How to open CS5 project in CS3

Hi All,
How can I open CS5 project in CS3?
Thanks
Shaul

In theory you can't.
Premiere is not downwards compatible.
Some have opened CS4 in CS3 or CS5 in CS4 with non or basis effects.
But you can always give it a try, make sure you have a backup

Similar Messages

  • Trying to open project. FCP says the project ( that previously opened fine) is unreadable. Any suggestions as to how to open the project?

    Can not open a project on FCP which was previously able to be opened ( just an hour ago)..says project is "unreadable" - any suggestions as to how to open this project?

    That's fine! (Even if troubled...)
    No, I know nothing of Magic Bullet...But they do:
    http://forums.creativecow.net/cgi-bin/newreadpost.cgi?forumid=138&postid=855316
    http://www.kenstone.net/fcphomepage/review_magic_bullet_editorssaraceno.html
    and finally:
    http://www.redgiantsoftware.com/
    Hope these help!

  • Opening CS5 projects in CS4?

    Im still using AE CS4 and I'm trying to work on a project with someone using CS5, but I'm unable to open his .aep. Is there a way for him to save his CS5 project so that it can CS4 can open it?

    Sorry, there is not a way.  AE has never been able to do it officially.  There were hacks that worked sometimes in earlier versions, but not between AE 9 & AE 10.  AE 9 is 32-bit, and AE 10 is 64-bit, a very fundamental difference.
    You would need your buddy to replicate his AE 10 work in AE 9, or you could import rendered files from your buddy.  But that's it.
    How 'bout AE 10 & AE 10.5?  You can backsave from 10.5 to 10 as long as the project contains none of 10.5's new features like Warp Stabilizer.

  • CS5 not opening CS5 project!!

    I am having this same problem in a FULL install of CS5. I am on a Mac, using all MOV footage encoded with CineForm NeoScene (and yes, I have the most recent versions of the codecs installed for everything). I have one sequence that is dynamic linked from After Effects, and it has given me no trouble so far. The project was started in CS5 about a week ago, and I have worked on it several times since. I have closed, opened, edited and exported it without trouble. Until today.
    Now I am getting the dreaded "This project contained a sequece that could not be opened. No sequence preview preset file or codec could be associated with this sequence type" error. Never mind how unnerving it is that the error uses the past-tense, making it sound like all hope is lost.
    I similarly get returned to the "Welcome" pane offering me new or recent projects to open (I should probably disable that), and the project I am trying to open never comes up. It won't open at all, so I can't check the sequence settings to see what's going on. As I mentioned, it all opened and worked fine two days ago, and as far as I know nothing has changed in my system since then.
    This is a big problem, since I need to make edits to this project, and I am hoping not to have to start it again from the ground up.
    Does my lack of ability to open the project at all indicate a bigger problem? Could it have something to do with Dynamic Link (it doesn't matter if I have that lnked file open in AE, I still can't open the Premiere project). I have restarted and tried opening it fresh, no luck.
    Can anyone give me some quick guidance with this? Thank you!
    Matt

    Yep, turned out it was the dreaded Trial-reversion bug on an update. I uninstalled, cleaned, and reinstalled then updated from Bridge, and everything seems to be working well.
    I did have some distinct playback problems at first, but I dug in and found that nVidia had updated drivers for their Mac cards and for the CUDA cores. Installing those cleared everything up and I am now running better than I was before! Thanks everyone.
    Matt

  • How to open my project library progress in timeline with FCPX 10.1?

    So I've been having a huge problem with FCPX 10.1 and I cannot, for the life of me, figure out even what I'm supposed to ask--much less what the answer is.
    So here's the basic problem. I don't know how to open my complete progress of a project library in the timeline. I have 5 projects, and two of them, for some reason unbeknownst to me, I just double click to bring up in the timeline. The other three, however, won't. Let me clarify more. One of the projects is not even showing up in the new 'Projects' sub-menu when selecting my library. The other two are showing up in the 'Projects' sub-menu, but aren't showing as having any content. Their time shows as 0:00. Now for one of the projects I mentioned before (the one that isn't even showing up in the 'Projects' sub-menu,) I know that its editing was saved because I worked on it several different times (having closed and opened FCPx in between) However when I was working on that video, I never removed it from my timeline. So whenever I opened FCPx, my progress it would just automatically pop up in the timeline.
    My problem is this: I do not know where to reliably find my progress for my various project libraries and to open them in the timeline every single time.
    If you need anymore information from me, please say so. My problem is very simply complex, because I'm just stupid enough with this software to not understand how to ask my question properly.
    I worked on a specific project 3 weeks ago and I can't find the progress for it anywhere. I don't want to open specific clips in the timeline. During that project session, I had put all of my clips in the timeline and was editing them in specific ways that required them all being on the timeline so I could get a very specific and seamless effect. How do I get all of that progress into the timeline?

    Okay so if I go into the sub-menu that pops up that contains all of my video and audio clips and right click the FIRST clip in my entire progress and load that into timeline, all of my progress is loaded as well--why is this the case? And why does the project itself show as having 00:00:00 progress in it?

  • Help.....How to Open a Project in WSAD..............

    Hi Everybody,
    I am new to WSAD 4...
    I created a J2EE project.
    My program is located in
    C:\Program Files\IBM\Application Developer\workspace
    Can someone Please tell me how can i open this project in WSAD.
    I searched in help, but no help there..
    I would appreciate if someone who used WSAD and tell me in simple steps how to open i would greatly appreciate.
    regars,
    kemsho.

    Windows -> WorkBench

  • AE CS6 crashes while trying to open CS5 project

    First issue that comes upon opening a particular CS5 project into CS6 is that DE_FreeForm plug-in is notified as missing. Ok. Then tries to load a comp and crashes. Project opens fine in CS5. I removed DE_FreeFormAE, will not open in CS6. Help please.
    Here are my specs:
    Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.4 GHz, 12 GB, SMC 1.39f11
    Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
    Memory Module: global_name
    Process:    
    After Effects [1058]
    Path:       
    /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app/Contents/MacOS/After Effects
    Identifier: 
    com.adobe.AfterEffects
    Version:    
    11.0.1 (11.0)
    Code Type:  
    X86-64 (Native)
    Parent Process:  launchd [153]
    Date/Time:  
    2012-09-25 18:59:20.766 -0700
    OS Version: 
    Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:     
    279499 sec
    Crashes Since Last Report:      
    11
    Per-App Interval Since Last Report:  141638 sec
    Per-App Crashes Since Last Report:   9
    Anonymous UUID:                 
    15A04D26-B40E-4836-9CA1-3C42501EC860
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x00007fff5f3fffa8
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   PIN.dylib                
    0x0000000101d38162 bool PSL_AE_Interface::TestSetImageTime<PIN_PSLExpensiveObjectCache>(PIN_PSLExpensiveObjectCac he*, AdobePSL::PSLTime const&, PIN_SeqSpec**) + 34914

    From WHERE did you remove the plugin?  From the footage in question in the CS5 project file?  Or somewhere else?

  • Opening CS2 Project in CS3

    When I try and open a project I started in CS2 and open it in CS3 it opens the project fine, but my Video and Audio tracks are gone and there is no way to add the Video and Audio tracks. Is there something I am doing wrong to make this work?
    Thanks

    What
    troubleshooting have you done?
    Cheers
    Eddie
    Forum FAQ
    Premiere Pro Wiki
    - Over 250 frequently answered questions
    - Over 100 free tutorials
    - Maintained by editors like
    you

  • Can't figure out how to open multiple projects in imovie

    I want to copy clips from one project into another. I've read you simply open the two projects and drag clips from one to the other. I may be missing something quite basic, but I cannot figure out how to get two projects open at once. If I open from the project list, I can only choose one. What am I missing????

    Open the project that you want to take video from, select the frames that you want to include in your other project, and Edit > Copy (or Command-C). Return to your Projects list, select the project you want to add the frames to, move the playhead to the point where you want the frames to be inserted, and Edit > Paste (Command-V).

  • How to open the project?

    how to open a src folder to a new project in jbuilder6?
    thanks in advanced

    in jbuilder there is a section about the source
    (something about default & test) but i guess im doing
    something wrong because its not working....
    does anyone can explain to me how to do that (in
    jbuilder or even j++)??Is reading the manual or help files too difficult?

  • Opening CS5 project in CC2014 - Timecode is different on spanned clips

    Hi All. I am having issues opening the CS5 project in CC2014 (latest update).
    Here's the story -
    I was editing a documentary project on an old Mac Pro and needed to upgrade (speed and storage wise). So I am now working on a thunderbolt 2 lacie drive and MacBook Pro (Retina, 15-inch, Mid 2014) 2.5 GHz Intel Core i7, 16gig, SSD 512. This was just a month ago. So i loaded CC. The CS5 project opens fine and fast in the new CC2014 software on the new macbook, however I have discovered that many of the clips are wrong, same tracks just different timecode.
    Below are two identical timelines... The first is CC2014 and the lighter grey is CS5. The CS5 image is correct and the CC2014 is incorrect. The footage on both sequences is from the same tape number, but for some reason the time code is being read differently. The 803 clip is almost 10 minutes different in CC2014.
    Now both projects are identical. The only difference is that CC2014 converts the CS5 clip into a CC2014 project.
    Would appreciate any help and advice. I know it's not wise to change software during a project, but I didn't realise this would happen as it seems to be a fundamental change in the way the software reads the media, and I'm unsure what's new in CC2014 to make such a major problem occur.
    Thanks
    Scott

    An Update.
    I exported an EDL out of CS5 and then brought the EDL into CC2014. I relinked the media in question and it works fine. The EDL however is not ideal for what I am doing here, as the relinking in CC2014 is not working properly either.
    S

  • Open CS5 Document in CS3

    Help. There appears, from my limited knowledge, that there is no way to get a CS5 document into CS3 (without CS4).
    This is very bad. I have CS5 documents from customers and I can no longer open the files. CS3 does not know about .idml files and CS5 doesn't know about .inx files.
    Please tell me Adobe is fixing this! This is a huge mistake on Adobe's part just assuming that everybody upgrades to every new version. We do not have CS4 and don't have access to it.
    Please tell me Adobe is going to allow CS5 to create .inx files that can be read by CS3.
    Does anyone know anything about making this happen?
    Or, another way to get a CS5 document into CS3?
    Thanks,
    David Whitmyre

    Thaks for the perspective, Bob.
    I don't think Adobe is evil, as some certainly do.
    I think their prices are high, but hey, they make great products (my opinion). Your point about the cost per day does put things in perspective when looked at that way, but I know many who have held off, being that business has not been so good. For myself, I have upgraded every product I have used at just about every version (skipped a few). I started this "back in the day" using Pagemaker 1 on Windows ver. 2 (yea, some people have no idea that even existed!), Corel Draw ver 1, Photoshop Ver 2, Illustrator, Ventura Publisher (Xerox) ver 1, FrameMaker (when it still belonged to Frame). Fractal Design Painter, Flash, Dreamweaver, blah, blah, blah. Pretty much, you name, I've used it and upgraded it until it died. I've spent thousands upon thousands of dollars on software. However, as you make your point, the payback, if your are in business to make money, is far greater. I have made 100-fold back from what I have put into the purchase and upgrade of the software I use.
    I also know it it is no easy task to fix or even add new things into software. I have worked for several software companies over the years. Believe me, I know. I do also know that just about every product I have used has had the ability to downgrade a file back several versions at least. Adobe has to know that there are lots of people out there using CS3 for real-world work. And, unless they live on an island, it is likely they will be working with people who have CS5. Just sayin', seems a little too close to cut it off, even if it is because of features. Make some sort of downgrade ability.
    Just my perspective.
    Thanks,
    David

  • How to open a project FCP 7 in FCP 4.5?

    I can't open a project (i've made in fcp 7) in fcp 4.5. I've tried to make an XML-document (all five available options), but it doesn't work.
    Anyone an idea?
    Thanks!

    Welcome to the forum!
    If memory serves me correct it should be XML version 1. Did you highlight what you want to export in the Browser and choose File>Export>XML?
    You are trying to open with FCP 4.5 not FCP 4 correct?
    What do you need to go to 4.5 for? If you are working in a codec that isn't supported by FCP 4.5 then you will have an issue. What codec are you working with?

  • How to open a project

    I just downloaded Java Wireless Toolkit 2.5.1 CLDC, and everything went alright except, I can not open a project. I tried by clicking the 'open project' icon and by selecting the open project from the file menu.
    Am I missing something or do I have to install anything else ?
    bytheway, i'm using Java version: 1.5.0_02
    thanks in advance
    The Justin

    I am also having problems. I click on both the toolbar "open project" buttons and file->open project and nothing happens at all. I've installed the kit directly under the C drive (so no spaces in the path), and I've done this on both my laptop and desktop. I've already created the project and compiled/ran it fine. I then can't create the project again because I get a "project already named blah" error. This is getting annoying... Any suggestions?
    Message was edited by:
    kirami

  • How to open two projects in the same time?

    I have over 40 file project. Stadium.
    I am in finish of my work, but I forgot about something. I didn't notice that I lost a few keyfreme animation. I didn't realize that in 30 project and I am more over 40 right now. I made a lot of work and I can't go back to 30 project. I don't want to do this from the beginning, so I would like to COPY my keyfremes from project 3o to project 40. To do that I need to have 2 programs opens (to copy keyfremes from 30 project to 40 project). But I can't open two After Effects.
    How Can I copy my keyframes on timeline?
    To copy ALL of this in one turn and paste also:

    By FILE - IMPORT - FILE? It's just simple?
    Thank you!

Maybe you are looking for