How to open computer hp 2000 to fix loose usb port connector?

how to open computer hp 2000 to fix loose usb port connector?

Here is the Manual:
Manual
The usb ports on the right, next to the power jack, are on a daughterboard and fairly easily replaceable but the left usb port next to the HDMI is on the motherboard. The only way to repair it is to resolder it to the motherboard. Good luck. 
If this is "the Answer" please click "Accept as Solution" to help others find it. 

Similar Messages

  • My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?

    My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?  A message from windows says: the device has malfunctioned.

    Try TS1363: iPod: Appears in Windows but not in iTunes.
    See also Corrupt iPod classic.
    tt2

  • How do you unplug the iPhone from the Mac USB port safely?

    How do you unplug the iphone from the Mac USB port safely?

    Click on the little up arrow next to the name of your iPhone to eject the iPhone first.  Then just pull out the USB plug, grasping it by the plastic end of the plug, not the cable.

  • I connected my iPhone 5 to my pc. However, my phone kept vibrating and prompting 'Trust this Computer'' . I changed cables and USB port. My pc is newly bought.

    I connected my iPhone 5 to my pc. However, my phone kept vibrating and prompting 'Trust this Computer'' . I changed cables and USB port. My pc is newly bought.

    If you trust this computer, tap "Trust This Computer."

  • How do I traspass my photos from my mac pro computer to a new ipad without usb port?, how do I traspass my photos from my mac pro computer to a new ipad without usb port?

    I have a Macpro computer and I want to know how to traspass photos or files to a new ipad model since it has no USB port.
    Thans for your help!

    You can transfer photos or documents to your iPad using iTunes. Connect your iPad to your computer using the cable that came with your iPad and sync it with your computer to copy your photos to it.
    With documents, you can use iCloud if you have Pages in your iPad. Go to iCloud > iWork and drag your documents in that page

  • How can I find/fix bad USB Port on MBP 2012 ivy 15' WITH SUPERDRIVE

    I have a 2012 15' ivy bridge macbook pro with the super drive. I am a DJ and I get terrible static and other audio problems when the mixer/soundcard is connected to one of the USB ports, how can I determine which one it is and how can I fix it?

    You'll just have to test your USB ports and see if you have a 'good' one - if not, take your machine and your equipment into your local Apple Store and let them 'hear' the problems with the USB port(s). There have been a number of posts here with problems using the USB 3.0 ports with various devices - usually USB 3.0 devices. Since the release of Mountain Lion, I've not read of many USB problems, though, with the 2012 machines. There have been some other problems reported with ML (not enough time on battery seems to be the main glitch but it's a problem that is not tied to certain models - just seems hit and miss).
    You might want to try the ML upgrade and see if that fixes the problems - if not, it's time for a trip to the Apple Store.
    Clinton

  • How can i fix my USB ports & Bluetooth

    how can i fix my bluetooth & USB Ports On Mac Book Pro mid - 2012 they were working yesterday now aren't working now !!!!!!!!!!!

    If I were in your shoes, I would Google "usb drives converted to write protected".  

  • Connecting an hp laserjet 2000 to windows 8 usb port

    Hi, and thanks in advance to any and all who can answer my question.
    I am in the process of upgrading to an new Windows 8 desktop PC that only has USB ports.  I have an HP Laserjet 4000 printer that has a large parallel printer port that currently connects with a parallel printer cable to my existing Windows XP (upgraded to 7 PC.)  According to all the info I can find the printer should be compatable with windows 8 but I cannot find out what kind of a connection cable I need.  Will a simple Parallel to USB cable work or do I need something specific to the HP Laserjet 4000?
    Thanks again for any help.

    Hello,
    I have connected those printers to my Macs with OS X using a USB to Parallel printer cable (like the one you propose). It worked just fine.
    I did have to download and install the Gimp-Print printer drivers and set those up (since the 4si doesn't have any Mac drivers). So, you may need to get the free Gimp-Print package installed as well.
    But, yes, the USB to Parallel cable is all you need for making the connection. The cable does not require any drivers. Just plug it in, and connect the printer to the computer. Then, set-out configuring the printer drivers to talk with your printer.
    You can get the Gimp-Print package at:
    http://gimp-print.sourceforge.net/MacOSX.php3
    I hope this helps.
    Let us know if you have other questions.
    P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

  • HT201257 How can I run the hardware test when my USB ports and bluetooth doesn't work?

    The USB ports and the Bluetooth suddenly will not work on my Mac Mini (2008). There is very little I can do except using Remote Desktop. To run the Hardware Test, the D key has to be pressed during startup. I got no key to press. Is there any other way to do this?

    Sorry, focused on bluetooth issue. If USB and bluetooth are knackered, try an SMC reset:
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.

  • My computer freezes when plugging into my usb port

    I just got and ipod shuffle when i plug it into my usb port a few seconds later my computer freezes and i have to restart

    Try a different USB port. I had that issue with my shuffle once and using another USB port resolved it. Here is a great iPod Shuffle Support page. Keep it handy for anytime there is an issue or question regarding your shuffle. It's very thorough. http://www.apple.com/support/ipodshuffle/
    Good Luck,
    Rachyl

  • How do I fix a loose USB port?

    Can users fix these on our own? Or do we just make a Genius Bar appointment?

    You will have to make an appointment to take it in, if the computer is covered by AppleCare or the original 1 year warranty this should be covered.

  • Nano isn't recognized by computer and won't charge via USB port

    Hi,
    I'm having a problem with a couple of my Nanos and I can't figure out/find a remedy for it. The Nanos aren't recognized by the computer, nor do they charge when I plug them into the computer with the USB cable. They do charge when I use a FireWire cable, but the computer still doesn't recognize them. They do turn on when I connect the USB to them, so something is "connecting". Is this a hardware issue? Many people have had success with resetting the iPod, but I've had no luck with that. Thanks for any help.

    im in the same boat as you man, i got mine from a friend at school, and after a month of having it, my computer wont recognize it anymore. it palys jsut fine, noting malfunctions, it will even charge( with some protest...), but itunes nor the computer even knows its there...
    ive hunted dozons znd dozons of help forums and still cant find a solution that works.
    should i jsut give up the ghost and get a new one...?
    id really hate to think that all this effort is wasted and that apple cant offer us a simple solution of somesort atleast.
    and the 5r's is BS and does nothing everytime i try it.
    Does Anyone have ANYTHING usful to offer us?!
    im crossing my fingers...

  • My ipod touch 4 won't sync or register on my computer. The cord works, the usb port works, and when I plug my ipod into the wall to charge it work, but when i plug it to the computer nothing, not even charging. P.S. worked before I updated it.

    The cord works, theusb port works, and when I plug my ipod into the wall charger it works, but when I plug it into the computer, nothing, not even charging. P.S. it worked before I updated it to iOS  6.1.5

    You do have iTunes 10.7 or later on the computer, right?
    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • How to communicate b/w PC and microcontroller through USB ports

    Hi All
    I am Using LV8.0 FDS and VISA 3.1
    I am trying to communicate my PC with ATMEL microcontroller( just writing and reading string commands) similar to serial communication. For that i need to develop a USB driver in LV.
    As i am new to USB communication , i have gone through the USB instrument control tutorial. i had few questions from it.
    How to know the class of the USb device(ATMEL microcontroller)?
    Any h/w or s/ w needed to be installed to perform usb communcation(i have already installed the drivers CD that come with FDS)?
    When to use USBRaw Bulk mode and When to use USBRaw Control mode?
    When to use VISA write/read vi's and when to use USB control in/out vi's?
    Also how to detect whether it is a USBTMC device or USB Raw device?
    I am trying hard with these questions. but i didn't get the solution.
    So plz suggest me with solutions .and attach examples if any which may clarify my doubts

    There are several great resources in our KnowledgeBase and Developer Zone that discuss USB RAW control with LabVIEW.  These address many of your questions.
    KnowledgeBase: How Can I Communicate With a Device Using NI-VISA USB RAW Mode?
    Developer Zone: USB RAW Control Communication in LabVIEW
    Take a look at those documents, and the related links in both of them--that should help you get started.
    Chad B. » National Instruments » ni.com

  • Extreme USB disk is not shown in airport utility, disk/partitions. USB disk woks on PC (NTFS). How to get it to work in Airport Extreme USB port?

    USB disk is woking on PC (NTFS). How can I get it to work with Airport Extreme?

    Hi,
    I have a Minimac 2.4 GHz Intel Core 2 Duo with OS X 10.8.4.
    Using an Apple Time Capsule for backup.
    In disc time capsule stored other files I mada a bit of time I can not find them, what can I do?

Maybe you are looking for