How to open MAc os after windows installed

hi
today i install windows 7 ultimate in my 27\ iMAC after i cant open MAC OS what to do

You didn't say how you installed MS Windows so I'm going to assume you followed directions using Boot Camp. If that is correct then restart the machine when you hear the Startup Tone hold down the Option key and choose the volume that has OS X installed on it.
If you did not use Boot Camp then please restate EXACTLY how you installed MS Windows.

Similar Messages

Can't boot into Mac OS after Windows install via Bootcamp

Hello.
Last night I installed Windows 7 on my Macbook Pro early 2011 via Bootcamp.After some major complications I was able to finally install Windows 7 and boot into it. Now I can't boot back into my "Macintosh HD" partition, it shows a no entry sign.
Hard Disk : 320GB Internal Sata
Partitions : 3 -> Mac, Bootcamp and 10.8 Recovery Partition
The good part is that I can still access the Mac OS partition in Windows and Windows is working perfectly fine. As a matter of fact right now I'm on the bootcamped windows.
I have a full time machine backup but still I am looking for a way to solve this without formatting the HDD.
Things I have tried:
1. Resetting NVRAM and PRAM
2. Booting into 10.8 recovery partition and running DU.
SMART Status : Verified
"Macintosh HD" grayed and Not Mounted
Successful Verify Permissions (Twice)
Is there a way to solve this? Though the Mountain Lion partition shows when I press the Alt/option key on startup but I can't somehow boot into it.
Thanks

Your problem is OS X is refusing to boot.
There is still a bootable volume on the Macintosh HD partition, it's just not working.
You can #8 Reinstall Just OS X while command r booted from the Recovery partition, as long as you don't use Disk Utility to erase the Macintosh HD partition, your files and programs remain.
Hook the computer via Ethernet cable to a router (or modem, power reset required) with a fast relaible internet connection, you will need your AppleID and password to reinstall OS X.
Step by Step to fix your Mac

Remove or reduce Mac OS after Windows install

This may be an odd question, but first a little background.
I bought the 2011 MacBook Air as my first introduction into the world of Macs and thought it would also fulfil the occasional work duties due to the promises of how easy it is to integrate a Mac into a PC world since MS Office is available on both platforms. For personal use Mac OS has been a breath of fresh air, intuitive gesture support makes browsing and editing photos fun again as well as playing around with using it as a media server, and Keynote has taken over for my presentation needs.
However working as an accountant means MS Excel, Outlook & Sage are central to my working day and due to various incompatibilities in the office, such as Mail & Outlook 2011 failing to work with our office's 2003 exchange server for one, and MS Excel 2011 being very much the poor cousin to Excel 2010 I ended up setting aside a 64Gb (of 256Gb) partition via Bootcamp to run Windows 7.
Little did I expect how good a Windows PC the MacBook Air makes! Maybe it's the SSD drive but this thing easily lives up to the top of the range i7 HP desktops we use in the office so rather than using the Windows partition for the odd bit of remote working which was the plan two years ago, it is now my main work computer. In fact after I added a couple of Displaylonk adapters I now have a four screen set up (3 x 22" 1080p Dell monitors plus laptop screen) which is the envy of the office.
So, I've since replaced my personal Mac needs with a quad core Mac Mini and haven't booted into Mac OS on the laptop for months and as you can probably guess but that 64Gb is running out quite fast.
I know I can't simply resize the partitions without causing possibly major future headaches and all this MBR/GPT/EFI stuff is unfortunately a little over my head so don't want to do anything crazy (like formatting the Mac OS partition which I've considered) without first getting some advice.
I don't really fancy wiping out the Bootcamp installation and starting again if at all possible, and don't mind keeping Mac OS around but I know that it is highly unlikely that I'll ever need it again on my Air and would probably jump for the MacBook Pro if I ever did need a portable Mac again.
Any help would be greatly appreciated :-).

Thanks guys, so I guess that means formatting the Mac partition from inside Windows definitely isn't a simple option then.
So... this leaves me with a couple more questions I'm afraid.
Firstly, I've read that Camptune can cause issues later down the road as it doesn't update the partition tables fully (or something?) which can lead to the possibility of losing Bootcamp later on - but that may only be when updating OSX, which is something I don't really plan on doing so may not be an issue for me?
and Secondly, how easy is it to completely purge OSX?
I can't risk losing access to Windows for any length of time as my work life has become ridiculously hectic lately. So I can't really risk trying this until I have had chance to set up another PC as back up just in case something goes wrong. However with space rapidly becoming a premium on the Windows side it is a case of time is running out.

How to open .mac bookmark seperate window in Safari?

I used to use Firefox or Camino and when at .mac I could click on 'bookmarks' and a new window would open with the bookmarks more or less displayed [not necessarily updated ]
In Safari a new tab opens but .mac does not appear to offer the same options for the frame as it does when it is a new, albeit small, window.
I enabled pop-ups and also have Saft and Stand installed.
Thank you!
iMac 2.0 GHz Intel Core Duo 20" 512MB (early 2006) Mac OS X (10.4.6) iBook G4 OS X 10.4.7 256MB

In Stand, uncheck "Open '_blank" Link in a New Tab".
I don't know if Saft also has a similar feature since I don't use it though.

How to open pages documents with windows vista

Does anyone know how to open pages document with windows vista? i saved it onto a usb stick but when i tried to open it on the computers in my university which support windows vista, it didnt reconise the file and opened with a page of question marks!!!! Im panicking now!!!!!
Id appreciate any help!!! thanks!!!!!

beckstarr wrote:
Does anyone know how to open pages document with windows vista? i saved it onto a usb stick but when i tried to open it on the computers in my university which support windows vista, it didnt reconise the file and opened with a page of question marks!!!! Im panicking now!!!!!
You cannot open it on Windows Vista. The only application in the world that opens a Pages document is Pages, and it is Mac OS X only.
Your options:
1. Find a Mac with Pages installed, and save the document as doc or pdf, which you can open on Vista.
or, if that is impossible,
2. Open the files in a texteditor like Notepad.exe on Windows and try to piece text fragments together to get at least part of your original text back. The images should also be available somewhere, even though all formatting is gone.

How to open my documents on windows 8?

how to open my documents on windows 8
pavilion p7-1234
model:mxu23701n8
This question was solved.
View Solution.

There are a couple ways you can do this, here's one:
1. On the Windows 8 Start screen, move your mouse to the bottom left corner of the screen.
2. Right-click in the corner, and a menu should appear. Click File Explorer.
3. The Computer window appears on the Windows desktop. Click the file location from the navigation panel on the left. (Example: If the file you're looking for is in the Documents folder, click Documents, and browse to the desired file.)
I hope this helps. If have further questions please let us know!
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee.

I am having trouble opening Adobe Reader after I install it in my Safari.

I am having trouble opening Adobe Reader after I install it in my Safari. I have installed reader about 10 times now and it says I can use it now, but when I try to open a file it tells me I need to launch Reader and Agree to terms. I really need to use it now for school. Please help. Thank you, Heather

You need to open Reader outside of Safari Start>All programs and accept the agreement.

HT3986 How do I right click on Windows installed using Bootcamp?

How do I right click on Windows installed using Bootcamp?

It should work the same way it does in OSX, but for it to work correctly, you need to install the Boot Camp drivers in Windows. You can do this by using the Boot Camp Assistant in OSX, then creating the "Windows support software (drivers)" package. Follow the instructions there, then use the resulting thumbdrive to install the drivers and apps into Windows. Then you should be able to two-finger-click the touchpad or right-click your mighty mouse or other two-button-enabled mouse.
http://support.apple.com/kb/HT4407 for more info on this.
Caveat: I've done this, and I've found that the two-finger-click in Windows is iffy. That is, it frequently triggers a left-click function instead of right-click. :-/

How to open mac hd directory

how to open mac hd directory

What do you mean?
Does HD show in Finder?
Does the HD show in Disk Utility?

How to Get HP Drivers After (DIY) Installing Windows?

Series: How to Re-Install Windows when you don't have the Recovery Discs
Intro: What is an ISO? Why is it used?
Step 1 - Get the ISO - ISO Download Links
Step 2 - Burn the ISO to a DVD or USB
Step 3 - What to do with the ISO DVD/USB? Change the Boot Order
Step 4 - What to do After Windows is Installed? How to Get HP Drivers?
Step 4 - What to do After Windows is Installed? How to get HP Driver?
Winodws is Installed, Now What?
Once the installation is complete, you'll need to go to your HP Driver Page and download all of your drivers. Your wireless function may not work automatically with a fresh install. You may have to plug an Ethernet cable into the computer and into your router to connect to the internet initially, until you have downloaded your wireless driver.
The best way to use the HP Driver Page, is by putting in your product number ('P/N' found on the HP label on the bottom of the computer) and click Go, rather than the 'Detect my product - Find Now' option. Without an HP Recovery Disc version of Windows, the 'Detect my product' option is not likely to work properly.
Another important note: If you had to go all the way into BIOS and change the Boot Order to the DVD drive (or USB), you'll have to go back into BIOS at your convenience and change the Boot Order back to booting from the internal Hard Drive first. If you used the F9 Boot Order Menu, it only changes the Boot Order temporarily, for that one power on iteration.
If you have any questions, create a new post (How to Create a New Post - Video), copy and paste it's link into a private message to me, and I will respond on your thread

Note down all the file names of the following queries first:
SELECT NAME FROM V$DATAFILE;
SELECT NAME FROM V$CONTROLFILE
SELECT NAME FROM V$TEMPFILE
SELECT VALUE FROM V$PARAMETER WHERE NAME = 'spfile'
If the last query doesn't show any file then copy $ORACLE_HOME/dbs/init<SID>.ora file.
After making the list in sqlplus issue:
SHUTDOWN IMMEDIATE
And now you can copy all of those files to some other location. Make sure you install same version of OS and Oracle to restore these files. It would be easy for you if you keep the same directory structure after reinstall and place all those files as they were earlier.
Daljit Singh

For a SharePoint list LVWP - how to open links in new window? (Without SPD - Without access to server)

Hi there,
I canNOT use SharePoint Designer nor do I have access to server to change any 14 hive files.
I have a SharePoint 2010 List with a field of type Hyperlink. I need these links to open in New Window. Only links with-in this LVWP should open in new window (and not links on Quicklaunch or top nav).
Any clues how to achieve this please? JS is okay.
Thanks.

Hello,
The good news is that you're not the first to have those requirements!
Here's the JavaScript:
<script>
var allLinks = document.querySelectorAll("table.ms-listviewtable tr td a");
for(var i=0; i<allLinks.length; i++){
if(allLinks[i].onclick == null){
var targetUrl = allLinks[i].href;
targetUrl = targetUrl.indexOf("?") > -1 ? targetUrl + "&isDlg=1" : targetUrl + "?isDlg=1";
allLinks[i].href= "javascript:var options = {width:500, height:300, url:'"+targetUrl+"'}; SP.UI.ModalDialog.commonModalDialogOpen('"+targetUrl+"', options);";
</script>
This script can be saved to a text file and uploaded to a document library. You can then add a content editor web part below your list view web part (so that it doesn't execute until after the list view has loaded) and set the "content link"
property of the web part to be the path to the uploaded text file.
The solution was originally posted here:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/8ca275df-1d9c-4d0f-a624-c0531fda069a/how-to-open-model-dialog-onclick-of-list-item-hyperlink-column?forum=sharepointdevelopmentprevious

Reader XI how to open docs in one window

how do I set Reader XI to open docs in one window instead of a separate window

https://us-mg5.mail.yahoo.com/neo/launch
Apr 13 at 9:19 PM
everything boils down to semantics, but here goes. I mean one acrobat window with multiple tabs as needed. just like I used to have before I got this pc with that monster Win8. currently I have a separate acrobat window for each file I have opened. Thus 6 files, 6 windows
i'm considering killing this version and installing ver. 7 or something like that
Thanks for your time.
john

Can't open itunes,even after un-installing and then re-installing!

I keep getting the following error message when trying to open itunes on my pc.
'The folder "itunes" cannot be found or created, and is required.The default location for this folder is inside the "my music" folder.'
This error message appeared even after un-installing and re-installing itunes.
I conducted a search for the 'my music' folder,and it came up with nothing.
Please help!

If you truly don't have a folder named C/......./My Music, there are bigger problems with that PC.
That folder is a default windows XP folder and should be there.
The file extensions setting is easy to change. Win Explorer > Tools > Folder options
http://www.fileinfo.com/help/windows-show-extensions.html
If your music folder really doesn't exist, see if you can do the shift-start and CREATE a new library. It will be blank, but at least that will tell us if itunes can even start. It will NOT run without an ITL library file.

Impossible to open .dtproje file after re-installing SQL Server Management Studio

Hi all,
today, after re-installing SQL Server Management Studio from a package downloaded from MS web site (SQLManagementStudio_x64_FRA.exe), I tried to open a SSIS package file via Visual Studio and I get a message stating that this type of project (.dtproj)
is not supported.
Here are the events that lead to this problem:
We have SQL Server 2005 installed on a server and are planning to migrate to SQL Server 2012.
1 - Earlier this year, to solve a problem that we had with the SSMS client, we installed SSMS 2012 client on my station.
At this point, it worked fine for SSMS and when I tried to access SSIS it converted the packages to SSIS 2012 and it worked fine too.
2 - Yesterday, I tried to access SSMS and I had the message that the test period had expired; at this point I could open a SSIS file.
3 - To solve the problem with SSMS we decided to re-install it. It worked fine for SSMS but now I am not able to open a SSIS file.
Do you have any idea of what the problem is and what should I do to solve it?
It seems that there are some SSIS component missing, how could I get them back?

You are welcome Sylviep,
Based on what I see you want to create BI projects (e.g. a SSIS project), thus it will be enough to install SSDT
which is part of the SQL Server installation media. I do not see why you would re-install SQL Server itself.
Arthur My Blog

How to open files using the Windows associated program?

I have a LV program that is generating a list of files that I may want to open using the associated Windows program. Some are standard Office files but others require proprietary analysis programs. All have Windows associations such that I can double click on the file name in the Windows file manager and launch the appropriate program. I would like to mimic this behavior within my LV program but without coding a case for each file extension, some of which I may not anticipate now.

There are some problems with that VI. I have one user that I had to track a problem down with trying to open a PDF file. Their registry key HKEY_CLASSES_ROOT\.pdf was read in with a value of "AcroExch.Document " (with a lot of spaces after it), which prevented this VI from finding the next key (AcroExch.Document\shell\open\command) which identifies the path to Adobe Acrobat. Instead of getting the path to Adobe Acrobat, I got back "Adobe Acrobat 7.0 Document" as the path (see attached error).
I checked the key with the Windows registry editor, and it did NOT show the extra spaces. However, just opening the key and selecting OK (without making changes) was enough to clear the problem.
Not sure if this problem is with the registry keys that Adobe Acrobat created when it was installed or upgraded (the user was on version 9.0, but there are older versions on that machine, too), or if the problem was with the LabVIEW registry key readers in Open a Document on Disk.vi.
Message Edited by Joe Gerhardstein on 05-13-2009 03:13 PM
Message Edited by Joe Gerhardstein on 05-13-2009 03:17 PM
Joe Gerhardstein
Averna Test Systems
Certified LabVIEW Architect
http://www.averna.com
Attachments:
Open a Document.jpg ‏82 KB

How to open MAc os after windows installed

Similar Messages

Maybe you are looking for