How to open port 443?, How to open port 443?

Hey, an online broking software wants connection to my mac. How can i open a special ssl port like 443,
i allrady did the routerconfiguration, how can i change the mac firewall?

afromfrankfurt,
I came here for help on this subject and MAY have an idea why you are still having the problem after turning off the firewall on your Mac. Assuming your router works the same way mine does, you have to do something to create a path between the outside world and your Mac for traffic on port 443. I know there are ways to do this where the computer can dynamically do this but that is not something I have figured out at this point. The ONLY way I know to make it work is to make sure the Mac has the same IP address every time it uses that router and to tell the router to direct traffic coming in from the web to go to the address you have assigned your Mac.
Hopefully someone more knowldegable than I am will speak up and say how to do it dynamically because, if this is a laptop, assigning it a fixed address on your network can create problems when you take it someplace else.
Steven

Similar Messages

  • Firewall in 10.5, how to open ports and how to manage?

    I am pulling my hair out with the new firewall in 10.5. In 10.4 I could just set ports as I liked in the control panel, in 10.5 there is no such thing.
    I need to for example open port 49999 to allow PageSender to function in my network.
    I need to open port 5901 to work with JollyFast VNC, as port 5900 is used by Apple Remote Desktop and the conflict if they both use the same port.
    Some of these ports I need permanent open like 59999 and others for one session and than close again, like 5901. Again in 10.4 I made the rule in the pref pane, ticked the box and Bob was your uncle. Now?
    I would like to be able to see what ports are open and active on the machine. I have no idea as to where I could see this.
    And at the same time I would like to keep the firewall as closed as possible as I am often on line in hotels etc.
    So I need help, is there a manual somewhere someone is aware of? Or do you have any answers?

    The new Application Firewall does not work in the same way as IPFW (the main firewall in 10.4).
    Instead of managing ports, it simply controls the access of applications to any port. Thus, if you want PageSender to receive connections, you simply need to switch the firewall to "Set access for specific services and applications", and then add PageSender to the list, with "Allow incoming connections". When you do this, PageSender will be able to receive connections on any port that it needs to.
    If you don't like this method of controlling connections, you can still use IPFW. Apple has removed the GUI, but you can download a GUI application like [NoobProof|http://www.hanynet.com/noobproof> or [WaterRoof|http://www.hanynet.com/waterroof/index.html], and you can then set access for specific ports.
    There are no problems with using both IPFW and Application Firewall.
    Cheers,
    Rodney

  • How to know whether a file is opened  or not ?

    Hi all,
    How to know whether a file is opened by its editor or not ? File may be any of the type.

    There are platform-dependent commands that tell whether a file (or directory, port etc.) is used by which processes.
    [oracle@izsak ~]$ fuser .
    .:                    9299c
    [oracle@izsak ~]$ ps -p  9299 -f
    UID        PID  PPID  C STIME TTY          TIME CMD
    oracle    9299  9298  0 Apr25 pts/0    00:00:00 -bash
    [oracle@izsak ~]$ ls -l $fn
    -rw-r-----  1 oracle oinstall 111215876 Apr 25 19:05 /opt/oracle/product/AS/10g/R2/opmn/logs/OC4J~ebank~default_island~1
    [oracle@izsak ~]$ fuser $fn
    /opt/oracle/product/AS/10g/R2/opmn/logs/OC4J~ebank~default_island~1:  3746  3747  3748  3749  3750  3751  3752  3753  3754  3755  3756  3758  3761  3762  3765  3767  3769  3770  3771 18638 21605 21743 21744 21745 22140 22143
    [oracle@izsak ~]$ ps -p 3746 -f
    UID        PID  PPID  C STIME TTY          TIME CMD
    oracle    3746 26427  0 Apr23 ?        00:00:01 /opt/oracle/product/AS/10g/R2/jdk/bin/java -server -Djava.security.policy=/opt...

  • How to hardcode username/pwd in the open doc function.

    How to hardcode username/pwd in the open doc function.
    can you please provide the complete opendoc function

    hi,
    Using SDK, logon token can be passed along with OpenDoc URL.
    Sample code is as follows:
    String openDocumentToken() throws SDKException, Unsup
    portedEncodingException
    IEnterpriseSession sess = CrystalEnterprise.getSessionMgr().logon ("username", "password", "<cms>:</port>",
    "secEnterprise");
    String token = sess.getLogonTokenMgr().createLogonToken("",120,100);
    String tokenEncode = URLEncoder.encode(token, "UTF-8");
    return ("http://<server>:<port>/OpenDocument/opendoc/openDocument.jsp?iDocID=Aa6GrrM79cRAmaOSMGoadKI&sID
    Type=CUID&token=" + tokenEncode);
    Regards,
    Vamsee

  • How can I disable Firefox from automatically opening on system startup on my Mac - unchecking the "open at login" does not work?

    We have Firefox 10.o on our Macbook Pro OS X 10.5.8. I prefer using Firefox as my browser but my husband prefers Safari for now because of a long history of bookmarks and saved information he doesn't have time to re-do. He is tired of Firefox automatically opening when we start up the laptop, and even when we uncheck the "open at login" it still opens at login every time. He is about to uninstall it because of this. How can we disable? It does NOT show up in our account on the Mac OS as an application that starts at login, so we can't disable it there.

    For those of you running Windows, I found this on another site. (Unfortunately, not before getting totally disgusted and switching to chrome.)
    1. click start (or the windows flag button at the bottom left) 2. in the "search programs and files" or the RUN dialog box, enter "msconfig.exe" or "msconfig". 3. That should open the system configuration program. 4. click the "Startup" tab at the top of the opened program. 5. Under the "startup item" column, look for Mozilla firefox. 6. uncheck that one. 7. Click OK or apply. 8. click "exit without restart". 9. you're good to go.

  • How to I get new tabs to open to the correct home page?

    When I open new tabs they just go to a Google Search page, which is very frustrating, especially when I open a new tab and try to type in the URL bar but as soon as it finishes loading Google it blanks out what I typed in and goes to the Google site. In other words, "blank" new tabs do not open to the Favorites page or even my home page. They open to Google. How do I change that? In other words, how do I get new tabs to stop opening to Google and start opening to either my home page or the Favorites screen? Thanks!

    You can modify the <b>browser.newtab.url</b> pref on the <b>about:config</b> page and set it to the desired page to open.
    *http://kb.mozillazine.org/about:config
    See also this article about the New Tab page (about:newtab):
    *https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
    If you do not keep changes after a restart or otherwise have problems with preferences, see:
    *http://kb.mozillazine.org/Preferences_not_saved
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

    How do I get a folder to open up in Final Cut Pro version 6.  I'm on a MAC OS X Version 10.6.8.  The movie folders I imported on my desktop from a Lacie Rugged Triple external hard drive.   When I try to import the folder a pop up comes up that says, "ERROR: No translatin templates matching the selected XML file were found.  Unable to import this file."   When I try and drag the folder into Final Cut a pop up comes up that reads "Please choose a translation document file".  What should I do or what am I not doing? 
    Cliff

    YYou should ask this question on the Final Cut Studio forum.

  • I've downloaded the Creative Cloud, once completed the creative cloud window pos up with spinning whell in center then the entire window disapears. How do I get it to remain open so that I can download programs needed.

    I've downloaded the Creative Cloud, once completed the creative cloud window pos up with spinning whell in center then the entire window disapears. How do I get it to remain open so that I can download programs needed

    right click the executable > click 'run as administrator'.

  • Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

    Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

    Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • I am getting this error message when I open Safari.  How do I make it go away?  "Error Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(.  As a precaution, it has not been loaded.  ?

    Error
    When I launch Safari on my MacBook Pro
    Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(.  As a precaution, it has not been loaded.  Please contact the plugin developer for further information.
    I am getting this message when I open Safari.  How do I make it go away?
    Thanks, Ed Williams

    To Remove plug-in
    1.) Open the SplashID desktop app
    2.) Navigate from Menu bar "File" -> "Plugin for Safari" -> "Uninstall".
    I could not find it in either Library/Internet Plug-ins nor ~/Library/Internet Plug-ins as others have suggested.
    Cheers!

  • I have iPhone 4s, and using latest iOS. When I try to open any link from Twitter or Facebook, it goes to open some wrong webpage. My iphone seems to be infected or suffering from some spyware or malware. How can I remove this wrong link opening

    I have iPhone 4s, and using latest iOS. When I try to open any link from Twitter or Facebook, it goes to open some wrong webpage. My iphone seems to be infected or suffering from some spyware or malware. How can I remove this wrong link opening ? Please help me to resolve...

    I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
    Your call of course but IMO a waste of money. Please read this first:
    There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
    https://discussions.apple.com/docs/DOC-2435
    The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
    More useful information can also be found here:
    http://www.reedcorner.net/mmg/

  • My iTunes program is giving me a message that says, "Runtime error" and wont open iTunes. How do I fix this?

    My iTunes program is giving me a message that says, "Runtime error" and wont open iTunes. How do I fix this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • How to clear customer open items by another  customer open item

    Hi Guru's
    I have a problem, we need to assign  and clear the open items of one customer with another customer from same company code. is it possible?
    for eg: I have a customer X whose Debit balance is USD1000 and Cusomer Y is having Credit balance is 1000. Customer Y is agreed to settle the amount to customer X.
    since customers are not related , we dont maintain any relationship in SAP. how do we post and clear the open items?
    please let me know the procedure.
    regs
    kumar

    Hi,
    When the moment you finish choose open item for 1st customer and then you have to press F7 (Charge off diff.) new screen comes then press F6 (Choose Open Items), then enter required data for 2nd customer (such as customer code, doc number, etc). You can post partially, and residually for this clearing posting.
    Good luck.
    -dwih-

  • How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

    How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

    Hi
    Please take a look to this thread Re: Can I refresh the browser rather than open a new tab?

  • Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started. How do I set FF back to open tabs in 1 window

    Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
    There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
    Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
    Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.

    as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...

  • On my mac when i click on pages, a new document doesn't open instantly  but a window with my files open and then  have to click on the left bottom new document in order to open one. How can i have directly a new document when i click on pages icon

    On my mac when i click on pages, a new document doesn't open instantly  but a window with my files open and then  have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon

    How to open an existing Pages document?
    Click Pages icon in the Dock to launch Pages.
    When Pages is open, click File menu in the  Pages menu bar.
    Select “Open”.
    When the select document  dialog box opens up, highlight/select the document and click “Open”
    at the bottom right corner of the dialog box.
    s
    https://support.apple.com/kb/PH15304?locale=en_US

Maybe you are looking for