How to open C645 to view hard drive that was installed

In June of 2012, I had work done on my Satellite. I am now on my 5th computer since living in Latin America (13 years). None has survived more than 2 years. Approaching my computer's 2nd anniversary, I would like to know what $120 hard drive the repair person installed. I also would like to learn how to replace it should it fail (probable, but not inevitable).
So to begin, how do I open the hard drive bay (and where is it)?

Here's one of the example . Goodluck http://www.youtube.com/watch?v=Hnrv8l5R9Q0
(Everyone was new at one point)
You wanna say thanks ?? click the white star on the right side >>>

Similar Messages

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

How do i recover data from an external hard drive that was accidentally deleted? After I verified the drive, a message appeared that said my drive needed to be repaired. When I tried to access the drive again, the 700 Gigs of music is gone!

How do i recover data from an external hard drive that was accidentally deleted? After I verified the drive, a message appeared that said my drive needed to be repaired. When I tried to access the drive again, the 700 Gigs of music is gone!

Stop using the drive immediately, un plug it.
Buy a copy of ProSoft DataRescue 4 and use it to search for deleted files.

HT201250 Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

I connected my external hard drive that was previously on my pc and everything read fine. I later went on it asked to format and won't read at all on either computer

I connected my external hard drive that was previously on my pc and everything read fine. I later went on it asked to format and won't read at all on either computer

Drive Preparation
1. If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

HT1151 I have my iTunes library on an external hard drive that was connected to a PC, now I want to connect to my new iMac and load the iTunes library onto that computer, can I do that?

I have my iTunes library on an external hard drive that was connected to a PC, now I would like to connect that hard drive my new iMac and load the iTunes library onto that computer, can I do that? Looking for a solution that keeps me from re-ripping my CD collection.

Here are the official Apple Support instructions:
http://support.apple.com/kb/HT4527
Ciao.

If I got a new hard drive on my computer and plugged in the time capsule afterwards, would I be able to recover the information from my old hard drive that was stored on the time capsule prior to the replacement?

If I got a new hard drive on my computer and plugged in the time capsule afterwards, would I be able to recover the information from my old hard drive that was stored on the time capsule prior to the replacement?

This may be of some help to you...
http://pondini.org/TM/14.html
From the FAQs Here...
http://pondini.org

LX800 Series - How To Open Case to Change Hard Drive?

Hi Everyone,
Is there anyone out there that can advise me on the best method for Opening My LX series AIO case , so that I can put a new hard drive in it..
- I have a good image bacup and the Skills to swap the hard drive , I just have no idea on how to open the case.
Sadly , I have searched pretty much everywhere but cannot find a procedure.. and of course its not in the Toshiba manual that I have access to , I am told there are technical manuals but not available to "end users" like me.
I have found instructions for another model on these foroums , but its different as the case is very different , and uses clips.
Would be VERY grateful for any help as I do not want to mess up my case as its only just out of warranty with a "clicking" hard drive that wil not boot.
Thanks in advance..
Solved!
Go to Solution.

Ok , so replaced the hard disk today in my LX800 Series AIO - here is the procedure to open the case - This procedure is quite different from the others (PX Model) I have seen posted at these forums.
1) Lay your AIO flat down on a cloth or blanket.
2) Remove the FIVE main Black screws from the rear Perimeter of the case.
3) Remove the Screw that sits just above the Bar Code label and then remove the DVD/Bluray Drive , by giving it a firm pull.
4) Remove the hidden (Keyboard/Mouse) USB adaptor that sits behind the door at the bottom left had portion of the back of the machine.
5) Once the above USB is removed it reveals a small screw under it - remove this screw.
6) Open the memory access door , there is a small screw revealed - remove this.
7) Remove the Rubber grommet that sits inset into each of the legs.
8) Remove the screws that removing the above grommet reveals.
The back of the case is now held in place by clips around the whole Perimeter. Be very careful and patient and gently pry the two half's of the case apart. I did not have to use a plastic pry tool , as once it go started they just seems to "pop" off one by one, as I worked around. Its not that hard to do if you go easy..
Then you can now see the hard disk , in a silver shield. Quite easy (but a bit fiddly) to replace.
I replaced mine with a direct replacement 1TB hard disk that was a 3.25" but was only 20MM thick , as opposed to the more normal 25mm one. I am not 100% sure that a 25mm one would fit , but I think it may with a bit of fiddling around. But I was very aware of possible heat issues , so went for a direct replacement with the exact same model as Tosh has used.
That's it really , I gave the fan and heat sink a good blow out with Dust off , but after 18 months use they were not to badly clogged..
Please feel free to ask any questions , will gladly help if I can - which is a great deal more than Toshiba were willing to do lol. Will not be buying any of their products in future , as I do expect a modicum of support for basic things like case opening.
Attachments:
SAM_2217.JPG ‏5045 KB

What to do? coudn't open my toshiba external hard drive that I can open before

I have a Toshiba external hard drive that I've been using without any problems before I upgraded my OS to Mavericks...Now I couldn't find the drive anymore but it seems that my mac detects it but it just is not opening it anymore...couldn't find it in my finder window....Anyone who knows how to fix this? Thanks.

Have you reset power on both the Mac and hard drive?
From time to time, during sleep/wake cycles, my network attached drive wouldn't show up in my Fiinder. When I would click to Connection, they would come up grayed out. Cycling power on the Mac didn't really help much. But cycling power on the hard drive unit did.
KOT

How do I use an external hard drive that has been used on a windows machine on my mac....

I have recently just bought a new mac and want to edit files that are currently saved on my external hard drive that I used on my windows machine.
Is there any way to be able to do this or will I have to transfer all files across to my mac and then re-format the external?
Thanks in advance.

Either copy files over, reformat drive from NTFS to a Mac format and copy files back, or tell your Mac how to write to NTFS drives with a third-party product. Tuxera NTFS has high ratings: http://www.tuxera.com/products/tuxera-ntfs-for-mac/

How do I access an external hard drive that shows up in Disk Utility but will not show up in finder or on my desktop?

I have an external hard drive that just stopped showing up one day. Is there a solution to this problem that allows me to secure the data on the drive before reformatting?

I'm having the same problem bpay14, but with a CalDigit VR2 6TB RAID0 external hard drive.
One day it was showing on my desktop, the other it wasn't. And I still didn't update my Mavericks to 10.9.3 (still with the 10.9.2).
It shows up in the disk utility, and I can even Verify the disk and Repair it (but I don't wanna start repairing
something that probably doesn't need to be repaired, so I haven't clicked the Repaid button, only the Verify button) and it says its working just fine.
But it doesn't show in the Finder or the desktop for that matter.
And even if I force disconnect the cable, I get the usual "this disk was not ejected properly" notification
presumingly the disk was mounted on the desktop and I forced eject by unppluging it...
I found a way to force open the disk, through Disk Utility that's by clicking with the right mouse button
on the disk icon, and chosing OPEN "CalDigit AFRICA 6TB"... (see picture 1)
But... after that, it open a Finder window showing all my internal and external drives, but that drive's
name is in washed grey, like if it was unmounted (see picture 2).
When selected, I can see everything and work normally on the harddrive, even opening FCPROX projects or Libraries, copying from it and writing documents into it... just normal... (see picture 3)
BUT IT DOES NOT SHOW IN THE DESKTOP...
that's my problem...
I even did a Command+i for Info on the hard drive. (see picture 4)
Can anyone shed some light on this issue?
I would be eternally grateful!
Thanks in advance!!!
Cheers!

How can I use an external hard drive that says it's for pc?

HI,
I just ordered an external hard drive that said it would work with Macs. ON the box, it says for Pc's only. Is there a way to have it work with macbookpro?
Thanks

Does the macbook detect the HD in finder? If it does then you can go to DISK UTILITY and select it on the left panel side of DISK utility and go to ERASE. Select Exfat or Fat 32 format if you need to go in between MAC OSX and Windows 7. (Exfat is not supported on all machines running XP) Click the erase when you have the correct format and it should work.
If you can't detect the HD on your mac then you need to format it on a Windows machine to FAT 32 then you should be able to read it.
Your still using leopard? do you happen to have a PPC?

How do I access an external hard drive that is plugged into an AirPort Extreme

I have an external hard drive connected to my AirPort Extreme and I wanted to know how to access the photos and videos on it while using an iPhone or iPad while connected to the network. When I go to the airport utility app on my phone or iPad I can see the drive listed under file sharing and disks so I know it's connected. Any help would be greatly appreciated. Thanks

You will need an App like Filebrowser to do what you want. More details here:
Stratospherix - FileBrowser - Overview

How do i install snow leopard on a internal hard drive that was formatted for windows 7 in a i mac with out taking hard drive out im stuck on apple screen with start up disk in drive

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
      logo appears.
5. Wait for installer to finish loading.

How can I convince my external hard drive that it is no longer too full?

I have tried the various suggestions listed for similar problems, but i keep getting the message that the backup failed. I deleted old backups, and now I see only 2 backups, but it still reads only 36 gb available, 'needs140 gb for backup'. I don't understand a great deal about the process, but I have also followed the directions to use Disk Utility and have verirfied and repaired with no success. I have disconnected and reconnected the hard drive.
Simple instructions will be most helpful, as I am an entry-level fixer ;-)
Thanks...

Check Pondini's troubleshooting page for a solution http://pondini.org/TM/Troubleshooting.html

How to open C645 to view hard drive that was installed

Similar Messages

Maybe you are looking for