How to Open Ports for HP Printers for all computers within the network (router)

Hi,
I have the EA6700 router and a few HP printers and Multi purpose printers/scanner/fax ...
When installing the print drivers, they are ok. Sending to printers are not a problem. However, the problem comes with scanning.
The HP Software ask to open a port for it... How do I do that? I checked, it seems other computers are affected by it too after changing to this new router.
I read that it can be done on the "App and gaming" section at the Security page. Do I go to the port forwarding section? But it only forward to one computer. that doesn't work...
I'd like to open a port and a lot of other IPs can print and scan from it.
Thanks

Ports are not needed to be opened on the LAN side of the router for Printers and Scanners. I recommed that tiy contact hp for help and information regarding setup and configuration of those devices. Also the addition of a external Gb network switch for these devices is recommended as well. Would help eliminate any un-necessary router configuration or processing.

Similar Messages

How do I speed up this query by ignoring computers off the network faster?

Good afternoon,
I am running the below script to query the entire domain for local admins. Could anyone reccomend a way to speed this up by more quickly skipping computers that aren't on the network? Currently, every time it reaches a computer that is not on the network
it hangs for up to 20 seconds (computers on the network return the data in less than a second). If I could decrease the ping time-out time, I could speed up this query tenfold.
Script pasted below - Thank you!!!
$Searcher = New-Object DirectoryServices.DirectorySearcher([ADSI]"")
$Searcher.Filter = "(objectClass=computer)"
$Computers = ($Searcher.Findall())
md C:\Reports\IBX_Local_Admins_ALL
Foreach ($Computer in $Computers)
$Path=$Computer.Path
$Name=([ADSI]"$Path").Name
write-host $Name
$members =[ADSI]"WinNT://$Name/Administrators"
$members = @($members.psbase.Invoke("Members"))
$members | foreach {$_.GetType().InvokeMember("Name", 'GetProperty',
$null, $_, $null) | out-file -append C:\Reports\IBX_Local_Admins_ALL\$name.txt

This version will not fail no matter what is in the group.
function Get-LocalAdmins{
[CmdLetBinding()]
Param(
[Parameter(
Mandatory=$true,
ValueFromPipeline=$true,
Position=0
)]$computer
Process{
Write-Verbose "Polling system: $computer"
if(Test-Connection $Computer -quiet -count 1){
$group=[ADSI]"WinNT://$computer/Administrators"
$group.Invoke("Members") |
ForEach-Object{
New-Object PsObject -Property @{
Computer=$Computer
aDSPath=$_.GetType().InvokeMember('aDSPath', 'GetProperty',$null, $_, $null)
#UserID=$_.GetType().InvokeMember('Name', 'GetProperty',$null, $_, $null)
}else{
Write-Warning "System not found: $computer"
$computers=([adsisearcher]'(objectClass=computer)').FindAll() |%{$_.Properties['name']}
$computers | Get-LocalAdmins -verbose
¯\_(ツ)_/¯
Hi JRV,
Thank you for your help so far! When I ran the above version, it seemed to be going fine but it stopped at a certain point saying the script was "successful", but it only queried 148 computers. I should note that it is also the same 148 computers each time
I run it. No errors, it just stops and says successful. Any ideas?
TY!

Total Newbee, How to open ports 5198 and 5199 for Amateur Radio software program

I am a Amateur Radio operator using a software program called Echo Link which will enable me to talk to other radio operators around the would through repeaters running this software. I need to open ports 5198 and 5199 in my Airport Time Capsule for this software to work. How do I open these ports? They talk about mapping the ports which I don't understand. Below is a screen shot of an older version of Airport that shows what I want to do.
I tried to do it but it does not work and I can't change the private IP Address. Here is a screen shot of what I tried to do below. Thanks for any help you can provide.

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

How i can export and distribute setting; network.automatic-ntlm-auth.trusted-uris" to all computers in the network (With Folder Rederiction enabled)?

Hi,
We are about to enable SSO in our environment. As a result, I need to modify the value for user_pref("network.automatic-ntlm-auth.trusted-uris", "my domain");>>prefs.js.
I created a simple .bat file to make the necessary mod and add the line to pref.js. When I run the file it outputs the prefs.js to the same location, not the Mozilla AppData folder. We are a Win7 environment with folder redirection enabled. Therefore, our user's Mozilla AppData folder is located at \\my domain\dfs\XenDesktop\Profiles\username\AppData\Mozilla\Firefox\Profiles\default (random default profile name). My question is what is the best course of action to add this pref. to all PC user's pref.js file? keep in mind the pref.js is located on the hidden network path I included above. I apologize if my question is not easy to understand.

cor-el, thanks for you reply.
Yesterday, prior to my post, I did try the mozilla.cfg method. I read your reply to another FF user's, similar question. Here are my complete steps.
1. created a txt file with the following info: defaultPref("network.automatic-ntlm-auth.trusted-uris", "ngs.org"); // set new default value
2. saved the file as mozilla.cfg
3. dropped the file in C:\Program Files (x86)\Mozilla Firefox
4. Created local-settings.js with the following info:
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
5. dropped the file in C:\Program Files (x86)\Mozilla Firefox\defaults\pref
When I launch Firefox the network.automatic-ntlm-auth.trusted-uris should say ngs.org, but the value is still blank.
Any help is greatly appreciated.

How to open Adobe ID CC in 2 different computers with the same Adobe ID?

I'm normaly using InDesign CC in my desktop. Now, I need to open this application in my laptop using the same Adobe ID and account. How can I do it?. I downloaded the InDesign CC in the laptop and gave me a 30 days trial period. When I try to license the software it ask for a license serial number which I do not have. It doesn't give me the option os licensing using my Adobe ID and password.
What should I do? Should I keep using the software till the end of the trial period?.
Thanks very much for any help.

Go to your Creative Cloud admin page using a browser on the laptop and sign-in there to CC using your CC-code.
Dave

Kindly advise how i can export and distribute settings done on "about:config == network.automatic-ntlm-auth.trusted-uris" to all computers in the network. What is the best way to effect this changes on all Machines?

I want user to access sharepoint on Mozilla without being prompted for credentials instead it should use logged on credentials

Hi Meshackl, there is a very simple way with the distribution.ini file. Mike Kaply describes how to do that here:
http://mike.kaply.com/2012/03/26/customizing-firefox-distribution-ini/

Opening Ports on Airport Express for GTA IV

I am told that to play Grand Theft Auto 4 (GTA 4) properly, I need to "open ports" on my router and enable UPnP (Universal Plug-n-Play).
The ports I am supposed to open are:
UDP
3478
3479
6672
28900
TCP
80
443
5223
3478
3479
3480
8001
8080
27900
On my Windows 2000 machine, using the AirPort Admin Utility, when I configure the AirPort, I get a window that has a "port mapping" tab.
Is this how I open the ports listed above? If so, it asks for a private IP address, Public Port, and Private port. How do all these relate to the port numbers above?
In the configure base station window, i can't find any mention of how to enable UPnP
Thanks!!!!!
PS, don't hate on me for having a PC, i'm just waiting until Apple comes out with a BluRay capable laptop...
Message was edited by: Psychos40

Hello Psychos40. Welcome to the Apple Discussions!
On my Windows 2000 machine, using the AirPort Admin Utility, when I configure the AirPort, I get a window that has a "port mapping" tab.
Is this how I open the ports listed above? If so, it asks for a private IP address, Public Port, and Private port. How do all these relate to the port numbers above?
Yes.
To setup Port Mapping:
Assign a manual IP to the host device
The "host" device is the computer that will be hosting GTA and needs to be accessed from the Internet. Under Windows 2000, you would use Network Settings to assign a static IP address to this computer. Note: Be sure to assign an IP address outside of the DHCP range provided by the AirPort Express Base Station (AX) default range of 10.0.1.2 - 10.0.1.200, like 10.0.1.201
To setup port mapping on an AirPort Express Base Station (AX), connect to the AX's wireless network, and then use the AirPort Admin Utility to change these settings:
Port Mapping tab
o Click "Add"
o Public Port: <enter the Port # which will be accessed from the Internet>
o Private Address: <enter the static IP address from above>
o Private Port: <either enter the same value as the Public port or the value you want your application/service to answer on>
o Click "Ok"
o Repeat the last series of steps for each port you wish to map.
In the configure base station window, i can't find any mention of how to enable UPnP
Unfortunately, that's because the AirPorts do not support UPnP. Instead, the AirPorts have a similar feature known as "NAT Port Mapping Protocol." You enable/disable this function on the Ethernet Port Security tab under Base Station Option within the AirPort Admin Utility. Note: Although NPmP is similar, it is not the same as UPnP and may not offer the same features. If GTA requires UPnP, the AirPort's NPmP feature may not support it.

How to open and close posting period for both material , n invoicing

HI
how to open and close posting period for both material , n invoicing , AM NEW TO SD , SO ALL DOUBTS I DO POST IN HERE PLEASE DONT MIND

Hi Sunaina
Period Open T.code: MMP1
Period Close T-Code: MMPV
Automate the opening of MM periods
How can you automate the monthly opening of MM periods (transaction MMPV - program RMMMPERI) with
SM36?
RMMMPERI accepts a period/year or a date.
If you enter a date the period is derived by it.
1. create a variant and check the attribute 'selection variable' for the parameter date. Then click the button 'Selection variables' and set the current date. Every time this variant is used the parameter DATE is filled with the current date.
2. create a job for RMMMPERI with the variant created in the preceding step. Set it as periodic.
If you're not using a fiscal year variant simply schedule it as monthly (to be executed the first day of the month).
If you are using a fiscal year variant you'd have to define a calendar with only the first day of each period defined as working
day and use it in the periodicity restrictions.
Another possibility:
Write a very simple ABAP which run daily to check if the period has changed and submit RMMMPERI.
Reward if useful to u

How to open port 8000 (outward)

Can someone please explain how to open port 8000 for streaming Nicecast to my (network) IceCast2 server? Thanks!

If all you are using is the inbuilt firewall then it shouldn't be blocking outward connections.

Firewall in 10.5, how to open ports and how to manage?

I am pulling my hair out with the new firewall in 10.5. In 10.4 I could just set ports as I liked in the control panel, in 10.5 there is no such thing.
I need to for example open port 49999 to allow PageSender to function in my network.
I need to open port 5901 to work with JollyFast VNC, as port 5900 is used by Apple Remote Desktop and the conflict if they both use the same port.
Some of these ports I need permanent open like 59999 and others for one session and than close again, like 5901. Again in 10.4 I made the rule in the pref pane, ticked the box and Bob was your uncle. Now?
I would like to be able to see what ports are open and active on the machine. I have no idea as to where I could see this.
And at the same time I would like to keep the firewall as closed as possible as I am often on line in hotels etc.
So I need help, is there a manual somewhere someone is aware of? Or do you have any answers?

The new Application Firewall does not work in the same way as IPFW (the main firewall in 10.4).
Instead of managing ports, it simply controls the access of applications to any port. Thus, if you want PageSender to receive connections, you simply need to switch the firewall to "Set access for specific services and applications", and then add PageSender to the list, with "Allow incoming connections". When you do this, PageSender will be able to receive connections on any port that it needs to.
If you don't like this method of controlling connections, you can still use IPFW. Apple has removed the GUI, but you can download a GUI application like [NoobProof|http://www.hanynet.com/noobproof> or [WaterRoof|http://www.hanynet.com/waterroof/index.html], and you can then set access for specific ports.
There are no problems with using both IPFW and Application Firewall.
Cheers,
Rodney

Don't know how to open ports

Hello.
Could someone please tell me how to open ports on my LinkSys WRV200 Wireless-G VPN Router.
Thank you.

Open up internet explorer. On the address bar type the numbers 192.168.1.1 (username is admin, password is admin as well). Go to the Firewall tab. Depending on what kind of port opening you want, you either click on the Port Triggering or Port Forwarding subtab.
If you are hosting a certain program or application, use port forwarding. If you are just simply trying to use and access it, use port triggering.

How to open Camera Raw in Bridge, it comes up with the following error

How to open Camera Raw in Bridge, it comes up with the following error Bridge parent application is not Active   Bridge requires that a qualifing product has been lanched at least once to enable this feature. It opens in Photoshop CS6 & Elements 10 but not Bridge?

You need to look at all programs in your uninstall list, and see if you spot any old trials that are no longer active.
Camera Raw in Bridge and PS are the same program, so its not the program but access. Would have been nice it you had stated OS, but here are locatons of camera raw for both OS.
Win           Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS5/Adobe Photoshop CS5 Settings    note: appdata a hidden file.
Mac          Users/[user name]/Library/Preferences

My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

HT201210 which version of ios 6 beta is the correct download for ipad3 wifi+celluar ... within the uk.

hello, which version of ios 6 beta is the correct download for ipad3 wifi+celluar ... within the uk.
many thanks
stuart

i do apologise - i am a developer an have succesffuly installed all beta on my current devices... but i live in the uk, and do not have the verizon or att network, so therefore could not find the correct download for my ipad3...
i have emailed support but no response
stuart

How can open mobile passcode of i5 phone if we forget the passcode of mobile?, how can open mobile passcode of i5 phone if we forget the passcode of mobile?

dear sir
how can open mobile passcode of i5 phone if we forget the passcode of mobile?, how can open mobile passcode of i5 phone if we forget the passcode of mobile?
thanks
raj
mail id [email protected]

Do as the manual says and restore the iphone

How to Open Ports for HP Printers for all computers within the network (router)

Similar Messages

Maybe you are looking for