How to open Port 85 & 37777 for NVR

I recently purchased a security camera system (Q-SEE / QC Series) for my house but the system required to have open ports 85 and 37777 to be able to view the cameras from outside the local network ie: from my computer at work.
Can someone please help me? I'm not a computer savy and I'm having a hard time to be able to accomplish this task.
Thank you in advance

Matt's pointed you in the right direction - ignore the stuff about uPNP, you just need to use AirPort Admin to configure your time capsule - setup port forwarding to forward ports 85 and 37777 to the IP address of your camera.
Use AirPort Utility to access your Time Capsule. Under the Network tab you have the configuration for the network, including port forwarding options:
Click the + button to add a port forwaring rule and add the first public port (e.g. 85) and the IP address of the camera on the LAN that it should be forwarded to:
Here I've created a rule for port 85 - I'm assuming it's using TCP, but if it's using UDP just add the port values into the UDP fields instead (or in addition to). Also set the IP address to your camera's address (which probably isn't 10.0.1.201 as above).
Rinse and repeat for port 37777

Similar Messages

SRP527W - How to open port 491 for Go-Global apps

Hi Guys,
Recently bought a Go-Global to a remote which require to open port tcp 491. I'm using SRP527W, how configure using this devices, I tried using the port forwarding but failed. Need anyone can help thanks.

I have the same request, and have tried the steps written in the post online, but the screen options are not what was explained.
Per the instructions with my IP Camera support, here's what I need to do:
======
First thing you will need to do is make sure that in the network settings of your camera that you have entered the correct gateway and DNS information. The default gateway address is going to be the LAN IP address of your router. The primary DNS address is also going to be the LAN ip address of your router. For the secondary DNS address enter the address 4.2.2.2, save these settings in your camera.
The second thing you will need to do is, you will need to log into your router and forward the port your camera is using (the default port is port 80) to the LAN IP address of your camera. This will be done in the port forwarding section of your router. You may need to contact the manufacturer of your router to have them walk you through these steps.
In order to access your camera, you will need to use the WAN (public) IP address that was provided to you by your ISP. As an example, the URL will look like this, HTTP://65.44.139.2 or if you are using a different port number other than 80, you will have to use the URL with the port number. That URL would look exactly like this, HTTP://65.44.139.2:81
======
I've changed the secondary DNS to 4.2.2.2, but I cannot find how to forward the camers's port to the IP address of the camera....I've set 198.268.1.240 as the camera address.
Can you help?
Thanks,
Kent Tunell

How to open port 8000 (outward)

Can someone please explain how to open port 8000 for streaming Nicecast to my (network) IceCast2 server? Thanks!

If all you are using is the inbuilt firewall then it shouldn't be blocking outward connections.

The access to our new chess hall may be blocked by your local firewall. You would need to reconfigure your firewall to open port 15010 for TCP traffic.

How do I do the following so I can get into my chess program??
The access to our new chess hall may be blocked by your
local firewall. You would need to reconfigure your firewall to open port 15010
for TCP traffic.

This is not really Firefox related.
What you need to do here is to read the firewall manual which usually explains how to create a rule for what you want to do.
If you're using the Windows XP firewall, see this Microsoft article: http://windows.microsoft.com/en-US/windows-vista/Firewall-frequently-asked-questions

Don't know how to open ports

Hello.
Could someone please tell me how to open ports on my LinkSys WRV200 Wireless-G VPN Router.
Thank you.

Open up internet explorer. On the address bar type the numbers 192.168.1.1 (username is admin, password is admin as well). Go to the Firewall tab. Depending on what kind of port opening you want, you either click on the Port Triggering or Port Forwarding subtab.
If you are hosting a certain program or application, use port forwarding. If you are just simply trying to use and access it, use port triggering.

Total Newbee, How to open ports 5198 and 5199 for Amateur Radio software program

I am a Amateur Radio operator using a software program called Echo Link which will enable me to talk to other radio operators around the would through repeaters running this software. I need to open ports 5198 and 5199 in my Airport Time Capsule for this software to work. How do I open these ports? They talk about mapping the ports which I don't understand. Below is a screen shot of an older version of Airport that shows what I want to do.
I tried to do it but it does not work and I can't change the private IP Address. Here is a screen shot of what I tried to do below. Thanks for any help you can provide.

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

How to open Ports for App running in VPC

Trying to open ports for a Windows app that I am running via VPC but the application still shows the port is unreachable.
So far I have, opened the port in Mac OSX Firewall, opened ports on my D-Link DSL504G router, disabled the Windows firewall (plus opened the ports in case it became enabled).
Have also redirected the ports to the IP address within VPC Windows and the Mac itself.
Have run out of ideas as nothing seems to work.
Regards
Alan

Try the following ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): <enter the appropriate UDP port values>
o Public TCP Port(s): <enter the appropriate TCP port values>
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How to open ports 119 and 443 in my Mac?

I've been trying to use the UseNeXT software with my Mac with no success. I called their support and they told me I need to open the ports 119 and 443. I contact Apple support and they told me that is beyond their scope (???).
Can somebody help me with that? I tried to find it online, but all tutorials that i tried didn't work or are outdated.
Thanks

Hi Drew,
It probably depends on the router as to the method used to open the ports.
As I have said elsewhere in the thread the first 1024 ports are open in most router to allow things to work Out of the Box such as Mail (110, 25, 567, 569, 995, 996 and many more ) and web Browsing (port 80 mostly but secure site can use 443) FTP (21 and 22) to name some.
Port Forwarding is one way to open some of the ports for One IP (computer).
Most routers have table for doing this and this can be limited as to the number of ports included.
This Linksys pic shows how to do it for some as it allows groups based on Start and end ports. However it restricts it to one IP
DMZ is a form of Extreme Port Forwarding that opens all 65535 ports to one IP (Computer)
In both the above cases other computers (IP addresses) are excluded from using the ports.
Port Triggering doe allow multiple computers to access the same Port but requires that you know the lead - Trigger - port involved for each app.
It is limited by the table size for your particular router.
Same Router in Trigger ports for iChat 3
Most router come with UPnP nowadays.
It is an ON/Off setting that allows the apps on the computer to say which ports are needed and when.
On some you can reduce the time to live and the Hop amounts.
The ports stay open from a period of normally 30 mins after non use.
This can be changed.
It also tends to list the number of Hops (the number of devices beyond the UPnP device) that it can be heard.
My Sky Hub
I have no other router on my network but I do sometimes use Internet Sharing between two computers hence the 2 Hops.
Every other device is only one Hop away from the the router.
There are concerns that the "Advertisement" is seen upstream (internet side) as well as device downstream.
The Concern is that this could be Up to your ISP and then down to the "next" IP end user on the particular router/server at the ISP end.
I have seen no evidence of this being the case.
Hope this helps.
8:45 pm Monday; May 5, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

TS2972 How do you port forward for Home Sharing ?

I want to home share with my apple tv and it's not working, so i think i need to port forward for home sharing on my apple tv. But i dont know how to port forward :S

I use an application called port map. http://www.codingmonkeys.de/portmap/ Make sure you download the landlubbers version. When you open it add a port called minecraft with the port 25565

How to open ports? BEFW11S4

I have to open up some ports.
My router is a BEFW11S4
I have a cable system, and the cable company tells me that when they ping I average around 6mbs .
Some of the files I have downloaded require addiontian ports to be open.
How do I do that.
thanks
BATA

Point your browser to http://192.168.1.1/ leave the username empty and enter the password for your router configuration. Then look for the port forwarding tab. Configure port forwardings for all ports you require to the LAN IP address of the computer to which the ports should go.

How to open ports 2078 and 2077

I can't seem to figure out how to do this.
I need it for a webdisk for my site but can't get these 2 porst to open so it can connect.
any help on how/where I go to do this?

I'm not entirely sure if you're using the Mac OS X Server or the Mac OS X client software version here, so the following covers both. Use of System Preferences implies client, though this is a server forum.
With Mac OS X Server 10.6, use the Server Admin tool to open up the ports you need. Launch Server Admin > select the target server > select Firewall > select Settings > select Services, open the ports, Save, etc.
With Mac OS X client 10.5.1 and later and with 10.6 and later, the firewall mechanisms and settings are application-based and not port-based, and you select the application to allow, and it can then use whatever ports it needs. System Preferences > Sharing > Advanced... and then the + to add the application. (Details: [ht1810|http://support.apple.com/kb/ht1810])
If you're running this box as a network gateway, then things can get a little more complex; I'd tend to use an external firewall if that's an option.
If you're running this as the client for the disk services (as I might guess) and if you're accessing a remote web disk on a remote system via ports 2077 (SSL) and 2078, then I wouldn't usually expect to need to open these ports on the client; it's usually the remote server system and not the client that needs to open ports. (Are you getting any diagnostic messages here? Are you looking to serve disks out to other hosts via this protocol? If so, and if you're on Mac OS X Client here, then try adding the application that serves the disks to the list of applications known to the firewall.)
As an alternative, Apple servers and servers from other providers can run WebDAV disk services via port 80, which means that most any server that allows http web connections can also allow WebDAV connections. (WebDAV is a built-in feature of this Apache web server, so most any Apple Mac OS X box can serve disk space using http port 80 and WebDAV.)
The lower level approach to opening the ports is the ipfw tool, and the command line.

Firewall in 10.5, how to open ports and how to manage?

I am pulling my hair out with the new firewall in 10.5. In 10.4 I could just set ports as I liked in the control panel, in 10.5 there is no such thing.
I need to for example open port 49999 to allow PageSender to function in my network.
I need to open port 5901 to work with JollyFast VNC, as port 5900 is used by Apple Remote Desktop and the conflict if they both use the same port.
Some of these ports I need permanent open like 59999 and others for one session and than close again, like 5901. Again in 10.4 I made the rule in the pref pane, ticked the box and Bob was your uncle. Now?
I would like to be able to see what ports are open and active on the machine. I have no idea as to where I could see this.
And at the same time I would like to keep the firewall as closed as possible as I am often on line in hotels etc.
So I need help, is there a manual somewhere someone is aware of? Or do you have any answers?

The new Application Firewall does not work in the same way as IPFW (the main firewall in 10.4).
Instead of managing ports, it simply controls the access of applications to any port. Thus, if you want PageSender to receive connections, you simply need to switch the firewall to "Set access for specific services and applications", and then add PageSender to the list, with "Allow incoming connections". When you do this, PageSender will be able to receive connections on any port that it needs to.
If you don't like this method of controlling connections, you can still use IPFW. Apple has removed the GUI, but you can download a GUI application like [NoobProof|http://www.hanynet.com/noobproof> or [WaterRoof|http://www.hanynet.com/waterroof/index.html], and you can then set access for specific ports.
There are no problems with using both IPFW and Application Firewall.
Cheers,
Rodney

How to Open new screen for single click on ALV icon.

Hi All,
Can any body help me regarding the below ALV requirement.
I need to create a executable program ZPROGRAM with a table having field to store long text.The ALV report should display records according to the selection screen parameters with a icon in each record when clicked should open a new screen with present data in the field and must be able to save the entered long text.
Can any body give me the idea after displaying the simple ALV in the output,
How to open new screen(not the Pop-ups) after single click on the icon,
in that I should be able to modify & save the long text in my ZTABLE and
able to retrieve the same text for single clicked icon record.
which function modules/Classes/Methods can we use for this requirement.
And how retrieve the same text for this record.
Thanks in advance.
Regards,
Kalam A.

*& Report ZTEST_ALV
REPORT ZTEST_ALV.
TYPE-POOLS slis.
DATA: gt_fieldcat TYPE TABLE OF slis_fieldcat_alv .
DATA: gs_layout TYPE slis_layout_alv.
DATA: gt_list_top_of_page TYPE slis_t_listheader.
DATA: gt_sortinfo_alv   TYPE slis_t_sortinfo_alv.
DATA: gs_print_alv TYPE slis_print_alv.
DATA: gs_grid TYPE lvc_s_glay.
DATA: gt_event TYPE slis_t_event.
DATA: gs_event TYPE slis_alv_event.
DATA: BEGIN OF GT_DISPLAY OCCURS 100.
   INCLUDE STRUCTURE MARA.
   DATA: BOX.
DATA: END OF GT_DISPLAY.
START-OF-SELECTION.
SELECT * FROM MARA UP TO 50 ROWS
INTO CORRESPONDING FIELDS OF TABLE GT_DISPLAY.
End-of-Selection.
PERFORM build_alv.
PERFORM display_screen .
FORM build_alv .
DATA: ls_fieldcat LIKE LINE OF gt_fieldcat.
DATA: ls_top TYPE LINE OF slis_t_listheader.
DATA: ls_sort TYPE slis_sortinfo_alv.
CLEAR: ls_fieldcat, gt_fieldcat[], ls_top,gt_list_top_of_page[],
         ls_sort,gs_grid,gs_print_alv,gt_sortinfo_alv[].
*&-----gs_layout definition.
gs_layout-zebra = 'X'.
gs_layout-detail_popup = 'X'.          "ÊÇ·ñµ¯³öÏêÏ¸ÐÅÏ¢´°¿Ú
gs_layout-f2code = '&ETA'.             "ÉèÖÃ´¥·¢µ¯³öÏêÏ¸ÐÅÏ¢´°¿ÚµÄ¹¦ÄÜÂë,ÕâÀïÊÇË«»÷
gs_layout-no_vline = ' '.              "ÉèÖÃÁÐ¼ä¸ôÏß
gs_layout-colwidth_optimize = 'X'.     "ÓÅ»¯ÁÐ¿í
gs_layout-detail_initial_lines = 'X'.
gs_layout-coltab_fieldname = 'LINE_COLOR'. "Line_colorÎªgt_displayµÄÒ»¸ö×Ö¶Î,¾ßÌåÑÕÉ«ÉèÖÃ¼ûÏÂÃæËµÃ÷.
gs_layout-hotspot_fieldname = 'MATNR'.
gs_layout-detail_titlebar = 'ÏêÏ¸ÄÚÈÝ'. "ÉèÖÃµ¯³ö´°¿ÚµÄ±êÌâÀ¸
gs_layout-group_change_edit = 'X'.
*&-----gs_grid definition.
gs_grid-top_p_only = 'X'.
*&-----gs_print_alv definition.
gs_print_alv-prnt_title = 'X'.
gs_print_alv-prnt_info = 'X'.
*&-----gt_sortinfo_alv definition. Ð¡¼Æ
ls_sort-fieldname = 'MTART'.
ls_sort-tabname = 'GT_DISPLAY'.
ls_sort-subtot = 'X'.
ls_sort-spos      = 1.
ls_sort-up        = 'X'.
ls_sort-group = 'UL'.
APPEND ls_sort TO gt_sortinfo_alv.
ls_sort-fieldname = 'AENAM'.
ls_sort-tabname = 'GT_DISPLAY'.
ls_sort-subtot = 'X'.
ls_sort-spos      = 1.
ls_sort-up        = 'X'.
ls_sort-group = 'UL'.
APPEND ls_sort TO gt_sortinfo_alv.
*&-----slis_t_listheader definition. title.
CLEAR ls_top.
ls_top-key = 'µ±Ç°ÈÕÆÚ:'.
ls_top-typ = 'S'. " H = Header, S = Selection, A = Action
CONCATENATE sy-datum0(4)   '-' sy-datum4(2) '-' sy-datum+6(2) INTO ls_top-info .
APPEND ls_top TO gt_list_top_of_page.
CLEAR ls_top.
ls_top-key = 'title'.
ls_top-typ = 'S'. " H = Header, S = Selection, A = Action
ls_top-info = space.
APPEND ls_top TO gt_list_top_of_page.
*&-----gs_print_alv definition.
gs_print_alv-prnt_title = 'X'.
gs_print_alv-prnt_info = 'X'.
*&-----gt_fieldcat definition.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
   EXPORTING
     i_program_name     = sy-repid
     i_internal_tabname = 'GT_DISPLAY'
      i_structure_name = 'MARA'
      I_CLIENT_NEVER_DISPLAY = 'X'
     i_inclname         = sy-repid
   CHANGING
     ct_fieldcat        = gt_fieldcat[]
   EXCEPTIONS
     inconsistent_interface = 1
     program_error          = 2
     OTHERS                 = 3.
ls_fieldcat-hotspot = 'X'.
MODIFY gt_fieldcat FROM ls_fieldcat INDEX 2.
**-1. definition with macro.
DEFINE macro.
   col_pos = col_pos + 1.
   ls_fieldcat-tabname   = 'it_typ_data'.
    ls_fieldcat-fieldname = '&1'.
    ls_fieldcat-seltext_l = &2.
   ls_fieldcat-col_pos   = col_pos.
    ls_fieldcat-outputlen = '&3'.
   ls_fieldcat-datatype = '&4'.
   ls_fieldcat-do_sum    = &5.
   ls_fieldcat-edit    =   &6.
   ls_fieldcat-checkbox =   &7.
   ls_fieldcat-key   =   &9.
   ls_fieldcat-fix_column = &10.
   ls_fieldcat-no_out = &11.
    ls_fieldcat-ref_fieldname = &4.    " System F4 Effect.
    ls_fieldcat-ref_tabname   = &5.   " System F4 Effect.
    ls_fieldcat-hotspot   =   &6.
    append ls_fieldcat to gt_fieldcat.
    clear ls_fieldcat.
END-OF-DEFINITION.
macro matnr     'matnr'            18   'MATNR'   'MARA' 'X'.
macro MTART     'MTART'            18      'MTART' 'MARA' ''.
macro AENAM    'AENAM'            18       'MAENAM' 'MARA'   ''.
**-2. definition one-by-one.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-seltext_s = 'ÎïÁÏ'.
ls_fieldcat-ref_fieldname = 'ROLLNAME'.
ls_fieldcat-ref_tabname   = 'DD03L'.
APPEND ls_fieldcat TO gt_fieldcat.
ENDFORM.                    "build_alv
FORM display_screen .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type     = 0
   IMPORTING
     et_events       = gt_event
   EXCEPTIONS
     list_type_wrong = 1
     OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_event INTO gs_event WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
   gs_event-form = 'TOP_OF_PAGE'.
   MODIFY gt_event FROM gs_event INDEX sy-tabix.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = sy-repid
    i_callback_pf_status_set          = 'PF_STATUS_SET '
     i_callback_user_command           = 'USER_COMMAND'
    i_callback_top_of_page            = 'TOP_OF_PAGE'
   I_CALLBACK_HTML_TOP_OF_PAGE       = 'HTML_TOP_OF_PAGE'
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
    I_BACKGROUND_ID                   = 'ALV_BACKGROUND'    "When top-of-page is initial.
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
     is_layout                         = gs_layout
     it_fieldcat                       = gt_fieldcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
    it_sort                           = gt_sortinfo_alv[]
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
   I_SAVE                            = 'A'
IS_VARIANT                        =
IT_EVENTS                         = gt_event
IT_EVENT_EXIT                     =
   IS_PRINT                          = gs_print_alv
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = gt_display
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "display_screen
FORM user_command          USING ucomm LIKE sy-ucomm
                           selfield TYPE slis_selfield.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR' "Check Box need fieldcat-checkbox, input and edit.
     IMPORTING
       E_GRID = ref1.
CASE ucomm.
    WHEN '&IC1'. " SAP standard code for double-clicking
READ TABLE gt_display INTO gs_display INDEX slis_selfield-tabindex.
CHECK sy-subrc = 0.
     CASE selfield-fieldname .
       WHEN 'PLNUM'.
         SET PARAMETER ID 'PAF' FIELD gs_display-plnum.
         CALL TRANSACTION 'MD12' AND SKIP FIRST SCREEN.
       WHEN 'POSNR'.
       SUBMIT rvscd100 USING SELECTION-SCREEN '1000' WITH vbeln = gs_display-vbeln
                                                      WITH posnr = gs_display-posnr
                                                      WITH zinfo = 'X'
                                                      AND RETURN.
     ENDCASE.
   IF selfield-sel_tab_field = 'OUT_ITAB-PI_SL'. " Line detail.
       READ TABLE i_output INTO pisl_itab INDEX selfield-tabindex.
       IF sy-subrc EQ 0.
   ENDIF.
    WHEN 'CHANGE'.
     CALL METHOD ref1->check_changed_data.
     CALL METHOD ref1->refresh_table_display.
*5´Ë´¦´úÂë×èÖ¹'REUSE_ALV_GRID_DISPLAY´´½¨ÐÂµÄÆÁÄ»£¬Ôì³ÉÆÁÄ»¶à²ã
     selfield-refresh = 'X'.
    WHEN 'SWITCH'.
     PERFORM switch_edit_mode.
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    "user_command
Add your code in user_command form.
WHEN you click matnr ucomm eq '&IC1'.
Message was edited by:
        Chunhai Hu

How to get Port Classifications for Logical Switch via scvmm console

Hello All,
We are creating some automation tool based on SCVMM console scripts.
In order to create vm we need to assign port classification based on Virtual Switch and then logical switch. The problem is that I could not find any way to retrieve port classifications assigned to logical switch (Virtual Port tab in SCVMMs logical
switch properties). There is Get-SCLogicalSwitch that return just name, description and some properties. There is also Get-SCUplinkPortProfileSet which returns Uplink tab data of SCVMMs logical switch properties. But no api to retrieve port classifications
for switch. Get-SCPortClassification also doesn't return switch assignments. Any ideas how to get this data?

I think you are looking for
Get-SCVirtualNetworkAdapterPortProfileSet.
This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

How to open Port 85 & 37777 for NVR

Similar Messages

Maybe you are looking for