How to open ipod for sad face?

I have TRIED EVERYTHING FOR THE SAD FACE AND I THINK A LOT OF PEOPLE HAVE SIMILIAR PROBLEMS AS I DO. I GET AN APPLE ICON , THEN THE SAD FACE THEN NO BATTERY AND THEN MY IPOD MAKES NOISES , DIES AND THEN AGAIN APPLE LOGO AND THE THE WHOLE CYCLE REPLEATS. PLEASE PLEASE HELP ME .!!

AN APPLE ICON , THEN THE SAD FACE THEN NO BATTERY AND
THEN MY IPOD MAKES NOISES , DIES AND THEN AGAIN APPLE
LOGO AND THE THE WHOLE CYCLE REPLEATS. PLEASE PLEASE
HELP ME .!!
I have this exact same issue! it started a couple of days ago. Right now i just have it charging to see if that helps, but it has been about 45 minutes with no change. I definitely do not want to take mine apart though...
I've only had it for about 15 days.
  Windows XP  

Similar Messages

  • Help! exclamation point and ipod with sad face

    what does this mean someone please help...

    Gunit454,
    Exclamation point:
    http://docs.info.apple.com/article.html?artnum=61003
    iPod with sad face:
    http://docs.info.apple.com/article.html?artnum=61771
    You have to be patient, until someone else posts. There's nobody sitting here waiting for a new post to show up.

  • HT1349 How to open unlock for my iphone

    How to open unlock for my iphone

    Are you talking about the slider to unlock your phone or you have forgotten your password to unlock it?
    Or are you referring to unlocking your iPhone from a carrier?

  • Ipod with sad face and will not stay in disk mode but hdd works

    Hi,
    I've got a problem with my ipod and i've tried everything to fix it and nothing works.
    So basically after my ipod gave me the sad face I tried putting it into disk mode and that worked successfully! However after I plugged it to my computer, it would (after a few moments and windows detects something being plugged in) it resets itself and gives me the sad face again and following that a sign comes up saying Please Wait Very Low Battery.
    I know its not a low battery problem since during disk mode the battery is full.
    Other strange things is that in Diagnostics mode the HDSpecs section just shows just a bunch on meaningless characters and numbers for each of the specs listed. I thought that this may have just meant I had a broken harddrive so i got one of those ipod harddrive to IDE converters and plugged by ipod harddrive in (yes i now have opened the ipod). Strangely enough the ipod hard drive appears on my computer and works beautifully and i can read and write to the drive.
    I went though the forums and found someone with the exact same problem and was solved:
    http://discussions.apple.com/thread.jspa?messageID=7244984&#7244984
    However the person never said how they solved it except that they followed the guide posted by Mitch 751 which I also tried to no success.
    Does anyone have any ideas what else I can try?
    Cheers,
    Victor

    same problem mate ???

  • Ipod has sad face

    ipod has a sad face how do you reset

    just go into itunes and click on your ipod then click restore - you might be able to fix it without reseting it though (this won't clear all your data off) toggle the hold switch on and off, then press and hold the centre button for 6secs - then the apple logo should come up. if this doesn't work just restore it on your pc. pls put this as correct answer

  • Got new ipod mini, wont charge! Shows ipod w/sad face

    I just bought a 4GB ipod mini. Whenever I charge it [i use the charger on the "iHome" dock] it first shows the apple logo, then after a few seconds it shows the little ipod with a sad face, and it says "apple.com/support/ipod" then after displaying that for a few seconds, a little picture of a battery and an exclamation point next to it flashes really fast, then it repeats the whole thing over again. I have never used it before that is why i am worried!! has this happened to anyone else?? I know that it isnt the iHome charger because my sister has used it on her mini ipod and it worked perfectly!

    AH! sorry wrong section to post it in!

  • Frozen ipod with sad face

    when i push the menu button i get the sad face w/ exclamation point. i've tried to follow all steps except restoring the ipod. what can i do from here?

    Or you can try to do step 9
    1. Try these five steps (known as the five Rs) will conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    Still can't see your iPod?
    Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check each one starting from the top of the list to see if that is what's keeping iPod from appearing.
    3. Try to wait 30 minutes while iPod is charging.
    4. Try another known-good FireWire or USB through Dock Connector cable.
    5. Try another known-good FireWire or USB port on your computer .
    6. Try to disconnect all devices from your computer's FireWire and USB ports.
    7. Try to connect on a different computer i.e. a PC formatted iPod connect with a Mac computer or Mac formatted iPod with a Window base PC.
    8. Try to do a Erase (Disk Utility) on a Mac computer or a reformat with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer).
    9. Try to run the iPod in “Diagnostic mode” . which can be accessed by pushing the “hold” switch into the “on” position and then “off” (into the original position). Then press the following buttons in the following order: “menu” plus “select” (centre button) then press “reverse” plus “select”. This will take you to the hidden diagnostic mode screen menu. It may take a few trials and pressing the buttons in the right way for this to work, so be patient and keep trying if you have to. The diagnostic mode will give you 7 choices which are: Memory, IO, Power, Status, SysCfg, Diskmode, and Reset. Don’t bother trying “reset” because in my case it didn’t work it just took me back to the same problem. Instead, choose “diskmode”, after which you should get an odd looking “ok to disconnect” sign on the iPod screen.
    If one of the above step helps to get your iPod to be recognized with your computer, do a Restore.
    But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
    I strongly suggest that you should find a Mac computer and do a Restore there, your iPod is likely to get recongized in this way.

  • IPod 5g, sad face BUT boots into disk mode

    Hey everybody, I have a iPod that my uncle brought me, he says it's his sons, but he doesn't need it. This ipod boots with apple logo, hdd making clicky sound, and then a sad face appears for about 4 seconds and shuts down. If I try holding center and play buttons, it does boot into disk mode, but before that it says that I have to connect it to the computer to restore it, but itunes doesn't recognize it. But computer does. is there any way to fix it?

    The Sad face icon is usually a very good indication of a hardware malfunction or failure usually with the iPod's Hard Drive, which would also explain the loud clicking noise you are hearing. 
    Have you seen this article yet?
    iPod display's a sad iPod icon
    If you are up for the challenge, you can also try all of the troubleshooting mentioned described by another forum member Mitch 751.
    https://discussions.apple.com/thread/1193481?start=0&tstart=0
    B-rock

  • Got new 4GB mini ipod, wont charge!! shows ipod w/sad face! HELLLP!

    I just bought a 4GB ipod mini. Whenever I charge it [i use the charger on the "iHome" dock] it first shows the apple logo, then after a few seconds it shows the little ipod with a sad face, and it says "apple.com/support/ipod" then after displaying that for a few seconds, a little picture of a battery and an exclamation point next to it flashes really fast, then it repeats the whole thing over again. I have never used it before that is why i am worried!! has this happened to anyone else?? I know that it isnt the iHome charger because my sister has used it on her mini ipod and it worked perfectly!
    Please help!

    Hey.. well the same sad face thingy happenned 2 me b4 and the weird thing was it went away! after a day! but nyway my advice.. go to ipod + itunes on the top tab and look at troubleshooting to find out to fix the problem. One place is: http://www.apple.com/support/ipod101/help/3/
    The second thing about the battery and an exlmaation point, it means its not charged* and if you can't plug it in2 the computer theres not much u can do. Well, i recon theres somethin wrong, but im tellin ya, go to the toubleshooting and try that and hopefully it will work. Happy Holidays
    *Im not a proffesional dude, so i cant guarentee im right - as im basing my facts on my own knowledge.

  • Ipod with sad face

    my ipod has a sad face on it what do i do.

    I droped my ipod on the pavement and now when it turns on it comes up with the apple logo then the sad face, I have had my ipod for about 2 years now so it isnt in it warenty anymore. It is a 4th generation 20GB if you need to know but it is in very good condition still.
    None of the solutions i have found work. Do you knw what to do?
    thanks

  • How to open LOV for subject under subject details in Qualification form

    Dear Experts,
    I want to open LOV for the subjects field in the Qualification form in HRMS. Please can you guide me to the field name and and the process for it. Please also guide me how can i make it an open field if i decide to that?
    waiting for your expert opininon
    Edited by: MNS on Jan 3, 2012 3:49 AM
    Edited by: MNS on Jan 3, 2012 3:51 AM

    I don't think you can do that easily, apart from maybe a custom version of the form with a custom view of the underlying data.
    The problem you have is that the data is presented on the screen via a view; within the view definition, part of the join condition for retrieving the subject meaning will rely on the presence of a matching code in hr_lookups for the code that represents the subject. So, even if you took off the lookup logic from the field (assuming it's even possible to do that), there is a high probability that the 'free format' data won't be retrieved in any query.
    Clive

  • IPod Mini - sad face! "Loaner" iPod?

    OK...so I got the sad face, and tried everything the website suggests. I took it to the Apple store and it appears that I'll have to send it in. What I'm wondering is if I borrow an iPod from a friend and load my music, can he then turn around and re-load his library from his computer? Does that make sense?
    I REALLY cannot live without my iPod!!!
    PC   Windows XP   iPod Mini

    Yes, he can simply plug it into his computer and put his music back on it.

  • Ipod has sad face & other things HELP!

    my ipod won't do anything! it froze and then a sad face ipod popped up! i tried restoring it but the updater keeps saying, "can't mount iPod" and my iPod, meanwhile, has the apple logo on the screen constantly and then it flashes and the sad face pops up, and then a battery comes up even tho it says the battery is full! i have no idea what 2 do! HELP

    Sad iPod face
    http://docs.info.apple.com/article.html?artnum=61771

  • Ipod showing sad face

    my ipod is showing a sad face and makes weird beeping and whirring noises. what can i do so i can fix it.
    Dell   Windows 2000  

    See these troubleshooting articles.
    My iPod is sad.
    iPod displays a "sad iPod" icon. (this is the article that the other poster in this thread has simply copy/pasted as a reply)
    What does this picture on my iPod mean?
    Also, there is a pretty comprehensive post written by another forum member which is about the sad iPod icon. Be aware that it's quite involved and contains some info that will almost certainly void the warranty. If your iPod is still within the warranty period, you should use that option first.
    The Sad iPod icon.

  • How to open Ports for App running in VPC

    Trying to open ports for a Windows app that I am running via VPC but the application still shows the port is unreachable.
    So far I have, opened the port in Mac OSX Firewall, opened ports on my D-Link DSL504G router, disabled the Windows firewall (plus opened the ports in case it became enabled).
    Have also redirected the ports to the IP address within VPC Windows and the Mac itself.
    Have run out of ideas as nothing seems to work.
    Regards
    Alan

    Try the following ...
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): <enter the appropriate UDP port values>
    o Public TCP Port(s): <enter the appropriate TCP port values>
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
    o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

Maybe you are looking for

  • How long does it take to update latest Mountain Lion OS?

    I have just updated my OS to the latest version of Mountain Lion. It is 10.8.5 now. however when it restarted, it stopped at the gray Apple logo screen and now the beach ball has been spinning for a long time. Is this normal? How long should I expect

  • Library Snippets and your approach to use on a page

    Hello, More of a philosophical question today. Recently I started using Qtip for my hover bubbles (or whatever they're called ) and I needed to add a couple of links: <script src="http://code.jquery.com/jquery-1.3.2.min.js"></script> <script type="te

  • Solaris 10 3/05 x86 partition problem

    I have tried to install Solaris 10 Express 3/05 on a blank 30GB IDE HDD(c0d0). When I tried to install, install shows error: slice "/" cannot exceed 1023 cylinder in HBA (something like that). I tried to keep /var, /usr, /home, /opt out of /, but sti

  • Pivot table runtime error 1004

    Hello, i have problem with creating pivot table using vba...this is the code: ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "Zdroj!R1C1:R" & Pocet & "C5", Version:=xlPivotTableVersion12).CreatePivotTable _ TableDestination:

  • Captive portal on rv220w?

    Hello Does the cisco rv220w have captive portal like the rv180w does, or will it be supported in future firmware? Sorry for my bad English Thanks in advance Dennis