How to Open Multiple Files into One Image with a Format Plug-in?

Basic overview question:
I'm interested in creating a format plug-in that will open multiple image files and combine them, then provide one image to Photoshop for further work.
1. Can an .8bi plug-in receive notification of multiple files to be opened? (Not unlike Camera Raw). Or does one absolutely need to use an .8ba Import plug-in to do this? I would prefer .8bi.
2. Assuming yes, could the latter parts of the plug-in interface be used to open just one combined image?
Thanks!
-Noel

1) An import plugin (8bi) doesn't get file information - it has to provide it's own open dialog. Only a file format plugin gets a file, but only one at a time. (ACR has some special magic)
You might want to take a look at the PhotoMerge and MergeToHDR setups with a script driving a plugin.

Similar Messages

How to merge multiple files into one pdf

I would like help with this task. If I could do this for free I woul actually be more likely to follow advice. Many thanks

Hi Lauravill,
The free Adobe Reader cannot help you with the merging job. If you have Acrobat Reader then you can merge files into one pdf with the following steps-
Within Acrobat XI, select File > Create > Combine Files into a Single PDF.
Click Add Files and select the files you want to add.
Click, drag, and drop to reorder the files and pages. Double-click on a file to expand and rearrange individual pages. Press the Delete key to remove unwanted content.
When finished arranging the files, click Combine Files.
Select File > Save As > PDF.
Name your PDF file and click Save.
Let us know if you face any problemwith this or need extra support.
Thanks
-Satyadev

How to open multiple files on one layer

hi there,
I have a fairly simple problem and I browsed through all the different FAQs to find it but nothing came up. In any case, my question is how do you select multiple files (in this case PNGs) and open them as individual layers on one file instead of opening them as separate files?
easy huh? I'm a noob ok.
thanks
-Chance

Russell Brown has a CS4 version of his services.
As Wolf points out, if you have CS4 then you already have access to a script that will also do what you want. I happened to notice though, that the built-in script and the Russell Brown script work slightly differently. The RB script will crop all images based on the first one loaded. The built-in script will apparently use the dimensions of the largest image.
It was a nit but I thought the title of the thread would be more accurate as "Help opening multiple images as layers in a single file" or something like that.

HT4059 I'm trying to organize my PDFs in iBooks on my ipad2 and I can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

How do I bundle files into one folder on my mac OS X version 10.6.8?. I do not see launchpad on my desktop.

How do I bundle files into one folder on my mac OS X version 10.6.8? I don't have an icon for Launchpad on my desktop.

Put the files you want on the first page into the folder, and then use subfolders for the subsequent pages. If the process you saw involved Launchpad on a newer OS, it can’t be done on 10.6.8.
(108795)

Scanning multiple pages into one document with an automatic document feeder

when using automatic document feeder to scan in multiple pages - using the Image Capture app, this process does not work for more than 2 pages. However works perfectly in PC environment.
Using a MacBook Pro with 10.8.4 and a Lexmark Interpret 405S All In One Scanner.
Is there any other all in one device that can perform this function in a Mac environment?
Please advise.

Hi @FentyFly ,
I see by your post that you would like to know how to scan multiple pages into one file. I would like to help you out today.
From the HP Scan Software, click on the link for Advanced Settings, then uncheck Create a separate file for each scanned page.
Here is a URL for how to scan and change the settings. Just select your operating system.
Scan.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

How to combine .wmv files into one file???

Hello Apple World,
Can someone tell me a software that will allow me to combine ".wmv" files into one? I have several files that I need to combine then add music to. VERY simple with several software packages frow Windows pc's, but I'm struggling with this since getting my first mac! PLEASE help.

Hi:
How can I edit MPEG or convert DVD or MPEG to DV
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
Matti says it better than any of us:
how/where you can join clips with Streamclip
Also MPEG Streamclip guide explains it.
MPEG Streamclip can join similar MPEG files: The joined files must have the same PIDs, the same start codes, and the same audio/video properties (that is, they must come from the same source or channel).
Using "Convert to MPEG" before joining the files can be helpful, because it changes PIDs and start codes to a default value. The preferred method to join streams is to Copy one stream in MPEG Streamclip, open another stream and Paste it there. This method checks that the joined streams indeed are compatible. Another method is to put the MPEGs in the same folder, and rename them so that they sort as desired in list view. Then select them via MPEG Streamclip's "File/Open Files..." dialog box (Shift- or Command-click to select multiple MPEGs). Then choose "Edit/Fix Timecode Breaks". After this MPEG Streamclip should report the combined length of all MPEGs (check the Log Window if you want to know whether any timecode breaks were found). Then choose "File/Convert to MPEG... or /Save As..." to save them in a single file. If the video transition between two files looks bad, you can use the Cut command to improve it. You can join very different and incompatible MPEGs with this latter method so the end result is not guaranteed to work.
MPEG Streamclip can also edit MPEG files. Just set In/Out points (with I/O keys), Cut unwanted material off and choose "File/Convert to MPEG...". You can also Cut/Copy selections to other parts of the same stream or open another compatible stream and Paste it there. Shift-dragging the playhead can also be used to define a selection. Option + arrow keys jump to the beginning/end or In/Out points. You can use the Trim-command to more closely see a part of the video before cutting, then choose Revert Trimming to see all material. JKL-keys can be used to enable fast forward or reverse playing. The scroll wheel works also; with the Option key it scrolls 1 second per click. See the manual for more details on how to jump in single frame, GOP, 1 second, 10 second or 1 minute chunks when searching a specific spot in the video.
Editing and trimming can be accurate only if In and Out are both on keyframes because MPEG Streamclip edits to the GOP, not to the frame. For DVD and (XS)VCD the maximum GOP size is PAL 15 and NTSC 18 frames, so the editing accuracy can be up to about 0.6 seconds. You can advance to the previous or next keyframe (i.e. I-frame, the beginning of each GOP or Group Of Pictures) with the Up/Down arrow keys -- you can also use the Edit/Go to Keyframe command to see where the In and Out points really are when editing (the In point is included in the selection, the Out point is not included). Shift + Up/Down arrow keys allow fine-tuning the selection to the GOP.
Sue

Open Multiple files in One go......

Hi all,
I need to open multiple file jpg files present at a particular location in one go. I am developing the application in ADF and i used the following code in for loop
response[i] = (HttpServletResponse) fctx.getExternalContext().getResponse();
// file should be downloaded without display
response.setContentType("application/x-download");
response[i].setHeader("Content-Disposition", "attachement; filename=\"document "+listFiles[i].substring(0,(listFiles[i].length()-4))+".bmp\"");
but it opens only one file(the last one of the for loop). Finally i evn tried Runtime.getruntime again in a for loop, still it didnt work.
I got an option from somewhere sugggesting to use firebox viewer. I browsed for the software, but found thatfirebox can open multiple url's in one go and did'nt get any relevant help regarding firebox viewer.
Is Firebox viewer a component of firebox???If so how to use it to open multiple jpg files???
How to integrate this firebox viewer with ADF???
Any help???
Regards,
Amitt

No, I have idea about FifreFox Brower, its about FireFox viewer, may be a plug in or component of Browser(Even I am not sure whether there is any component like viewer or not???),
But the key is that ki i want to open a multiple jpg files in one go. Whether using FireFox Viewer or something else it does'nt matter.
Any suggestion????
Amitt

How to collect InDesign files into one InDesign file

Hello,
i need to collect a bunch of pages spread over a dozen of files into one file. The person who worked my source files found it convenient to separate a catalogue into chapters, making an individual file for each one of them. For some reason i need to make one single file of those chapters. How do i do this?
Thanks in advance!

You should ask in InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How to get multiple elements into one element as multiple occurences

I can't figure out how to do this. I have an input message that has multiple elements and I need to take those elements and copy them into one element with each new element going in as a new occurence or instance. For example
I have this input under one parent node.
element1
element2
element3
element4
and this is the output I need
Node
Element1[0]
Element2[1]
Element3[2]
Element4[3]
The input XML looks like this
Payload
Element1
Element2
Element3
and the output XML needs to look like this
Payload
Element.
Thanks in advance

How about this.
Input XML:
<Row>
          <Column1>TOTAL</Column1>
          <Column_9_2_2008>900</Column_9_2_2008>
          <Column_9_2_20082>890</Column_9_2_20082>
          <Column_9_3_2008>52</Column_9_3_2008>
          <Column_9_4_2008>0</Column_9_4_2008>
          <Column_9_4_20082>0</Column_9_4_20082>
          <Column_9_5_2008>0</Column_9_5_2008>
          <Column_9_5_20082>0</Column_9_5_20082>
          <Column_9_8_2008>0</Column_9_8_2008>
          <Column_9_8_20082>0</Column_9_8_20082>
          <Column_9_9_2008>0</Column_9_9_2008>
          <Column_9_9_20082>0</Column_9_9_20082>
          <Column_9_10_2008>0</Column_9_10_2008>
          <Column_9_10_20082>0</Column_9_10_20082>
          <Column_9_11_2008>0</Column_9_11_2008>
          <Column_9_11_20082>0</Column_9_11_20082>
          <Column_9_12_2008>0</Column_9_12_2008>
          <Column_9_12_20082>0</Column_9_12_20082>
          <Column_9_15_2008>0</Column_9_15_2008>
          <Column_9_15_20082>0</Column_9_15_20082>
          <Column_9_16_2008>0</Column_9_16_2008>
          <Column_9_16_20082>0</Column_9_16_20082>
          <Column_9_17_2008>0</Column_9_17_2008>
          <Column_9_17_20082>0</Column_9_17_20082>
          <Column_9_18_2008>0</Column_9_18_2008>
          <Column_9_18_20082>0</Column_9_18_20082>
          <Column_9_19_2008>0</Column_9_19_2008>
          <Column_9_19_20082>0</Column_9_19_20082>
          <Column_9_22_2008>0</Column_9_22_2008>
          <Column_9_22_20082>0</Column_9_22_20082>
          <Column_9_23_2008>0</Column_9_23_2008>
          <Column_9_23_20082>0</Column_9_23_20082>
          <Column_9_24_2008>0</Column_9_24_2008>
          <Column_9_24_20082>0</Column_9_24_20082>
          <Column_9_25_2008>0</Column_9_25_2008>
          <Column_9_25_20082>0</Column_9_25_20082>
          <Column_9_26_2008>0</Column_9_26_2008>
          <Column_9_26_20082>0</Column_9_26_20082>
          <Column_9_29_2008>0</Column_9_29_2008>
          <Column_9_29_20082>0</Column_9_29_20082>
          <Column_9_30_2008>0</Column_9_30_2008>
     </Row>
Output XML:
<Total>
          <Payload>900</Payload>
     </Total>
     <Total>
               <Payload>890</Payload>
     </Total>
     <Total>
               <Payload>52</Payload>
     </Total>

How to concatenate multiple records into one

Hi everybody:
I want to know if exist some way to concat multiple records into one without using cursors. For example, I have a table named "Authors" like this:
Lan|Author
English|Ernest Hemingway
Spanish|Octavio Paz
Spanish|Mario Vargas Llosa
English|Sinclair Lewis
Spanish|Gabriel García Márquez
And I want to get this:
Author
Octavio Paz, Mario Vargas Llosa, Gabriel García Márquez
I have worked with SQL Server and I can do something like this:
CREATE FUNCTION dbo.MyConcat (@lan varchar(10))
RETURNS varchar(5000) AS
BEGIN
declare @retvalue varchar(5000)
set @retvalue=''
select @retvalue = @retvalue + Author +',' from Authors where lan = @lan
return substring(@retvalue,1,len(@retvalue)-1)
END
ie, do not use cursors to concatenate records. However, with ORACLE, I have to do someting like this.
FUNCTION MyConcat(P_Lan IN VARCHAR2) RETURN VARCHAR2 IS
v_ret VARCHAR2(4000);
v_element VARCHAR2(4000);
v_cursor sys_refcursor;
BEGIN
OPEN v_cursor FOR SELECT Author FROM Authors where Lan = P_Lan
LOOP
FETCH v_cursor INTO v_elemento;
EXIT WHEN v_cursor%NOTFOUND;
IF v_ret IS NULL THEN
v_ret := v_element;
ELSE
v_ret := v_ret || ', ' || v_element;
END IF;
END LOOP;
RETURN v_ret;
END;
Exist some other way to do this?
Best Regards
Jack

Tks both for answer... I forgot to mention that I am using Oracle 10g. I read about LISTAGG() but this function is available for Oracle 11g release 2.
I wil read about the other techniques than Hoek mention
Best Regards.
Jack

How to combine several files into one?

How to combine several pdf files into one?

Combine Files is a feature of Acrobat Pro. Because Reader Touch does not support the feature (yet), this is not the right forum for the question.
Here's the Acrobat forum for Creating, Editing & Exporting PDFs.
http://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs
You can ask questions and get help from Acrobat experts there. Good luck!

How to zip multi files into one zip file in ABAP

hi all:
As you know, ABAP has CL_ABAP_GZIP class to support zip file function. But it only support one file zip. If I want to zip two files into one zip file, how to do it?
thanks.

Hi,
<li>If you know how to zip one file, to zip two files , you can follow the below steps.
DATA:g_zipper     TYPE REF TO cl_abap_zip.
"create our zipper object
CREATE OBJECT g_zipper.
"add 1st file to zip
CALL METHOD g_zipper->add
   EXPORTING
     name    = file_name
     content = content_x.
"add 2nd file to zip
CALL METHOD g_zipper->add
   EXPORTING
     name    = file_name
     content = content_y.
"save zip
CALL METHOD g_zipper->save
   RECEIVING
     zip = zip.
Thanks
Venkat.O

Missing photos when opening multiple files into Photoshop from LR3.2

When I try to open multiple files (8+ maybe) from Lightroom 3.2 to edit in Photoshop CS5, almost always one or two photos does not open. This means I have to manually find out which photos are missing, and then reopen them.
Can anyone help me with this problem??

I have opened as many as 50 from external hard drive with LR 3.2 and Windows XP with no problem.
It takes a long time to bring in this many if they are 100MB tiffs. I had to go have coffee and come back later.
Are you sure you waited until it was finished?

How to Open Multiple Files into One Image with a Format Plug-in?

Similar Messages

Maybe you are looking for