How to open mac hd directory

how to open mac hd directory

What do you mean?
Does HD show in Finder?
Does the HD show in Disk Utility?

Similar Messages

  • How to open MAc os after windows installed

    hi
    today i install windows 7 ultimate in my 27\ iMAC after i cant open MAC OS what to do

    You didn't say how you installed MS Windows so I'm going to assume you followed directions using Boot Camp. If that is correct then restart the machine when you hear the Startup Tone hold down the Option key and choose the volume that has OS X installed on it.
    If you did not use Boot Camp then please restate EXACTLY how you installed MS Windows.

  • How to open .mac bookmark seperate window in Safari?

    I used to use Firefox or Camino and when at .mac I could click on 'bookmarks' and a new window would open with the bookmarks more or less displayed [not necessarily updated ]
    In Safari a new tab opens but .mac does not appear to offer the same options for the frame as it does when it is a new, albeit small, window.
    I enabled pop-ups and also have Saft and Stand installed.
    Thank you!
    iMac 2.0 GHz Intel Core Duo 20" 512MB (early 2006)   Mac OS X (10.4.6)   iBook G4 OS X 10.4.7 256MB

    In Stand, uncheck "Open '_blank" Link in a New Tab".
    I don't know if Saft also has a similar feature since I don't use it though.

  • How to open mac os extended journaled hdd in windows 8?

    Hi I just bought a new 2TB HDD and i formatted it to Mac OS Extended (Journaled). However when I tried to open it on my PC with Windows 8 it was detected but not loaded. Is there any way that I can read and write this HDD on Windows 8?
    Thanks.

    Buy a copy of HFS for Windows.
    HFS for Windows - file system driver | PARAGON Software ...

  • How can I use automator to open terminal change directory run a python script?

    Hi all,
    I dont really ever use automator - which may be my big problem - and I am trying to make an apllication that seems fairly simple in theroy. I want something that will lunch terminal, cd to the place where my python script lives and then run it. I have tried a number of suggested ways and can get the terminal to open and the directory to change but cant figure out how to run the script. This is my workflow if i did it manually each time
    - open terminal
    - type cd "the place where my file lives"
    - type python uploadr.py -d
    I can get terminal to open then cd to the right place but cant get the "python uploadr.py -d" to run without an error.
    any help would be very appricated
    thanks!!!
    J

    this is the script I got closest with - I know its something to do with breaking those two commands up but i just dont know how to do it
    on run {input, parameters}
              tell application "Terminal"
      activate
                        if (the (count of the window) = 0) or ¬
                                  (the busy of window 1 = true) then
                                  tell application "System Events"
      keystroke "n" using command down
                                  end tell
                        end if
                        do script "cd /Users/behole/Desktop/FlickrUpload/" & "python uploadr.py -d" in window 1
              end tell
              return input
    end run
    this is the error I get in terminal after I run it
    Last login: Mon Jul 23 15:37:17 on ttys000
    be-holes-MacBook-Pro:~ behole$ cd /Users/behole/Desktop/FlickrUpload/python uploadr.py -d
    -bash: cd: /Users/behole/Desktop/FlickrUpload/python: No such file or directory
    be-holes-MacBook-Pro:~ behole$

  • How to open cd/dvd drives mac pro without having a apple pro keyboard

    how to open cd/dvd drives mac pro without having a apple pro keyboard

    Go to System/Library/CoreServices/Menu Extras and double click the Eject.menu item to add an eject icon to your menu bar.

  • I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"?

    I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
    So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.

    wjosten is spot on.  If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
    Ciao.

  • Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

    Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined  settings to run the cd's and dvd's ?

    A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • I have installed Elements 13 on my Mac but can't see how to open it. When I click on the disk icon it takes me to an information page that gives no information about opening Elements 13.

    I have installed Elements 13 on my Mac but can't see how to open it. When I click on the disk icon on the desktop it takes me to an information page that gives no information about opening Elements 13. How do I open the software so that it can be used?

    Unfortunately, when I open applications, adobe photoshop elements 13 folder does not appear in the adobe folder. It appears as a disk on the desktop, only.

  • How to open a MAC desktop

    How to open my Mac?

    It's not something most would want to attempt and it will definitely void the warranty if it's still covered. Assuming you've got a fairly current iMac:
    http://www.ifixit.com/Teardown/iMac-Intel-27-Inch-Teardown/1236/1

  • Switching to MAC from Windows: How to open files in Office 2007  VMFusion?

    Dear all,
    Intro:
    I switched to MAC and now cannot find the solution to a simple problem.
    First: I need an Office 2007 PowerPoint FULLY compatible solution.
    What did not work: IWork, NeoOffice, Office 2008 (this is not fully compatible with Office 2007 Files)
    I also had problems with: Parallels (not stable, too many hangups), codeweaver crossover (office files do not even open sometimes, good idea but not suitable for serious office jobs)
    Now I have VMWare Fusion with WinXP and Office 2007 as this seems to be the only truly stable and best solution to run Office 2007 on Mac
    Question:
    How to open files in Office 2007 on MAC VMWare Fusion easily?
    It would be nice to spotlight the file and click and it opens in powerpoint or excel or word 2007 in Virtual Machine.
    The only known solution to me is to use the Windows explorer to navigate to the file and then open it from Fusion WinXP. This is very cumbersome and honestly makes me think of getting back to a windows machine as I work with office frequently.
    Thank you for your help.

    Thank you for the quick reply.
    Yes, I have Office 2007 installed. The problem is that to open files in Fusion virtual machine I have to use the windows explorer and navigate to the file to open it. Now that I have the mac I want to use the good feature of spotlight. So when I search and find the file I want to open I cannot click on it on the mac (or in finder) but I have to switch back to the virtual machine, locate the file again and open it from windows.
    You might think - ok, why not skip the first step of using spotlight, and look up the file in windows explorer before anything else?
    Correct, but I know from parallels that there is a file association possible to directly access the file in office 2007.
    This does not seem possible in Fusion - So the question is whether there is a possibility on the mac to associate the file and to click on it in finder/spotlight and the office 2007 application in fusion opens the file. So far I could not find anything.
    Thanks

  • How do you restore a passport ilibrary file to a Mac iPhoto directory?

    My objective was to move photos and movies to an external hard drive.  I was successful in moving DVD projects.  Now I have movies that it cannot find some the pictures and clips which are in iPhoto events.  I probably messed up by moving iPhoto events to the HD which created the disconnect when I deleted them from the Mac library.  In attempting to fix this I copied the iPhoto library to the HD and attempted to restore the library version from 11/6 which was before I started all the moving.   When I copied the library file from passport to the mac hard drive it did not go into the iPhoto directory.  iPhoto did not find it when I attempted to link to it but I was able to manually find and link to the mac hard drive library of 11/6.  Plus iMovie still does not recognize the photos in projects so I'm as broke today as I was yesterday. 
    Before starting this I researched in the Apple Community including buying the iPhoto library manager app.  Obviously I've missed something!!
    (I'm running OSX 10.9.5, iPhoto 9.5.1 and iMovie 10.0.5)
    1. Is there a way to restore the passport library to the Mac iPhoto directory?  Or is this not necessary?
    2. How can I relink the movies to their photos and clips in the iPhoto library?  Or am I toast? 

    Sorry bu we can not see you or your computer
    How exactly did you do this move?
    The correct way (the only way actually) is to be sure the external drive is formatted Mac OS extended (journaled) and then
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    As to your specific questions
    1 - that totally depends on knowing exactly what you did and how you moved the iPhoto library - if you followed the above instructions exactly then you can simply drag it bace as a single entity
    2 - Again with no details no one knows - moving the library correctly using a default "managed" library (the iPhoto preference to "copy imported items to the iPhoto library is in its checked state) changes nothing - if you made the poor choice of having a referenced library(The iPhoto advanced preference to "copy imported items to the iPhoto library" has been unchecked) which is strongly NOT recommended. then you can not relink with iPhoto (Aperture can) and you will have to move the library back to the main drive so the path to the referenced originals is the same as when they were imported
    LN

  • How to open documents no longer supported by Mac

    I have text files that will not open "Np longer supported by Mac etc"
    How to open and with what program application.
    Eudora mail
    Text Edit
    Word

    Eudora mail -- eudora mail client still exists.  Download it.
                          -- seem to recall Thunderbird will import eudora email.
    Text Edit  --  You mean this? http://en.wikipedia.org/wiki/TextEdit
    Word -- older versions of word are real inexpensive on ebay. 
               --  Open office http://www.openoffice.org/porting/mac/
               -- http://features.en.softonic.com/5-free-alternatives-to-word-on-mac

  • How to setup Wireless Clients MAC+Active Directory based acess

    Dear Gents,
    I want to setup Wireless Clients MAC+Active Directory based acess on AP 1242 standalone Wireless series .
    Steps i have configured :
    1) SSID manger  under Open authentication : Selected with EAP.
    2) under advacned Radius : s
    MAC Address  Authentication
    MAC Addresses Authenticated by:
    Authentication Server Only
    3) Server Manger : Current server list
    added the radius ip address 10.1.200.x
    EAP  Authentication
    MAC  Authentication
    Accounting
    Priority  1:  < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
    Priority  1: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
    Priority  1: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
    Priority  2:  < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
    Priority  2:  < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
    Priority  2:  < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
    Priority  3:  < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
    Priority  3:  < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
    Priority  3: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
    From ACS - Radius  we have choose a Group x( named as Mac-address group )
    All the wireless Client ( laptops ) mac-address are added as add username option and enter username
    as mac-address & enter the mac-address as pwd second option of password TAB.

    Hi Akber,
    I think you didnt understood what i was trying to say here :-( No problem..I will explain my theory again.Your requirment is to autheticate user from ACS internal database (you have already added the MAC address as the username on your ACS internal database) as well as from ACS external database (in your case this is AD).
    What i was saying is when when authetication request comes to raidus server it checks its internal database and if it find a valid username and password (here it will the MAC address and password which you have entered to the ACS database) the ACS will not query the external database (in your case the AD) for authetication.
    You can not have ACS to look in to both MAC and AD database at the same time.
    Hope this clears your doubt.
    Regards
    Najaf

  • How to open the choose application dialog on Mac?

    Hi all,
    I want to know how can we open the "choose application" dialog from InDesign. I want to give this functionality through right click context menu.
    At present CS4 has this feature - steps are as follows:
    1.Create a document.
    2.Place an item on the document.
    3.Now select the placed item and right click on it.
    4.Go to "Edit With->Other..." option.
    5.Choose application dialog opens up and user can select the application in which he/she wants to open the selected item.
    I want the same behavior but not able to understand how to open the choose application dialog on Mac. I have already achieved this on windows.
    I think that there might be some system API's for Mac to get this working.
    Please let me know about this, any help will be appreciable.

    Is this not sufficient? Looks like  you get some defaults then an "other" at the bottom as well. Control click or right click, when using the white arrow on the image.

Maybe you are looking for