How to open iMovie project

I created a project then moved the iMovie folder to external hard drive. Now iMovie does not recognize the project. The folder that has the project shows up in gray and unable to open.

Move your project back to the Movies/iMovie Projects folder on your internal drive.
In iMovie 08 it is possible to move Events to an external drive if you do it from within iMovie. However, projects must stay on the internal drive.
If you upgrade to iMovie 09 or 11, projects can also be moved to an external drive, but the move needs to be done in iMovie.

Similar Messages

How to open iMovie 10.0.7?

Hello everybody,
After the upgrade in version 10.0.7, I lost all my movies... how to open iMovie if it crash at the opening?

No bootable clone backup from before the update? OK. I think the following files and folders would need replacing with versions dated before you downloaded iMovie 10.0.7:
Applications/iMovie.app
~/Library/Preferences/com.apple.imovieapp.........plist [deleting the 10.0.7 version sufficient - will be recreated by 10.0.6
~/Library/iMovie
~/Library/Containers/com.apple.imovieApp
I think this covers everything but I can't be certain. Keep copies of the 10.0.7 versions so you can if necessary restore the status quo
Before trying all of the above its probably worth just deleting the current .plist file (with iMovie not running), rebooting, then trying iMovie 10.0.7 again (if you have already tried this).
Failing that I would delete iMovie 10.0.7 and re-install - several people have reported problems with download and its just possible that something went wrong the first time.
If this still doesn't work it may be worth systematically removing event folders from the problem library with the finder (iMovie not running) because there is probably one event that iMovie 10.0.7 'doesn't like'
Geoff.

How to save iMovie project as .mov file?

That's my question!

Dr.E wrote:
How to save iMovie project as .mov file?
That's my question!
Share/Export with Quicktime
That's my answer, and Welcome, Dr.E to the  boards ...

Trying to open project. FCP says the project ( that previously opened fine) is unreadable. Any suggestions as to how to open the project?

Can not open a project on FCP which was previously able to be opened ( just an hour ago)..says project is "unreadable" - any suggestions as to how to open this project?

That's fine! (Even if troubled...)
No, I know nothing of Magic Bullet...But they do:
http://forums.creativecow.net/cgi-bin/newreadpost.cgi?forumid=138&postid=855316
http://www.kenstone.net/fcphomepage/review_magic_bullet_editorssaraceno.html
and finally:
http://www.redgiantsoftware.com/
Hope these help!

Can't figure out how to open multiple projects in imovie

I want to copy clips from one project into another. I've read you simply open the two projects and drag clips from one to the other. I may be missing something quite basic, but I cannot figure out how to get two projects open at once. If I open from the project list, I can only choose one. What am I missing????

Open the project that you want to take video from, select the frames that you want to include in your other project, and Edit > Copy (or Command-C). Return to your Projects list, select the project you want to add the frames to, move the playhead to the point where you want the frames to be inserted, and Edit > Paste (Command-V).

Unable to open iMovie project?

I made a simple iMovie 09 project and burned it to a DVD via iDVD.
Then, to save space on my HD, I moved the project to an external HD.
Now I want to go back to the project to make some edits.   But when took it out of the external HD and placed it on my desktop, I am unable to open it in iMovie.   I've tried simply clicking on the project icon as well as doing File>Import>Movie. I also tried clicking and dragging the movie icon from the desktop to iMovie with no luck. iMovie just doesn't see to want to recognize it.
Can someone help?   Thanks?

Hi
There are so many things to this.
A. Flash drive - I even don't know if they would ever work - very doubtful
B. External hard disks - MUST be Mac OS Extended (hfs) formatted -
UNIX/DOS/FAT32/Mac OS Exchange works for most other things BUT NOT FOR VIDEO no matter if iMovie, iDVD or FinalCut is used.
C. In the folder iMovie Projects - There are NO MOVIES - but text-documents related to the projects and this document points to the Raw material in iMovie Events folder and how it is supposed to be Played/Viewed in this particular project. e.g. play Clip A from 00:00:01:13 to 00:03:45:02 and so on. So there are no movies in the project folder.
D. So if both iMovie Events and iMovie Projects folder are copied over to an external hard disk - Then the iMovie in the second Mac has no links to this and will not find it.
SO to be able to work with one project on two Macs - all moving's of Events and Projects should be done within the iMovie Application - Not on DeskTop/Finder - do not alter or move any folder named
• iMovie Events
• iMovie Projects
on DeskTop/Finder - as they can mess-up and be very hard to impossible to mend.
Yours Bengt W

How to transfer IMovie project from one user to another on MacBok Pro?

My daughter made a movie with IMovie and I would like to add music from my files. We work as separate users and now I cannot open the project with myself as user. How can I access the movie made as another user? Even if I copy the project on my desktop, it does not open in IMovie when I am the user.

Hello to-mii,
Your best option would be to use an external drive to make the project available to other users on the system.
iMovie '11: Copy or move a project to an external hard disk
http://support.apple.com/kb/PH2289
You may also need to transfer the related events to the external drive, as well.
iMovie '11: Copy or move video from your Event Library to an external hard disk
http://support.apple.com/kb/PH2302
Cheers,
Allen

How to move iMovie project from one computer to another

I have been working on an iMovie 09 project on my desktop at home.
Now I want to work on the same project on my computer at work.
How can I move the project from one computer to another? What I've already tried was to make a duplicate copy of the project and then use a thumb drive to move that to another computer. It didn't work.
Thanks for your help.

Hello James Snedeker,
After reviewing your post, it sounds like you want to move a file to another disk. I would recommend that you read this article, it may be able to help the issue.
iMovie: How to Save Projects to Another Hard Disk
To copy an iMovie project to another disk:
1. Quit iMovie if it is open.
2. Locate the project folder in the Finder.
3. Drag the project folder to the other disk.
Note: You must move the complete project folder, intact, to the other disk in order to successfully copy the project. The project folder has the same name as the project listed in the iMovie window. This folder includes the iMovie project file, as well as a Media folder, which contains all of the clips associated with this project. If you don't copy all of these items, the project may no longer be readable in iMovie.
Once you have copied the project, try opening it in iMovie to ensure that it copied to the other disk successfully.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Opening imovie project from external hard drive

I get this message: The project “last duly noted” was saved with an older version of iMovie. Opening it in this version will cause it to be upgraded, which will make it unreadable by older versions. Are you sure you want to open it?
How can I edit this item?

Hi Harmless - I do not think that your problem has anything to do with the external drive. Your project must have been crreated on an earlier version of iMovie - iMovie 4 perhaps, and contained in a standard folder. It can be upgraded to an HD project - best to use a copy for this, just in case....!
When you upgrade, it will firstly be converted only partially into the new version, so you have to take another step to fully convert>
Here's a comment about what should happen:
"A project created by iMovie 5 is a special kind of folder called a package. It looks and acts like a file. The package contains all the files and folders you see, but they are all hidden inside the package. To open the project in iMovie you double-click on the package.
If your project looks like an iMovie 4 folder instead of a package — so you can easily see inside — my guess is it's probably a project you've converted from iMovie 4 to iMovie 5. Converted projects do not look or act like true iMovie 5 projects. They contain the same files/folders but are stored in a conventional folder, just like iMovie 4.
That's not necessarily a good thing, for a user can get inside too easily, and open the project by double-clicking on that tilde file. If you do that, iMovie opens the PREVIOUSLY-saved version of the project. And when you next save, iMovie creates a second tilde file. Then a third, then a fourth. It's all too easy for the user to get confused, open the wrong project file and create quite a mess.
So it's a good idea, after converting a project from iMovie 4 to iMovie 5, to do a Save As to save the project into a new project. Then iMovie 5 builds a true iMovie 5 project that looks and acts like a real iMovie 5 project. Lots safer, and it works better." (as described by Karl Petersen)
So, you should experience no problems if you follow that advice - go ahead and convert!

Cannot open imovie projects

Hello,
I've spent the afternoon looking for answers and I've tried everything but still no luck.
I've been working at a project for the past week. This afternoon, imovie crashed when i was editing my project. When I opened imovie, the project was gone from the "project library." I navigated to the imovie project folder, and sure enough, the file was there. Problem is, imovie can't open it. I've clicked, dragged but nothing works.
I've even deleted the "com.apple.imovie8.plist" file but it doesn't help. Finally, i checked the console message and here's what i got:
6/19/10 6:42:20 6/19/10 iMovie[246] Skipping loading of project "South America" due to error: Unable to load project
6/19/10 6:42:20 6/19/10 iMovie[246] CoreText: Bad Glyph Found In 'kern' Subtable Of CTFont <name: Futura-Medium, size: 19.330000, matrix: 0x0>
CTFontDescriptor <attributes: <CFBasicHash 0x9bc870 [0xa0028ee0]>{type = mutable dict, count = 1,
entries =>
1 : <CFString 0xa006cd78 [0xa0028ee0]>{contents = "NSFontNameAttribute"} = <CFString 0xa0025fa8 [0xa0028ee0]>{contents = "Futura-Medium"}
Any ideas on how to fix this?
Thanks!!!!

This means that your original media files were not in your events folder but only links to them, with the originals stored somewhere else. If you look in the events folders inside your iMovie Events folder you will probably see aliases to the clips rather than the clips themselves. If you get info on the alieases they may identify where the original was stored (or they may say the original can't be found).
You must have moved your events folder at some point which broke the links so iMovie now doesn't know where to find them. You can still see the thumbnails in the timeline because these are small low resolution files which are in your project file. Unless you can move your folders back to exactly how they were when you created the project (and on the same computer) you will have to re-import the originals and re-insert them into the timeline.
You could as an alternative try putting one of the clips manually into your events folder in place of the broken alias to it and see if it appears in the timeline when you relaunch iMovie. If this works (I'm not sure if it will) you can do it with the rest and not have to touch the project timeline.
Geoff

Cant open iMovie projects

Help!! everytime i try to open an iMovie project it doesn't work. After i try to create an DVD , exporting to iDVD the following message appears: "The project could not be opened, because the folder is locked, or the folder permissions are incorrect". I checked the folder's permission and they are not locked. I cant figure out , what´s the problem. Does anyone know the solution to this? Thank you and forgive my english.

It's not clear to me whether the iMovie project has trouble opening or the iDVD project.
If iMovie complains about a permissions problem when you try to open the iMovie project, the problem can be fixed by re-building the project folders.
This workaround is for this error message in iMovie 4: "The project could not be opened, because the folder is locked, or the folder permission are incorrect. If the project is on a CD-ROM, network server, or locked disk, then copy it to your hard drive before opening it. If the project is already on your hard disk, then you may not have permission to modify that folder. Correct the folder permissions and try again."
Here's how to replace the current project folder with a new one in iMovie 4:
1. In Finder, create a new folder anywhere OTHER THAN inside the old project folder. Name the new folder "Replacement" or something.
2. Create a new folder inside the Replacement folder. Name it "Media".
3. Open the Media folder of the iMovie project, then choose Edit>Select All.
4. Drag all the selected files to the new Media folder.
5. Drag the files inside the iMovie project folder to the Replacement folder.
6. Repeat #2 through #4 for any other folders in the project folder.
You now have a new project folder named Replacement that contains all the files from the original project. Double-click the project file inside Replacement. If the project opens successfully, quit iMovie, rename Replacement to give it the name of your project, and you're done.
If it doesn't open successfully, move the project.mov file that's inside Replacement to some other folder and try again.
Karl

How to open my project library progress in timeline with FCPX 10.1?

So I've been having a huge problem with FCPX 10.1 and I cannot, for the life of me, figure out even what I'm supposed to ask--much less what the answer is.
So here's the basic problem. I don't know how to open my complete progress of a project library in the timeline. I have 5 projects, and two of them, for some reason unbeknownst to me, I just double click to bring up in the timeline. The other three, however, won't. Let me clarify more. One of the projects is not even showing up in the new 'Projects' sub-menu when selecting my library. The other two are showing up in the 'Projects' sub-menu, but aren't showing as having any content. Their time shows as 0:00. Now for one of the projects I mentioned before (the one that isn't even showing up in the 'Projects' sub-menu,) I know that its editing was saved because I worked on it several different times (having closed and opened FCPx in between) However when I was working on that video, I never removed it from my timeline. So whenever I opened FCPx, my progress it would just automatically pop up in the timeline.
My problem is this: I do not know where to reliably find my progress for my various project libraries and to open them in the timeline every single time.
If you need anymore information from me, please say so. My problem is very simply complex, because I'm just stupid enough with this software to not understand how to ask my question properly.
I worked on a specific project 3 weeks ago and I can't find the progress for it anywhere. I don't want to open specific clips in the timeline. During that project session, I had put all of my clips in the timeline and was editing them in specific ways that required them all being on the timeline so I could get a very specific and seamless effect. How do I get all of that progress into the timeline?

Okay so if I go into the sub-menu that pops up that contains all of my video and audio clips and right click the FIRST clip in my entire progress and load that into timeline, all of my progress is loaded as well--why is this the case? And why does the project itself show as having 00:00:00 progress in it?

Help.....How to Open a Project in WSAD..............

Hi Everybody,
I am new to WSAD 4...
I created a J2EE project.
My program is located in
C:\Program Files\IBM\Application Developer\workspace
Can someone Please tell me how can i open this project in WSAD.
I searched in help, but no help there..
I would appreciate if someone who used WSAD and tell me in simple steps how to open i would greatly appreciate.
regars,
kemsho.

Windows -> WorkBench

I need help asap. Does anyone know how to recover iMovie project that just disappeared?

I went to hit play on my iMovie project, which is finished and had been playing great. this time I hit play and the screen goes black and now it appears the project is gone. The title is still under the folders section, but no clips in there. I've looked in the Trash folder on the desktop and it's not in there. I can't locate it anywhere. I spent over 100 hours on this and am devastated, as it's for work. Does anyone have a suggestion of how to recover this project? I did save as a .mov file on my external HD, which I have re-imported - however...now it's a different looking project. I can't edit it, nor can I share it in any format under the iMovie>Share tab. Help -- someone has to have some ideas...

Do you have a Time Machine backup running on your system? Backup to an earlier point in time.

How to change iMovie Project from iSight to DV-NTSC?

I noticed my iMovie project says it's an iSight project, meaning everything will be converted to motion-JPEG's on export in full quality. But my project has both DV and MJPEG clips and I prefer to export my DV clips untouched, not converted to MJPEG. If the project was in DV-NTSC mode, DV clips would be exported untouched. (The MJPEG would be converted to DV but I don't care about that.)
How do I change the project type from iSight to DV-NTSC?

Yes, there is always that option. However, I want to make sure that when I export a DV clip to a DV file, it will be exported untouched. If iMovie is in MJPEG mode, I'm afraid it might convert the DV clip to MJPEG and then back to DV.
It doesn't matter now since I've figured out how to switch between iSight and DV-NTSC modes. You can't do it in the application, but you can if you edit the iMovie project file itself. Towards the end of this file look for either ISIGHT or DV-NTSC. If it's not the one you want, replace it with ISIGHT, if DV-NTSC, or DV-NTSC, if ISIGHT.
Why is it important which project type you have? I've learned that video effects like transitions and fades are done in the default format iMovie has selected for your project. So if iMovie labeled your project as iSight (MJPEG), then all of your subsequent video effects will be rendered in MJPEG. If iMovie labeled your project as DV-NTSC, video effects are rendered in DV. This is important to know because effects rendered in a clip's original format are rendered much faster and may look better than if they weren't. So if you have a DV clip you wish to apply an effect to and the project is recognized as MJPEG, rendering the effect will likely be slow and the results may look bad.
This is just another annoying quirk that I've discovered during the course of editing a project. Seems like once I've figured out all the quirks of a particular version, another comes out with a new set of quirks.

How to open iMovie project

Similar Messages

Maybe you are looking for