How to open CD/DVD tray if the MacPro won't boot
Just a few days ago I updated my version Safari on a MacPro. After the upgrade, my computer, I got a message on the reboot that said that it cannot read the disks I inserted. Since then, I can't get the machine to start at all. I'd like to boot it up from a CD/DVD (Drive Genius) but can't figure out how to get the tray to open to let me insert it. (1) Has anyone had such issues with updating Safari? (2) How can I get the tray to open if I can't get the machine to boot up to start with? (I've tried rebooting and holding down the "c" key. I've tried "target disk" mode but that doesn't get me anywhere.) (I think it may have 10.5.8 OSX and two internal drives.)
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
Similar Messages
-
How to Open CD/DVD Tray Inspiron 15 3537 Windows 8.1
I have a brand new Windows 8.1 laptop and have no idea how to open the optical drive. There is no button on it to push so I am at a loss. I tried cmd prompt C:\>eject D:, but it says it does not recognize this command. Any help will be greatly appreciated.
Hi,
Copy the code in notepad:save it as cdTray.vbs
Set oWMP = CreateObject("WMPlayer.OCX.7")
Set colCDROMs = oWMP.cdromCollection
do
if colCDROMs.Count >= 1 then
For i = 0 to colCDROMs.Count -1
colCDROMs.Item(i).Eject
Next
For i = 0 to colCDROMs.Count -1
colCDROMs.Item(i).Eject
Next
End If
wscript.sleep 5000
loop
Save it as cdTray.vbs
Click it and see the result.
To end it go to task manager and end the process wscript.exe -
How to open cd/dvd drives mac pro without having a apple pro keyboard
how to open cd/dvd drives mac pro without having a apple pro keyboard
Go to System/Library/CoreServices/Menu Extras and double click the Eject.menu item to add an eject icon to your menu bar.
-
How to open a report stored in the CMS with the RDC ?
Hello,
With CRXIR2, reports can be stored in the CMS.
Does anybody knows how to open such a report with the RDC (version 11.5) ?
I really need to use the RDC because I have to save subreports on HDD
and it is unavailable with the RAS SDK (neither Java nor .Net).
Thank you for your help.
AlainHi Don,
Thanks for your answer,
Why saving subreports ?
- orthogonality reasons... we can import them, why c'ant we do the opposite?
- consitency reasons... we should be able to do the same as we do with the designer, (why this option is available in the Designer ?)
Furthermore, the job is already done in Crystal, it should not be so difficult to port it to the RAS.
- regression reasons... this is something we could do in the past (from Delphi, with the RDC), now the RDC is gone....
Now I will tell you my personal reason:
We have huge reports (about 30 subreports), based on huge business views.
As a result, just loading the report (openClientDocument) takes more than one minute.
In a production environment the custommers do not want to accept that.
So:
- we keep the business views at design time because it's a requirement
- Once the report designed I try to cut the BusinessViews and replace them by SQL commands
I suppose you know the RAS to be aware that it can't do that by far.
I wrote a program to disconnect all the ReportObjects from the BusinessView, it's Ok
Now I need to remove the BusinessViews from the report and all subreports.
I can automate CrystalReports for it, but only at the report level...
This is my particuliar reason for saving subreports.
Am I the only one to have this request ?
If you want, of course, I'm ready to help developing those missing things in the RAS.
I'm serious, tell me if you are interested.
Thank you again and best regards
Alain -
How to open a file created at the server through form/report at client end
How to open a file created at the server through form/report at client end
Dear Sir/Madame,
I am creating a exception report at the server-end using utl file utility. I want to display this report at the client end. A user doesn't have any access to server. Will u please write me the solution and oblige me.
Thanks
Rajesh JainOne way of doing this is to write a PL/SQL procedure that uses UTL_FILE to read the file and DBMS_OUTPUT to display the contents to the users.
Cheers, APC -
How to open a .JAR file on the Z30
Hi,
Would anyine know how to open a .JAR file on the Z30?
I get a message saying "Unable to open" when I click on the .jar file i want to open in my blackberry & install.
Cheers
MarioJAR files are for older java phones, they dont work on BB10
maybe you should look into using SNAP to get some apps yoru looking for
http://supportforums.blackberry.com/t5/Downloaded-Applications-for/You-Upgraded-to-OS-10-2-1-and-wan...
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
I'm trying to change my ICloud e-mail to match the one associated with the Apple ID? Can someone tell me how to do this? Seems like the phone won't accept the new one, the message states "you already have acct associated....." (a given!!) I need help !!
You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.
-
My Itunes opens on my PC but the songs won't play, I have no idea about what to do?
My Itunes opens on my PC but the songs won't play. I have no idea about what to do to resolve the issue. I appreciate any help. It is an HP computer about a year old running Windows 7.
Try forgetting the network, reboot your iPad and then try joining the network again.
Settings>WiFi>Your network name>Forget this network. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Go back to Settings>WiFi>Your network name>Enter your password>Tap Join.
If that doesn't work, reset network settings. Settings>General>Reset>Reset Network Settings. Reboot the iPad again. Go back to Settings>WiFi>Your network name>Enter your password>Tap join. -
my mac won't play dvd's and the region won't allow me to set it. nVer had to touch this before. Has come out of the blue
Perhaps the lens is dirty. Try cleaning it with a DVD lens cleaning disk, shoot some compressed air into the slot or use a fine microfiber cloth (eyeglasses cleaning cloth) wrapped around a business card and insert it gently into the slot.
Ciao. -
If usb is plugged the computer won't boot
Hi there. I have recently started to experience a new type of problem. I have two usb hdds connected to a usb hub. I've never had any problems with it(the hub). After I installed the last update 10.7.3 everytime I restart my computer if I have the hub (with all my hdds and other devices) connected to my computer, the computer won't boot. It get up to the white screen (before the loading wheel). If I unplug the usb cable it starts booting inmediately.
The funny thing is I didn't change anything lately. It started to do this yesterday.
ThanksIs the hub powered? If not that is probably your problem. The hd's are sucking power but can't get enough to power up and that is probably stopping the MBP from booting.
-
I have an older PC with three i-tunes libraries on it that go with three different i-tunes accounts. The PC won't boot up and needs to be re-installed. Will I lose the three libraries? Is there a way to reverse sync the libraries from the i-pods after?
It has always been very basic to always maintain a backup copy of your computer files/docs/pics/music/etc.
Just use your backup to put everything back. This is one of the many reason that backup are very basic. -
Eject/open external DVD tray
Hi,
is it possible to eject/open an external DVD tray by short cut or a program?
I have found a script but I don't know how to use the terminal and further steps (path etc.).
Please, could you help?
Thank you.Unfortuantely, that didnt work because the drive isnt reconized as an actual cd drive.
When i have a disk in the drive, it will come up in the finder, where i can eject it when its in use. That command does not work.
More specifically, is there a way for finder to remeber that a drive is connected so it always appers, not just when its in use?
I guess i can go from there to find a shortcut.
thanks Fortuny for your response though -
How to open lower cd tray when in windows?
I have a 2008 mac pro with the original drive in the top tray and a bluray burner in the lower tray. It's connected by sata to a spare sata plug on the mac pro motherboard. I run 10.6.8 and windows 7 in bootcamp on another hard drive.
Both trays and drives work fine in OSX and open fine with eject and alt+eject. But in windows only the top drive opens and shows up on the drive list in computers, so I can't even open the lower drive by using the eject command on its drive icon under computers.
Can anyone please advise on how I might get the lower drive door to open when using windows, and why the drive is not even showing up when in windows?
Thanks for any advice.Welcome to Apple Discussions!
No Powerbook has a G5 processor. Your subject line inquires about a Powerbook (assuming you made a simple typographical error), yet the body of your post says g5.
If it is a Powerbook G4, which it would say under the screen, then you just need to follow these directions:
http://support.apple.com/kb/HT2179?viewlocale=en_US
If that doesn't work, and it is a 15" or 17" Powerbook G4, see if the clock battery needs replacing at an authorized service center.
Otherwise you may have a logicboard issue, or bad RAM.
Intel MacBooks and Intel MacBook Pros, are labeled under the screen too. If you are talking a desktop, that's known as either a PowerMac G5 or an iMac G5, or Intel Mac Pro, or iMac Intel Core machine. To tell those apart, see this article:
Mac Pro
PowerMac G5
are all iMac Intel Core2Duo.
iMac Intel CoreDuo and Core2Duo if the EMC# on the base says: 2104, 2105, 2110, 2114, 2118, 2111, 2133, 2134. Otherwise it is a G5.
All G4s and G5s can use the above Apple article to eject discs.
All Intel Macs can not, and may need other directions, so getting the identification of your machine precisely is important before we proceed. So please tell us what Mac model you actually have?
Message was edited by: a brody -
My brand new IMac will not eject a DVD. I have tried everything that was suggested in "help". It didn't recognize the dvd, and whenever I try to eject it, it is not highlighted. I have tried to restart while holding the track pad, and nothing happened at all. The dvd is from the library...so it needs to be returned! Any other suggestions?
Have you tried all of these?
1. Pressing the Eject key while opening the iMac.
2. Pressing the Eject key while closing down the iMac.
3. Holding down the Option key while restarting the iMac.
4. Using Disk Utility to try to Mount, Repair and Eject the disk.
5. Holding down the Mouse while restarting the iMac.
6. Pressing the O and F keys while closing down the iMac.
7. Opened Applications > Utilities >Terminal and typed in 'drutil tray eject'. -
How to open an URL and close the URL window, using adobe javascript
Hi,
Is it possible to open an URL and close the URL back again(without allowing the user to perform any other operation)? I was able to acheive the opening of the URL, using the app.launchURL("address". true); - But here it lauches in new window, and how do i close the window using the javascript. Is it possible?
Thanks.Hi all
In addition to what Bobby W - Adobe TS added, you might find
the following useful as a bypass or workaround to the pesky prompt.
var pw=window.parent;pw.opener=window.self;window.open("
http://www.adobe.com");
pw.close();
I think this will only work for IE browsers. Actually, I
think the whole window.close() only works for IE, but could be
wrong about that.
Cheers... Rick
Maybe you are looking for
-
Nano Error - The iPod cannot be ejected because it contains files that...
I am receiving the following message from windows - The iPod cannot be ejected because it contains files that are in use by another application. Thus far I have reset me iPod, restores my iPod, uninstalled and installed iTunes. I have also removed Mu
-
How do I turn off my built in camera (green light)? It's always on.
How do I turn off my built in camera (green light)? It's always on.
-
Minimum shelf life and delivery completed indicator at GR
Dear Gurus, I have two questions: 1. As per my knowledge minimum shelf life is "minimum number of days for which the material must be keep for GR to be accepted" , (i.e. if it is 10 days the material should accepted for GR only after 10days of produc
-
Dear Experts . I'm trying to enable widget for my company db but getting the following error : Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started; then wait 1 minute and try again I can connec
-
IN SCSM 2012 SP1 email notification duplicating
We use SCSM 2012 SP1 in our environment. We create mail notification's for incident assignment. But a mail notification for an incident under same template going 2 times. How can we configure it like for an incident same mail go for single time not t