
# Run and deploy the portlet. The browser displays PortletPage1 and you should see the Next Page hyperlink. When you click the Next Page hyperlink, the Apache Pluto Portal server displays PortletPage2. Click the Page2 button to return to PortletPage1.
Sherry
Creator Team

How do I fix this error message, The address wasn't understood Firefox doesn't know how to open this address, because one of the following protocols (connectag

We have a new computer and I cannot get my garmin running watch to sync with mozilla. The error message that I keep getting is"The address wasn't understood
Firefox doesn't know how to open this address, because one of the following protocols (connectagent) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address."
Help please

This is for a special URL that starts with
connectagent://
instead of with
http://
is that right?
Two thoughts:
(1) Could you try changing a setting for your Garmin plugin. Here's what I mean:
Open the Add-ons page using either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Plugins.
Find your Garmin plugin change "Ask to Activate" to "Always Activate".
Your system information seems to list two different versions of a similarly named plugin. I'm not sure whether that is causing a problem.
(2) Does Garmin's documentation specify any extra steps to set up Firefox, other than installing its add-ons?

How to open AWR in PSE 12 running on XP

Similar Messages

Maybe you are looking for