How to open free-synth daHornet in Logic Pro

I have just downloaded the freesynth daHornet and would like to use in Logic Pro.
I have copied the .compnent file into library/adio/plug-ins/components.
I have tried to open daHornet through the 'inserts' portal of Logic, but daHornet does not register.
When I click on the .component file, it takes me to Garageband, where I can open the synth, but as I don't use Garageband, so this is no use to me.
(I believe that once the synth opens for the 1st time in Logic, you need to key in a serial number, but I have not got this far yet.)
Any suggestions on how to open daHornet in Logic would be greatly appreciated.
Kind Regards.

That is interesting to hear that daHornet opens in 10.4.8 but not 10.4.9.
It sounds like if I 'force load' daHornet in AU Manager, the only issue I may encounter is instability (-would this mean the possibility of daHornet crashing occasionally?)
If so, it sounds like it is worth a try!
More than likely, it will work just fine. The only annoying thing is every time you launch Logic, you'll get a prompt saying that there are incompatible plug-ins in use. You'll have to check "O.K" (or something like that), and then things work as normal.
If you do discover Logic behaving erratically, or unexplained crashes, at least you'll know the likely source.
But that fact that it passes the AU validation in 10.4.8, and not 10.4.9, tells me you won't likely have any performance issues, just that annoying prompt when Logic starts.

Similar Messages

  • How do i connect my MIDI to Logic Pro?

    How do i connect my MIDI to Logic Pro?

    You can always open audio/midi setup to troubleshoot midi or audio interface problems.
    Go to applications -> Utilities -> Audio Midi Setup.
    Then you may have to go to Window -> Show Midi Window.
    You can test your setup and add or remove devices.

  • How to open adobe reader file in adobe pro xl?

    how to open adobe reader file in adobe pro xl?Downloading, Installing, Setting Up

    Moving this discussion to the Acrobat Installation & Update Issues forum.

  • How do you export a song in logic pro x. ive tried now for 2 hours to do it and all it gives me and indivial files when i want the whole thing as a project

    how do you export a song in logic pro x. ive tried now for 2 hours to do it and all it gives me and indivial files when i want the whole thing as a project

    Go here:
    http://help.apple.com/logicpro/mac/10/
    Search on   Bounce

  • How do you delete a device in Logic Pro X Control Surfaces Setup?

    How do you delete a device in Logic Pro X > Control Surfaces > Setup?

    Go here:
    http://help.apple.com/logicpro/mac/10/
    Search on   Bounce

  • How long does it takes to install Logic Pro x

    Can anyone tell me how long does it takes to install Logic Pro x?

    You need to drop the Logic Pro x icon into applications, this will then install onto the machine, once installed click on Logic Pro X icon, application will start to download in a matter of minutes, the blue bar will be visible showing the download progress.
    When the application is fully installed you can then download all the additional instruments if required.
    HAVE FUN

  • How to open Facebook in china using MacBook Pro?

    hello, please to resolve on how to open facebook in China using MacBook Pro.
    Many thanks to all!

    You can't. Want more GPU? You'll have to purchase a new computer.

  • How do I download software such as Logic Pro 9 on my new MacBook Pro with Retina? It has no disc drive

    How do I download software such as Logic Pro 9 on my new MacBook Pro with Retina? It has no disc drive

    It's available in the App Store as a digital download. You do not need a disc to install software.

  • How to record a drum track on logic pro

    how to record a drum track on logic pro

    • What midi interface is it? Do you have a current driver? If everything is alright, GB should say (in the Prefs) "1 midi device detected".
    • Do you have the midi cables connected the right way? Connect the drum machine's midi out with the interface's midi in.

  • How to open a "wav" file in Logic 7.2.1 and then remaster?

    A fellow musician wants to see if I can improve audio tracks his band recorded in Cubase SX. He has a CD with the WAV files of each of 12 audio tracks. First question - Could someone tell me how to open his files and then import them into Logic Pro so that his tracks 1-12 correspond to my audio tracks 1-12 and be in sync?
    Second question - assuming I can get his tracks going what are the key ways to boost volume or "master" his tracks so that the end result, a stereo mix, is loud vibrant and "radio ready"?
    I'm familiar with the mastering plug ins on the output channels of Logic. I've used "Soft Maximizer" but it seems to be compression related. Are these "rooms", available on the output channels, the only way to increase volume and aliveness?
    He's doing this because the studio he's at can't seem to make a mix that he's happy with. He says the mixes lack volume and vibrancy. Thanks in advance.

    Use the Audio Editor window to import the tracks. Then drag them one at a time onto Audio tracks in the Arrange window so they all align to Bar 1 1 1 1.
    The fun will start if they were not recorded simultaneously as you will need to align them manually to be in sync. Good luck with that it takes time but is not impossible. Use the moveable start point in the Audio Editor to adjust the start of each wav file until they are aligned.
    To improve the levels, probably the quickest way is to Normalize each track first in the Audio Editor window before you start mixing and EQ'ing them in Arrange.
    Rik

  • Can I open Remix Tools 2 in Logic Pro's Loop Browser?

    I have no problem opening up GarageBand's Jam Pack Remix Tools 2, but can only figure it out through "Import Audio File" and it's in the form of one extremely long list of files.
    Is there anyway to open up this Remix Tools 2 in the same fashion of opening up "Jam Pack Management" that came with Logic Pro when I bought it? That looks a lot more organized and I'd rather click on "beats" or "bass" versus scrolling down the listen of Remix Tools 2 in alphabetical order trying to find each "beat" or "bass" contained in every file.
    I'd like to open this up Remix Tools 2 through "Audio" -> "Loop Browser" but don't understand the means to get it there or if it is possible even. Any help would be grateful.

    Wait, so how do I delete this thread? My question was answered in a previous thread (although from when I read it I didn't understand what it meant at the time).

  • How to play movie in sync in Logic Pro X 10.0.6 from FCPX 10.1.1

    Hi Guys
    New to Logic Pro X (although I've used Soundtrack Pro a lot in the past). I export XML from FCPX, and then I import the FCPX XML into Logic Pro X. However, the 'movie' to time my sound effects and queue music to etc is mostly frozen. How can I get the movie from FCPX into Logic Pro X in sync, so I can refer to it as a queue for bringing in music etc?
    After importing the FCPX XML the 'open movie' (I opened a default master file that I'd shared/exported from FCPX) the movie that played in the popup was slightly out of sync.
    Warm regards

    Hi Guys
    New to Logic Pro X (although I've used Soundtrack Pro a lot in the past). I export XML from FCPX, and then I import the FCPX XML into Logic Pro X. However, the 'movie' to time my sound effects and queue music to etc is mostly frozen. How can I get the movie from FCPX into Logic Pro X in sync, so I can refer to it as a queue for bringing in music etc?
    After importing the FCPX XML the 'open movie' (I opened a default master file that I'd shared/exported from FCPX) the movie that played in the popup was slightly out of sync.
    Warm regards

  • Free video tutorials for logic pro 8?

    I recently purchased logic studio.I remember reading somewhere on the apple website that there were free video tutorials available for logic studio from the apple website.But I cant seem to find them anywhere.Does anyone know about this or how to access them.Thanks.

    Hi Kilmar. Don't know about the apple site, but as others have replied macprovideo.com have an excellent range. There are free downloadedable examples and some to watch on their site. The tutorials that come with V8 are only song files; not actual tutorials. I was looking for them too! There are also a couple of books from Apple pro training. Logic Pro 8 and Logic express 8 by David Nahmani. Also Logic Pro 8 Beyond the basics by David Dvorin. Both come with a DVD with 30 day version of expres and work files to go with the various topics described. I've got the Version 7 books and they are excellent. Version 8 won't be published until end of OCt and 1st week Nov in the US. In Australia, where I live, not until Feb 2008. {boring!] but they are available from US publishers. Let me know if you want more info. Hope this helps. Scorpii.

  • How to transfer all the data from Logic pro to other drive (faster)?

    Hi
    I am trying to upgrade the performance of my Mac and decided to upgrade the RAM and to use a dedicated HardDrive for Logic Pro using firewire (i have a mac mini server...). Think the Processor e fast enough...
    How can i transfer all the information for that drive?
    Can i move the media library from the OS drive to the new drive? or has it to stay were initially instaled?
    I moved to Mac because my Windows "Super 16GB QuadCore PC" was giviing me trouble...in relation to connections, critical errors...
    I am a novice on the Mac "ways"...
    Can someone give me directions?

    Logic doesn't store the majority of its data in designated library places, so you can put your session files and audio files wherever you want. If you move the location of something, say an audio file, and logic doesn't know where to find that asset, then it'll present you with a dialog box which asks you if you can tell it where you moved it to, or if you'd like it to go off and search for files of that name for you. They're all just files on a hard disk. There's only a few things which have to be stored in particular places, such as preferences or sampler instruments. Anything that isn't part of the program, you can store it wherever you want. In a session you can have for example all the live parts on one hard disk, and then all your samples on another hard disk. It's all arbitrary and can be defined by you.
    So yes, you can generally keep your media library wherever you want (as far as Logic is concerned).

  • How to search for new AU in Logic Pro X?

    So I recently bought Nexus 2 so I can use it in Logic Pro X, and I made sure Nexus 2 is a 64bit plug in.  For some reason I can't seem to find it in my AU plug ins when I open up Logic Pro X, but I can find it in Logic Pro 9.  Can somebody help?

    Does it appear in the AU manager?  If you've not checked in there, would be well worth a look.

Maybe you are looking for

  • Calendar won't print lines on it ( to make it look like a calendar)

    i had windows xp and everything worked great. now with vista everything works and hot syncs fine but printing the calendar is just a blank piece of paper with the dates and events on it... i have to draw in lines to block of the days.. this is drivin

  • Any way to present standard text in response to a Lync message sent to a distribution group?

    Our company uses MOC/Lync as a way for employees to engage the Tier 1 Help Desk with questions.  The Tier 1 Help Desk is setup as a distribution list and employees send a MOC message to that distribution list.  When there is a broad system issue, the

  • MacBook Pro DVD Region Settings...

    Hi I have a new MacBook Pro and use the DVD drive quite frequently with different regions. Is there a way to make it so you can have all regions working at once with no limitations? It is so frustrating that there is only 5 times you can change it. I

  • AQ/JMS

    I am able to publish to a recipient list on multi-consumer topic using JMS. But I am unable to create a subscriber and receive the message. I am able to connect, create session, get the topic, obtain a Topic Receiver successfully. But when i call rec

  • Desperate for Delay function - Deadline fast approaching...

    I am trying to do what I suspect is easy, and I've searched but not come up with what I need to do. In my project, I have 4 nav buttons in a nav bar. Press on one and it calls a .swf file that animates the actual pressed button photo larger onto the