How to open my project library progress in timeline with FCPX 10.1?

So I've been having a huge problem with FCPX 10.1 and I cannot, for the life of me, figure out even what I'm supposed to ask--much less what the answer is.
So here's the basic problem. I don't know how to open my complete progress of a project library in the timeline. I have 5 projects, and two of them, for some reason unbeknownst to me, I just double click to bring up in the timeline. The other three, however, won't. Let me clarify more. One of the projects is not even showing up in the new 'Projects' sub-menu when selecting my library. The other two are showing up in the 'Projects' sub-menu, but aren't showing as having any content. Their time shows as 0:00. Now for one of the projects I mentioned before (the one that isn't even showing up in the 'Projects' sub-menu,) I know that its editing was saved because I worked on it several different times (having closed and opened FCPx in between) However when I was working on that video, I never removed it from my timeline. So whenever I opened FCPx, my progress it would just automatically pop up in the timeline.
My problem is this: I do not know where to reliably find my progress for my various project libraries and to open them in the timeline every single time.
If you need anymore information from me, please say so. My problem is very simply complex, because I'm just stupid enough with this software to not understand how to ask my question properly.
I worked on a specific project 3 weeks ago and I can't find the progress for it anywhere. I don't want to open specific clips in the timeline. During that project session, I had put all of my clips in the timeline and was editing them in specific ways that required them all being on the timeline so I could get a very specific and seamless effect. How do I get all of that progress into the timeline?

Okay so if I go into the sub-menu that pops up that contains all of my video and audio clips and right click the FIRST clip in my entire progress and load that into timeline, all of my progress is loaded as well--why is this the case? And why does the project itself show as having 00:00:00 progress in it?

Similar Messages

Trying to open project. FCP says the project ( that previously opened fine) is unreadable. Any suggestions as to how to open the project?

Can not open a project on FCP which was previously able to be opened ( just an hour ago)..says project is "unreadable" - any suggestions as to how to open this project?

That's fine! (Even if troubled...)
No, I know nothing of Magic Bullet...But they do:
http://forums.creativecow.net/cgi-bin/newreadpost.cgi?forumid=138&postid=855316
http://www.kenstone.net/fcphomepage/review_magic_bullet_editorssaraceno.html
and finally:
http://www.redgiantsoftware.com/
Hope these help!

Firefox does not know how to open this address because the protocol (Sims3) with any program connects

Firefox does not know how to open this address because the protocol (Sims3) with any program connects
can you help me plz

Was the message sent from Microsoft Outlook? When you embed an image in a message in Outlook (at least up to version 2003), it creates a hidden attachment for the image and then inserts a "cid" reference to it. If the attachment gets stripped for any reason then the "cid" reference is useless: Outlook does not store the original URL or path to the image.
Edit: By the way, which webmail site has this problem?

Hi i bought phototshop elements last night and i dont know how to open it and i got an email with my

hi i bought phototshop elements last night and i dont know how to open it and i got an email with my order number and its not working and its not working to track it how can i open my photoshop

It will be wherever you put it.

Help.....How to Open a Project in WSAD..............

Hi Everybody,
I am new to WSAD 4...
I created a J2EE project.
My program is located in
C:\Program Files\IBM\Application Developer\workspace
Can someone Please tell me how can i open this project in WSAD.
I searched in help, but no help there..
I would appreciate if someone who used WSAD and tell me in simple steps how to open i would greatly appreciate.
regars,
kemsho.

Windows -> WorkBench

How to open another iphoto library for another user on the same account.

i have two users on the same imac that are actvie users of iphoto. how do i open a new library for the second user since the admin user has automatically gotten their own?

On the same account?
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
The same keystroke on launch will allow you to choose which Library to open.

Can't figure out how to open multiple projects in imovie

I want to copy clips from one project into another. I've read you simply open the two projects and drag clips from one to the other. I may be missing something quite basic, but I cannot figure out how to get two projects open at once. If I open from the project list, I can only choose one. What am I missing????

Open the project that you want to take video from, select the frames that you want to include in your other project, and Edit > Copy (or Command-C). Return to your Projects list, select the project you want to add the frames to, move the playhead to the point where you want the frames to be inserted, and Edit > Paste (Command-V).

How to open the project?

how to open a src folder to a new project in jbuilder6?
thanks in advanced

in jbuilder there is a section about the source
(something about default & test) but i guess im doing
something wrong because its not working....
does anyone can explain to me how to do that (in
jbuilder or even j++)??Is reading the manual or help files too difficult?

How to open CS5 project in CS3

Hi All,
How can I open CS5 project in CS3?
Thanks
Shaul

In theory you can't.
Premiere is not downwards compatible.
Some have opened CS4 in CS3 or CS5 in CS4 with non or basis effects.
But you can always give it a try, make sure you have a backup

While working on FCPX project, power failed. Power on, restarted, opened FC, Project Library shows blank icon, no clips. Click on icon, nothing happens. Haven't done back-up. Can project be recovered?

While working on a FXPX project, there was a power failure. Power back on, restarted FCPX, project name in Project Library is a blank icon, nothing happens when I click on it. Believing back ups were automatic and continuous, I made no back up. Can the project be recovered?

Years of fine internet use via WIFI then randomly it starts dropping then one day (weeks later) it is no longer accessible at all and even saying "No hardware installed" when I click on WIFI icon at the top right on screen. Here is how I finally fixed it!:
For six months I wallowed in this problem and had to connect my macbook pro to the internet via ethernet cable which as you can image was very restrictive :/
I have had numerous laptop technicans befuddled by this WIFI problem and most concluding with how my WIFI card must be broken and that I will need to buy a new one. The last suggestion I had on the matter was to buy a USB wifi dongle.
So I ended up buying this one, http://www.asus.com/nz/Networking/USBN10_NANO/Unfortunately my macbook pro didn't want to read the install disc and it didn't autorun so it didn't work. After reading more forums I saw that you could download the program from the net and sure enough it worked.. BUT STRANGER when I took the USB dongle out the WIFI was still working!! The program appears to have reminded my four year old macbook pro that it is indeed WIFI capable.
So to find this miraculous program its located herehttp://www.asus.com/nz/Networking/USBN10_NANO/HelpDesk_Download/
Same link as above just under SUPPORT>Driver&Tools
You then click on a file when its downloaded and a file called MAC will appear, then click on install. Within 5 minutes you should have your WIFI back. My macbook pro crashed again today but without having to get the shortest ethernet cable you've ever seen out again - I was able to install the program again and WIFI was up and running once more. Moral of the story - didn't need to spend any money to fix this and not even using the USB dongle.
So happy!! Hope it works for you too!
This also worked on a MacBook that lost its WIFI when a user accounts password was changed and the keychain password wasn't known to them - another random way to lose WIFI apparently

How can I open a project that has been created with Mercury Playback Engine GPU Acceleration software, on my trial version of Premier Pro CC?

Hi,
I'm working with a colleague who is using Mercury Playback Engine GPU Acceleration software on his PC version of Premier Pro CC. I am using a mac and have a trial version of Premier Pro CC. When I try to open a project file that he has sent me I get an error message-
"Missing renderer: This project was last used with Mercury Playback Engine GPU Acceleration (CUDA), which is either not available or not certified on this system. Mercury Playback Engine Software Only will be used."
When I click OK and locate the files I get a message saying "File format not supported".
Can anyone tell me what to do so that we can share project files?
Many thanks,
Jessie

Shouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project?

How to open a project FCP 7 in FCP 4.5?

I can't open a project (i've made in fcp 7) in fcp 4.5. I've tried to make an XML-document (all five available options), but it doesn't work.
Anyone an idea?
Thanks!

Welcome to the forum!
If memory serves me correct it should be XML version 1. Did you highlight what you want to export in the Browser and choose File>Export>XML?
You are trying to open with FCP 4.5 not FCP 4 correct?
What do you need to go to 4.5 for? If you are working in a codec that isn't supported by FCP 4.5 then you will have an issue. What codec are you working with?

How to open a project

I just downloaded Java Wireless Toolkit 2.5.1 CLDC, and everything went alright except, I can not open a project. I tried by clicking the 'open project' icon and by selecting the open project from the file menu.
Am I missing something or do I have to install anything else ?
bytheway, i'm using Java version: 1.5.0_02
thanks in advance
The Justin

I am also having problems. I click on both the toolbar "open project" buttons and file->open project and nothing happens at all. I've installed the kit directly under the C drive (so no spaces in the path), and I've done this on both my laptop and desktop. I've already created the project and compiled/ran it fine. I then can't create the project again because I get a "project already named blah" error. This is getting annoying... Any suggestions?
Message was edited by:
kirami

How to Import PPro project into Current PPro Timeline?

I can import a prproj file into my current project. If I just DRAG it to the timeline it becomes nested without any individual files or transitions. If I double click the sequence, a new sequence opens up with all the files and transitions. But I simply want the entire sequence to appear on my current timeline with all the files and transitions in tact. How?

I fear that something is being lost somewhere. All of the suggestions work as I would want them to. If they are not, either we're all not clear on exactly what the OP wants, or there is something in the OP's workflow, that is getting in the way.
As I edit my "chapters" AS individual Sequences, the first method works perfectly. If I have a special need to get that material into an existing Sequence, the second method, Copy/Paste, works perfectly too. If there are extenuating circumstances, then Jeff's Track-by-Track works a treat.
Got to be something that we're all missing, or that the OP is missing. More more details might help.
Good luck,
Hunt

How to open a report stored in the CMS with the RDC ?

Hello,
With CRXIR2, reports can be stored in the CMS.
Does anybody knows how to open such a report with the RDC (version 11.5) ?
I really need to use the RDC because I have to save subreports on HDD
and it is unavailable with the RAS SDK (neither Java nor .Net).
Thank you for your help.
Alain

Hi Don,
Thanks for your answer,
Why saving subreports ?
- orthogonality reasons... we can import them, why c'ant we do the opposite?
- consitency reasons... we should be able to do the same as we do with the designer, (why this option is available in the Designer ?)
Furthermore, the job is already done in Crystal, it should not be so difficult to port it to the RAS.
- regression reasons... this is something we could do in the past (from Delphi, with the RDC), now the RDC is gone....
Now I will tell you my personal reason:
We have huge reports (about 30 subreports), based on huge business views.
As a result, just loading the report (openClientDocument) takes more than one minute.
In a production environment the custommers do not want to accept that.
So:
- we keep the business views at design time because it's a requirement
- Once the report designed I try to cut the BusinessViews and replace them by SQL commands
I suppose you know the RAS to be aware that it can't do that by far.
I wrote a program to disconnect all the ReportObjects from the BusinessView, it's Ok
Now I need to remove the BusinessViews from the report and all subreports.
I can automate CrystalReports for it, but only at the report level...
This is my particuliar reason for saving subreports.
Am I the only one to have this request ?
If you want, of course, I'm ready to help developing those missing things in the RAS.
I'm serious, tell me if you are interested.
Thank you again and best regards
Alain

How to open my project library progress in timeline with FCPX 10.1?

Similar Messages

Maybe you are looking for