How to open object, when I use SMW0
Hi, Expert:
when I use to tcode SMW0. I can see some template object Z_CUST_CREATION_NOTIFICATION_ENGLISH. how to open this object.
Thanks,
One way is .. select that object and push the Export (Shift+F7)... and save it to local disk and view it.
Regards,
Naimesh Patel
Similar Messages
-
I have downloaded the 30 day free trial using Adobe Download Assistant but I do not know how to open it and start using it.
This was so annoying!! It took me a good couple of hours but i figured it out, you need to do the following: Go to the folder where you saved the download (in my case i saved it in My Downloads) -> click on 'Adobe Photoshop Elements 12' -> click on 'PSE 12' -> click on 'Setup' (select the icon which is a box with a shield) -> follow instructions and....voila! You will need to restart when it suggests so save anything else first, then when it reboots you should see the icon on your desktop....hpe this helps!
-
How do i sing out from hotmail/ how to open camera when i chat with messenger
how to i sing out from hotmail????????... it says coudn't sign out because web brower cookie........
how to open camera when i chat using messenger?????????Thanks for your help - I am frustrated that I can't figure this out. I am not getting any error messages but here is what happes. I plug in the IPAD and it shows up in the left hand colum in itunes but it does not sync to ITUNES. When I click on the IPAD, it shows me the tabs but that nothing is actually on the IPAD hard drive. When I click on transfer files manually, the "apply" button does not work. When I turn off the transfer files, the apply button still does not work. So next, I tried the music button, and it does ask whether to "apply" but when I click on apply, nothing happens. Under the music tab, it only shows music that I purchased from ITUNES but not all the music that I purchased on CD and transfered to ITUNES.
-
How to open a pdf file using OPEN DATASET
Im trying to convert a pdf into binary format. So im trying to read the contents of the pdf into a XSTRING. Using the FM 'SCMS_XSTRING_TO_BINARY' i can convert the XSTRING to binary format.
How to open a pdf file using OPEN DATASET and transfer its contents in a XSTRING variable.
What i've tried is....
DATA: f_name type string value 'C:\rep_output_pdf.pdf',
x1 type xstring,
LT_DATA TYPE STANDARD TABLE OF X255.
OPEN DATASET f_name FOR input IN BINARY MODE.
READ DATASET f_name INTO x1.
CLOSE DATASET f_name.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
BUFFER = x1
TABLES
BINARY_TAB = LT_DATA.
Im getting a short dump .
Short text: The file is not open.
Plz help me out.Hello Rajesh,
You are trying to do use OPEN DATASET with a local file. NOT POSSIBLE
You have to have the file in the app server to use OPEN DATASET.
BR,
Suhas -
How to open Facebook in china using MacBook Pro?
hello, please to resolve on how to open facebook in China using MacBook Pro.
Many thanks to all!You can't. Want more GPU? You'll have to purchase a new computer.
-
How to open a PDF file using NWDS or VC
Hi Frndz...
As per my requirment i need to open a PDF file on browser which PDFs are reside on R/3 and in my case EP server is on UNIX usinig either NWDS or VC ....
Thanks in Advance
Regards
Rajesh
09903726944hi,
can you put your question much more clearly? I couldnt get you properly.
Check out the following links, they may be useful
[How to Create a pdf form Using Web Dynpro - Java;
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/805709cb-ec97-2910-04b8-f3d6303d8d3b]
[Diff - PDF view inside NWDS livecycle designer and when App. is run;
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90e8e837-cc15-2a10-8db1-a87e2d29e9c9]
Regards,
Murthy. -
How To Open PDF Attached file use CLIENT_HOST 11 g forms
How to open pdf file on client side at 11 g forms ?
when i open any attached (PDF )file on client side is not open those file open on server side plz guide me how to open those file on client machine using client host?
thanksWhere is the pdf you are trying to open? Is it on the server or the client? If the file is stored on the server then you can access it using WEB.SHOW_DOCUMENT assuming it is stored in a place that has a virtual mapping. For example:
WEB.SHOW_DOCUMENT ('http://server/someLocation/file.pdf','_blank');If the file is on the client then you need to configure your application to use WebUtil. Then you can do what Francois suggested. -
How to open a doc file using jsp Anchor tag
when i am trying to open a doc file using a jsp it is opening with out proper alignment.
how to open a doc file with proper alignment using Anchor Tag in JSp Page
Hello!
Does some one of you had open a MS word file (.doc) in Java search for a token like [aToken] replace it with another text and then feed it to a stream of save it?
I want to build a servlet to open a well formatted and rich on media (images) ms word document search for tokens and replace them with information form a web form.
Any Ideas?
Thank you in advanced. -
Hi SDN's,
Can u tell me how to get headers when we download data to excel with using (we are using DBF as file type in the following method )
CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
(We can't use GUI_DOWNLOAD)
Thanks in advance..
BRHi,
I m giving u a bdc code i hope ur prob ll be solved.
*& Report ZDTK_BDC_LT01
*& PROGRAME TITLE : LT01
*& AUTHOR : D TARUN KUMAR
*& MM CONSULTANT : Mr. MRINMOYE CHAKRABORTY
*& REQUEST NO. : RD1K901995
*& TRANSACTION ID : ZLT01
*& PACKAGE : ZTARUN
*& DESCRIPTION : BDC REPORT TO UPLOAD INITIAL STOCK POSTING AND
*& STORAGE BINS THROUGH LT01.
REPORT ZDTK_BDC_LT01
no standard page heading line-size 255.
TYPE-POOLS: TRUXS.
STRUCTURE DECLARATION
TYPES : BEGIN OF TY_UPLOAD,
LGNUM(3),
BETYP(1),
BENUM(10),
BWLVS(3),
MATNR(18),
BISMT(18),
ANFME(16),
WERKS(4),
LGORT(4),
CHARG(10),
LETYP(10),
VLTYP(3),
VLBER(3),
VLPLA(10),
VLQNR(10),
NLTYP(3),
NLBER(3),
NLPLA(10),
NLQNR(10),
END OF TY_UPLOAD.
INTERNALTABLE & WORKAREA DECLARATION
DATA : T_UPLOAD TYPE STANDARD TABLE OF TY_UPLOAD,
T_BDCDATA TYPE STANDARD TABLE OF BDCDATA,
T_BDCMSGCOLL TYPE STANDARD TABLE OF BDCMSGCOLL,
W_UPLOAD TYPE TY_UPLOAD,
W_BDCDATA TYPE BDCDATA,
W_BDCMSGCOLL TYPE BDCMSGCOLL,
GLOBLE DECLARATION
G_FLNAME TYPE STRING,
G_MESSAGE(70) TYPE C,
IT_RAW TYPE TRUXS_T_TEXT_DATA,
GLOBLE DECLARATION
WA_OPT TYPE CTU_PARAMS.
WA_OPT-UPDMODE = 'A'.
WA_OPT-DEFSIZE = 'X'.
WA_OPT-DISMODE = 'A'.
SLECTION SCREEN DECLARATION
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 2.
PARAMETER : P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM GET_FILENAME.
START-OF-SELECTION.
PERFORM UPLOAD_DATA.
*PERFORM GET_FINAL.
*PERFORM GET_MIGO.
PERFORM SESSION.
*PERFORM TEST.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR W_BDCDATA.
W_BDCDATA-PROGRAM = PROGRAM.
W_BDCDATA-DYNPRO = DYNPRO.
W_BDCDATA-DYNBEGIN = 'X'.
APPEND W_BDCDATA TO T_BDCDATA.
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR W_BDCDATA.
W_BDCDATA-FNAM = FNAM.
W_BDCDATA-FVAL = FVAL.
APPEND W_BDCDATA TO T_BDCDATA.
ENDIF.
ENDFORM.
*& Form GET_FILENAME
TEXT
FORM GET_FILENAME .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = P_FILE
ENDFORM. " GET_FILENAME
*& Form UPLOAD_DATA
text
form UPLOAD_DATA .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER = 'X'
I_TAB_RAW_DATA = IT_RAW
I_FILENAME = P_FILE "WORK TABLE
TABLES
I_TAB_CONVERTED_DATA = T_UPLOAD[] "ACTUAL DATA
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " UPLOAD_DATA
*& Form SESSION
text
FORM SESSION .
*sort t_upload by bismt.
LOOP AT T_UPLOAD INTO W_UPLOAD.
REFRESH T_BDCDATA.
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = W_UPLOAD-CHARG
IMPORTING
OUTPUT = W_UPLOAD-CHARG .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = W_UPLOAD-VLBER
IMPORTING
OUTPUT = W_UPLOAD-VLBER .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = W_UPLOAD-NLTYP
IMPORTING
OUTPUT = W_UPLOAD-NLTYP .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = W_UPLOAD-NLBER
IMPORTING
OUTPUT = W_UPLOAD-NLBER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = W_UPLOAD-CHARG
IMPORTING
OUTPUT = W_UPLOAD-CHARG .
DATA : BWLVS(3),
LGORT(4),
WERKS(4),
CHARG(10),
LETYP(10),
VLTYP(3),
VLBER(3),
VLPLA(10),
VLQNR(10),
NLTYP(3),
NLBER(3),
NLQNR(10).
DATA : W_MATNR(18).
*SELECT SINGLE MATNR FROM MARA INTO W_MATNR
WHERE BISMT = W_UPLOAD-BISMT.
BWLVS = '999'.
LGORT = '3500'.
WERKS = '1030'.
LETYP = 'E1'.
VLTYP = '998'.
VLBER = '001'.
VLPLA = 'AUFNAHME'.
NLTYP = '354'. "(packaging material)
*NLTYP = '353'. "(spareparts material)
NLBER = '001'.
*include bdcrecx1.
*start-of-selection.
*perform open_group.
perform bdc_dynpro using 'SAPML03T' '0101'.
perform bdc_field using 'BDC_CURSOR'
'LTAP-CHARG'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LTAK-LGNUM'
W_UPLOAD-LGNUM. "'350'.
perform bdc_field using 'LTAK-BENUM'
W_UPLOAD-BENUM. "'1000000000'.
perform bdc_field using 'LTAK-BETYP'
W_UPLOAD-BETYP. "'P'.
perform bdc_field using 'LTAK-BWLVS' BWLVS. "'999'.
perform bdc_field using 'LTAP-MATNR'
W_upload-MATNR. "'40000009'.
perform bdc_field using 'RL03T-ANFME'
W_UPLOAD-ANFME. "'1,000'.
perform bdc_field using 'LTAP-WERKS' WERKS. "'1030'.
perform bdc_field using 'LTAP-CHARG'
w_upload-charg.
perform bdc_dynpro using 'SAPML03T' '0102'.
perform bdc_field using 'BDC_CURSOR'
'LTAP-NLPLA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RL03T-ANFME'
W_UPLOAD-ANFME. "'1,000'.
*perform bdc_field using 'LTAP-ALTME'
'KG'.
perform bdc_field using 'LTAP-LETYP' LETYP. "'E1'.
*perform bdc_field using 'LTAP-CHARG' W_UPLOAD-CHARG. "'0000000101'.
perform bdc_field using 'LTAP-VLTYP' VLTYP. "'998'.
perform bdc_field using 'LTAP-VLBER' VLBER. "'001'.
perform bdc_field using 'LTAP-VLPLA' VLPLA. "'AUFNAHME'.
perform bdc_field using 'LTAP-NLTYP'
W_UPLOAD-NLTYP. "'351'.
perform bdc_field using 'LTAP-NLBER' NLBER. "'001'.
perform bdc_field using 'LTAP-NLPLA'
W_UPLOAD-NLPLA. "'01 00 01'.
*perform bdc_transaction using 'LT01'.
*perform close_group.
CALL TRANSACTION 'LT01' USING T_BDCDATA
MODE 'A'
UPDATE 'A'
OPTIONS FROM WA_OPT
MESSAGES INTO T_BDCMSGCOLL.
IF SY-SUBRC <> 0.
READ TABLE T_BDCMSGCOLL INTO W_BDCMSGCOLL INDEX 1.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = 'EN'
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = G_MESSAGE
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
WRITE : / W_upload-matnr ,'-----' , G_MESSAGE.
REFRESH T_BDCMSGCOLL.
ENDIF.
ENDIF.
*clear : w_matnr, w_upload.
ENDLOOP.
ENDFORM. " SESSION -
How to open a htmlwebpage by using pl/sql?
my problem is how to open/invoke a existing webpage by using pl/sql.Because I want to do a authentication function,and write a procedure to varify the user ID and password.If they are valid,a welcome webpage can display,otherwise a eror message/webpage will be invoked.
My question is how to display the error message to the webpage or to open a webpage which display the error message by using pl/sql.I think you may be in the wrong forum, but anyways...
What I think your looking for is the htp.print('insert html here'); function. It's plsql, and writes out html to the web server that calls it.
if you search for htp.print you should find loads of examples.
hope this helps.
Merv. -
How to open illustrator file (.ai) using Indesign and save it as XML
I know how to open a Illustrator file (.ai) in Indesign.
It would be like :
1 ) Save your Illustrator file as AI. This Native format is most compatible with InDesign.
2 ) Go to -> InDesign, click on your document using your Frame Rectangle tool (the one with the X through it).
3 ) Fill in the desired size (can be adjusted later).
5 ) Go to File menu > Place.
6 ) Find and select the Illustrator file in the window that opens.
7 ) Click the Open button.
Adjust size, & position of your image using the Direct Selection tool (white arrow), and the cropping with the Seclection tool (black arrow.
Now I want to save this file as XML.
After that, I say
1 ) File -> Export
But this file saves as XML only shows he the root element nothing else.
Every time , this shows like
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<Root></Root>
Nothing is there as contents.
Can anyone let me know, is it possible to store .AI file as XML.
My requirement is simple, i want to store the .ai file as XML.
Some how I am using Indesign to do so . Can any body help.
Thanks,Copy and paste is again seems same as 'Place the file' , it wouldn't help again.
Copy( from Illustrator) and paste( it in Indesign) and later saving\exporting as XML again create the same the XML file with no data . Just a XML structure,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<Root />
RRegarding using the FXG and SVG file .. saving these formats to XML does not shows the Co-ordinates in XML formats.
I do I would like to have the coordinates (x,y) so that later on , if required I can change the coordinates and display the Image or Text in the file. As this is a requirement for business card.
A -
How to change color when I using delete button?
Hi experts,
When I using delete button on input schedule before enter any data, it display the same color on the data range, how can fix the color after using delete button? or is it a formatting problem?
BPC ver : 7.5 sp3 for NW
best regard
Evans.Evans,
Is delete button custom made? i think it is possible with Formatting Range.
check the below for advanced formatting.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70573b01-657a-2b10-a2b2-ec54bb0a9c8c?quicklink=index&overridelayout=true
I think you need use CHANGED as value for CRITERIA. I don't think NW doesn't support CHANGED value for CRITERIA i guess.
Thanks,
Ben. -
Hi Gurus,
Can any ony explain how to create the object related messages using add_message method of cl_bsp_wd_message_service?
Thanks,
Murali.Hi Murali,
Check the below code .. hope it helps..
DATA lr_msg_service TYPE REF TO cl_bsp_wd_message_service.
DATA lr_exception TYPE REF TO cx_root.
DATA lr_rtti TYPE REF TO cl_abap_objectdescr.
DATA lv_msg_type TYPE symsgty.
DATA lv_msg_id TYPE symsgid.
DATA lv_msg_number TYPE symsgno.
DATA lv_msg_v1 TYPE symsgv.
DATA lv_msg_v2 TYPE symsgv.
DATA lv_msg_v3 TYPE symsgv.
DATA lv_msg_v4 TYPE symsgv.
DATA lv_msg_level TYPE bsp_wd_message_level.
DATA lr_verification TYPE REF TO if_bsp_wd_message_handler."#EC NEEDED
DATA lv_important_info TYPE abap_bool.
DATA lv_exc_prog_name TYPE syrepid.
DATA lv_exc_incl_name TYPE syrepid.
DATA lv_exc_src_line TYPE i.
lr_exception = ir_exception.
drill down to first exception
WHILE lr_exception->previous IS BOUND.
lr_exception = lr_exception->previous.
ENDWHILE.
lr_rtti ?= cl_abap_typedescr=>describe_by_object_ref( p_object_ref = lr_exception ).
lr_exception->get_source_position( IMPORTING program_name = lv_exc_prog_name
include_name = lv_exc_incl_name
source_line = lv_exc_src_line ).
prepare message
lr_msg_service = cl_bsp_wd_message_service=>get_instance( ).
lv_msg_type = if_genil_message_container=>mt_warning.
lv_msg_id = 'CRM_IC_APPL'.
lv_msg_number = '003'.
lv_msg_v1 = lr_rtti->get_relative_name( ).
lv_msg_v2 = ir_exception->get_text( ).
lv_msg_v3 = lv_exc_incl_name.
lv_msg_v4 = lv_exc_src_line.
lv_msg_level = '9'.
add message to error log
lr_msg_service->add_message(
iv_msg_type = lv_msg_type
iv_msg_id = lv_msg_id
iv_msg_number = lv_msg_number
iv_msg_v1 = lv_msg_v1
iv_msg_v2 = lv_msg_v2
iv_msg_v3 = lv_msg_v3
iv_msg_v4 = lv_msg_v4
iv_msg_level = lv_msg_level
iv_verification = lr_verification
iv_important_info = lv_important_info ).
Regards,
Raghu -
How is payment made when I use Skype to call abroa...
Can someone explain to me how the payment is made when I use skype to call abroad?
This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content.Hi, Brianbarry, and welcome to the Community,
Skype provides two methods of paying for outgoing calls to fixed or mobile numbers: a Skype subscription or Buy Skype credit. Skype-to-Skype calls are always free of charge.
In the case of Skype Credit, the cost of the call is debited from your balance as the call progresses. When you reach the equivalent of "2" in whatever currency your account is set to, the credit will attempt to "top up," or the call will drop. In the case of a subscription, the subscription covers the cost of the outbound calls.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
How to open a web page using HttpConnection class in cs3
Hi all!
Can anyone help me how to open a webpage using HttpConnection class in cs3?
Thanks
Senthil> If any other way to access database? advice me!
Instead of using http, you are better off writing a command line script (that
uses bash or cmd.exe or whatever) that does this and then call that script using
app.system.
The code is much simpler and far easier to test and debug.
-X
Maybe you are looking for
-
Issue with reading a xml file from xsl
Hi, When I am trying to read a xml file from xsl, I am getting unwanted output. Following is the XSL: <?xml version="1.0" encoding="UTF-8" ?> <?oracle-xsl-mapper <!-- SPECIFICATION OF MAP SOURCES AND TARGETS, DO NOT MODIFY. --> <mapSources> <
-
Goods in Transit (GIT) not getting CIFfed to APO
Dear Collegues, I have been trying to CIF Stock from R/3 to APO, in vain. please read the details below and advise: To test the ASN/GIT transfer to APO, we got the Purchase Orders (PO) created in R/3 for a sample of SKUs. After this, we got the deliv
-
I have three machines running weblogic 6.0 in a cluster. One of the machine is an administration server. I wish to set Weblogic as a Windows service on each machine. The problem is managed servers can't start up until the administration server is ful
-
I apologise in advance for having so many questions, but I am considering purchasing an Ipad and these answers will help me to come to a decision on whether to purchase or not and if I purchase whether I need a 4g enabled ipad or wifi only. 1) Is t
-
How can i change billing and profile names?
I want to enroll the iOS Developer Program, the one of the $99... But I'm 15 years old, and don't have an credit card, so, my father had to lend me his. But there at the forms you have to fill, they say the name has to be the same as on the credit ca